[Fri Feb 17 10:37:55 2012] Detection parameters:
  Position = (267.0, 486.1) = 0 30 42.41 5 4 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.2 +/- 29.2
  Background counts = 124.0
  Rate = 0.001 +/- 0.0002

[Fri Feb 17 10:37:56 2012] Off-axis axis estimate = 13.79'
[Fri Feb 17 10:41:13 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 10:41:13 2012] Initial guess for spatial extent in simple fitting = 13.33"
[Fri Feb 17 10:41:13 2012] source mask rpix=3.1, npix_max = 50, mask sum = 52, frac = 1.024
[Fri Feb 17 10:41:13 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 13.33"
[Fri Feb 17 11:58:50 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src26.ximg exists
[Fri Feb 17 11:58:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src26.csv
[Fri Feb 17 11:58:50 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri Feb 17 11:58:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src26.csv
[Fri Feb 17 11:58:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 11:58:50 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri Feb 17 11:58:50 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri Feb 17 11:58:50 2012] Fit fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Fri Feb 17 13:06:09 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 14.483975 pixels away
[Fri Feb 17 13:06:09 2012] Warning, spatial fit 26 centroid is now closest to src. 12
[Fri Feb 17 13:06:09 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 10.009074 pixels away
[Fri Feb 17 13:06:09 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 13:06:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 13:06:09 2012] Assessing source extent using major
[Fri Feb 17 13:06:09 2012] Source does appear to be extended
[Fri Feb 17 13:06:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 13:06:09 2012] Source is confused with source 12
[Fri Feb 17 13:06:25 2012] Using EEF radius (= 13.33 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 13:06:25 2012] Initial guess for spatial extent in simple fitting = 13.33"
[Fri Feb 17 13:06:25 2012] source mask rpix=3.1, npix_max = 50, mask sum = 52, frac = 1.024
[Fri Feb 17 13:06:25 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 13.33"
[Fri Feb 17 14:17:11 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src26.ximg exists
[Fri Feb 17 14:17:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src26.csv
[Fri Feb 17 14:17:11 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Feb 17 14:17:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src26.csv
[Fri Feb 17 14:17:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 14:17:11 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Feb 17 14:17:11 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Feb 17 14:17:11 2012] Fit fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Fri Feb 17 15:18:51 2012] Warning, spatial fit 26 centroid is now closest to src. 43
[Fri Feb 17 15:18:51 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 18.206142 pixels away
[Fri Feb 17 15:18:51 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 15:18:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 15:18:51 2012] Assessing source extent using major
[Fri Feb 17 15:18:51 2012] Source does appear to be extended
[Fri Feb 17 15:18:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 15:19:07 2012] XMMSAS src. selection expression = ellipse(23178.357391, 42240.262360, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 17 15:19:07 2012] Writing source region out to fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src26_src.reg
[Fri Feb 17 15:19:07 2012] Extracting stamp from image fullrun_mos1_xmm0502290101_pi300-10000_cl_sm2.00.img.gz, (229, 449) - (304, 524)
[Fri Feb 17 15:19:07 2012] XMMSAS bgd. selection expression = annulus(23178.357391, 42240.262360, 1087.500000, 2175.000000, X, Y) && !ellipse(21912.641205, 42192.947083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23795.642000, 41940.000000, 2132.080061, 2132.080061, 0.000000, X, Y) && !ellipse(21348.059845, 41457.063232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22448.954000, 42743.786000, 1967.712057, 1967.712057, 0.000000, X, Y)
[Fri Feb 17 15:19:07 2012] Writing fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src26.gif
[Fri Feb 17 15:28:01 2012] Mean detx,y = (12535.24, -10186.95) 
[Fri Feb 17 15:28:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 15:28:11 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 15:28:11 2012] Setting source spectrum file to fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Feb 17 15:28:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri Feb 17 16:27:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 17 16:27:16 2012] rmf not generated due to insufficient counts
[Fri Feb 17 18:12:17 2012] Updating aperture counts using extracted products
[Fri Feb 17 18:12:17 2012] Error reading totcts from fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Feb 17 18:12:18 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 18:12:18 2012] Using photon index=1.80, rate=0.00118, arf fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src26.arf
[Fri Feb 17 18:12:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 18:12:18 2012] Updating source flux to 4.3e-14
[Fri Feb 17 18:12:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting