[Fri Feb 17 10:37:56 2012] Detection parameters:
  Position = (260.2, 401.0) = 0 30 44.39 4 58 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.6 +/- 24.1
  Background counts = 228.5
  Rate = 0.002 +/- 0.0004

[Fri Feb 17 10:37:56 2012] Off-axis axis estimate = 7.94'
[Fri Feb 17 10:41:13 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 10:41:13 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Fri Feb 17 10:41:13 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.077
[Fri Feb 17 10:41:13 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 10.40"
[Fri Feb 17 11:58:50 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src30.ximg exists
[Fri Feb 17 11:58:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src30.csv
[Fri Feb 17 11:58:50 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri Feb 17 11:58:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src30.csv
[Fri Feb 17 11:58:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 11:58:50 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri Feb 17 11:58:50 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Feb 17 11:58:50 2012] Fit fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Fri Feb 17 13:06:09 2012] Warning, spatial fit 30 centroid is now closest to src. 31
[Fri Feb 17 13:06:09 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 13:06:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 13:06:09 2012] Assessing source extent using major
[Fri Feb 17 13:06:09 2012] Source does appear to be extended
[Fri Feb 17 13:06:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 13:06:25 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 13:06:25 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Fri Feb 17 13:06:25 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.077
[Fri Feb 17 13:06:25 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 10.40"
[Fri Feb 17 14:17:11 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src30.ximg exists
[Fri Feb 17 14:17:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src30.csv
[Fri Feb 17 14:17:11 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Feb 17 14:17:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src30.csv
[Fri Feb 17 14:17:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 14:17:12 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Feb 17 14:17:12 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Feb 17 14:17:12 2012] Fit fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Fri Feb 17 15:18:51 2012] Spatial fit model total counts = 622.990000, observed total counts = 623.000000
[Fri Feb 17 15:18:51 2012] Offset between fit and detection position for source 30 = 0.175006 pixels
[Fri Feb 17 15:18:51 2012] 618.295300 total counts/ 557.276000 bgd. counts: snr = 2.584830
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.175006 pixels
  Position = (260.1, 401.2) = 0 30 44.41 4 58 15.0
  Extent = 4.8 (2.7-6.7)", rotation angle = 0
  Source counts = 61.0 +/- 24.9
  Background counts = 557.3
  Rate = 0.0006 +/- 0.0002
[Fri Feb 17 15:18:51 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 15:18:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 15:18:51 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 15:18:51 2012] Source does appear to be extended
[Fri Feb 17 15:18:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 15:19:07 2012] XMMSAS src. selection expression = ellipse(22579.704160, 34855.978000, 290.940008, 290.940008, 0.000000, X, Y)
[Fri Feb 17 15:19:07 2012] Writing source region out to fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src30_src.reg
[Fri Feb 17 15:19:07 2012] Extracting stamp from image fullrun_mos1_xmm0502290101_pi300-10000_cl_sm2.00.img.gz, (243, 384) - (277, 418)
[Fri Feb 17 15:19:07 2012] XMMSAS bgd. selection expression = annulus(22579.704160, 34855.978000, 484.900014, 969.800028, X, Y) && !ellipse(21460.572021, 34735.925598, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 17 15:19:07 2012] Writing fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src30.gif
[Fri Feb 17 15:29:25 2012] Mean detx,y = (5552.58, -7890.06) 
[Fri Feb 17 15:29:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 15:29:34 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 15:29:34 2012] Setting source spectrum file to fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Feb 17 15:29:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Feb 17 16:28:01 2012] Not generating rmf since there are only 61 counts
[Fri Feb 17 16:28:01 2012] rmf not generated due to insufficient counts
[Fri Feb 17 18:12:17 2012] Updating aperture counts using extracted products
[Fri Feb 17 18:12:17 2012] Error reading totcts from fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Feb 17 18:12:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 18:12:18 2012] Using photon index=1.80, rate=0.000577, arf fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src30.arf
[Fri Feb 17 18:12:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 18:12:18 2012] Updating source flux to 1.3e-14
[Fri Feb 17 18:12:21 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting