[Fri Feb 17 10:37:56 2012] Detection parameters:
  Position = (247.2, 399.8) = 0 30 48.15 4 58 9.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.6 +/- 25.6
  Background counts = 224.5
  Rate = 0.001 +/- 0.0002

[Fri Feb 17 10:37:56 2012] Off-axis axis estimate = 8.23'
[Fri Feb 17 10:41:13 2012] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 10:41:13 2012] Initial guess for spatial extent in simple fitting = 10.55"
[Fri Feb 17 10:41:13 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.052
[Fri Feb 17 10:41:13 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.55"
[Fri Feb 17 11:58:50 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src31.ximg exists
[Fri Feb 17 11:58:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src31.csv
[Fri Feb 17 11:58:50 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src31_1.ximg exists
[Fri Feb 17 11:58:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src31.csv
[Fri Feb 17 11:58:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 11:58:50 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Fri Feb 17 11:58:50 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Fri Feb 17 11:58:50 2012] Fit fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Fri Feb 17 13:06:09 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 12.163844 pixels away
[Fri Feb 17 13:06:09 2012] Source 31 is offset by 2.481186 and 8.334478 pixels which is larger than
2 X fitted extent = 1.213641 x 1.213641, not incorporating fit results
[Fri Feb 17 13:06:09 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 13:06:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 13:06:09 2012] Assessing source extent using major
[Fri Feb 17 13:06:09 2012] Source does appear to be extended
[Fri Feb 17 13:06:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 13:06:25 2012] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 13:06:25 2012] Initial guess for spatial extent in simple fitting = 10.55"
[Fri Feb 17 13:06:25 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.052
[Fri Feb 17 13:06:25 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 10.55"
[Fri Feb 17 14:17:11 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src31.ximg exists
[Fri Feb 17 14:17:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src31.csv
[Fri Feb 17 14:17:11 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri Feb 17 14:17:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src31.csv
[Fri Feb 17 14:17:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 14:17:12 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri Feb 17 14:17:12 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Feb 17 14:17:12 2012] Fit fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Fri Feb 17 15:18:51 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 14.419215 pixels away
[Fri Feb 17 15:18:51 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 15:18:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 15:18:51 2012] Assessing source extent using major
[Fri Feb 17 15:18:51 2012] Source does appear to be extended
[Fri Feb 17 15:18:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 15:19:07 2012] XMMSAS src. selection expression = ellipse(21460.572021, 34735.925598, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 17 15:19:07 2012] Writing source region out to fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src31_src.reg
[Fri Feb 17 15:19:07 2012] Extracting stamp from image fullrun_mos1_xmm0502290101_pi300-10000_cl_sm2.00.img.gz, (210, 362) - (285, 437)
[Fri Feb 17 15:19:07 2012] XMMSAS bgd. selection expression = annulus(21460.572021, 34735.925598, 1087.500000, 2175.000000, X, Y) && !ellipse(19570.507111, 35953.352112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22579.704160, 34855.978000, 387.920011, 387.920011, 0.000000, X, Y)
[Fri Feb 17 15:19:07 2012] Writing fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src31.gif
[Fri Feb 17 15:29:39 2012] Mean detx,y = (5009.56, -8870.00) 
[Fri Feb 17 15:29:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 15:29:54 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 15:29:54 2012] Setting source spectrum file to fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Feb 17 15:29:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Fri Feb 17 16:28:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 17 16:28:06 2012] rmf not generated due to insufficient counts
[Fri Feb 17 18:12:17 2012] Updating aperture counts using extracted products
[Fri Feb 17 18:12:17 2012] Error reading totcts from fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Feb 17 18:12:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 18:12:18 2012] Using photon index=1.80, rate=0.00129, arf fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src31.arf
[Fri Feb 17 18:12:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 18:12:18 2012] Updating source flux to 2.4e-14
[Fri Feb 17 18:12:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting