[Fri Feb 17 10:37:55 2012] Detection parameters:
  Position = (318.9, 310.2) = 0 30 27.30 4 51 39.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5439.7 +/- 92.2
  Background counts = 266.0
  Rate = 0.04 +/- 0.0007

[Fri Feb 17 10:37:56 2012] Off-axis axis estimate = 1.71'
[Fri Feb 17 10:41:13 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 10:41:13 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Feb 17 10:41:13 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Fri Feb 17 10:41:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Feb 17 11:58:49 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Feb 17 11:58:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src1.csv
[Fri Feb 17 11:58:49 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Feb 17 11:58:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src1.csv
[Fri Feb 17 11:58:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 11:58:50 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 11:58:50 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 11:58:50 2012] Fit fullrun_mos1_xmm0502290101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 13:06:09 2012] Spatial fit model total counts = 4476.000000, observed total counts = 4476.000000
[Fri Feb 17 13:06:09 2012] Offset between fit and detection position for source 1 = 0.152489 pixels
[Fri Feb 17 13:06:09 2012] 4495.890000 total counts/ 1443.680000 bgd. counts: snr = 80.330217
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.152489 pixels
  Position = (318.8, 310.3) = 0 30 27.33 4 51 39.7
  Extent = 5.3 (5.2-5.5)", rotation angle = 0
  Source counts = 3052.2 +/- 67.1
  Background counts = 1443.7
  Rate = 0.03 +/- 0.0006
[Fri Feb 17 13:06:09 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 13:06:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 13:06:09 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 13:06:09 2012] Source does appear to be extended
[Fri Feb 17 13:06:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 13:06:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 13:06:25 2012] Initial guess for spatial extent in simple fitting = 5.33"
[Fri Feb 17 13:06:25 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.755
[Fri Feb 17 13:06:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.33"
[Fri Feb 17 14:17:11 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 17 14:17:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src1.csv
[Fri Feb 17 14:17:11 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 17 14:17:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src1.csv
[Fri Feb 17 14:17:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 14:17:11 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 14:17:11 2012] fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 14:17:11 2012] Fit fullrun_mos1_xmm0502290101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 15:18:51 2012] Spatial fit model total counts = 4453.000000, observed total counts = 4453.000000
[Fri Feb 17 15:18:51 2012] Offset between fit and detection position for source 1 = 0.006459 pixels
[Fri Feb 17 15:18:51 2012] 4484.170000 total counts/ 1446.180000 bgd. counts: snr = 79.886826
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.006459 pixels
  Position = (318.8, 310.3) = 0 30 27.33 4 51 39.7
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 3038.0 +/- 67.0
  Background counts = 1446.2
  Rate = 0.03 +/- 0.0006
[Fri Feb 17 15:18:51 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 15:18:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 15:18:51 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 15:18:51 2012] Source does appear to be extended
[Fri Feb 17 15:18:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 15:19:07 2012] Counts = 3037.990000, rescaling region sizes by 2.000000
[Fri Feb 17 15:19:07 2012] XMMSAS src. selection expression = ellipse(27683.774400, 26949.309800, 636.639697, 636.639697, 0.000000, X, Y)
[Fri Feb 17 15:19:07 2012] Writing source region out to fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src1_src.reg
[Fri Feb 17 15:19:07 2012] Extracting stamp from image fullrun_mos1_xmm0502290101_pi300-10000_cl_sm2.00.img.gz, (282, 274) - (355, 347)
[Fri Feb 17 15:19:07 2012] XMMSAS bgd. selection expression = annulus(27683.774400, 26949.309800, 2122.132323, 4244.264646, X, Y) && !ellipse(33190.404000, 26204.875600, 1522.872044, 1522.872044, 0.000000, X, Y) && !ellipse(32233.451630, 24389.502106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30734.797200, 25145.082400, 329.207209, 329.207209, 0.000000, X, Y) && !ellipse(31600.156580, 23411.225000, 311.584809, 311.584809, 0.000000, X, Y) && !ellipse(29651.798600, 31350.121600, 397.366411, 397.366411, 0.000000, X, Y) && !ellipse(23781.092040, 28853.730000, 342.652010, 342.652010, 0.000000, X, Y) && !ellipse(32957.976000, 27273.767400, 1496.072043, 950.600027, 123.907600, X, Y) && !ellipse(29403.306400, 24813.733200, 376.760011, 376.760011, 0.000000, X, Y)
[Fri Feb 17 15:19:07 2012] Writing fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src1.gif
[Fri Feb 17 15:19:13 2012] Mean detx,y = (232.82, -130.38) 
[Fri Feb 17 15:19:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 15:19:29 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 15:19:29 2012] Setting source spectrum file to fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 17 15:19:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Feb 17 18:12:16 2012] Updating aperture counts using extracted products
[Fri Feb 17 18:12:17 2012] Error reading totcts from fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 17 18:12:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 18:12:17 2012] Using photon index=1.80, rate=0.0287, arf fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src1.arf
[Fri Feb 17 18:12:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 18:12:17 2012] Updating source flux to 2.8e-13
[Fri Feb 17 18:15:52 2012] Reading fit data from xmm0502290101/analysis//spectral/fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Feb 17 18:15:52 2012] Spectral fit parameter nH value = 2.11742e+21
[Fri Feb 17 18:15:52 2012] Spectral fit parameter PhoIndex value = 4.45979
[Fri Feb 17 18:15:52 2012] Failed to get F(0.3-8.0) from xmm0502290101/analysis//spectral/fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 18:15:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 18:15:52 2012] Using Nh = 2.1e+21, photon index=4.46, rate=0.0287, arf fullrun_mos1_xmm0502290101_pi300-10000_pass1_cl_src1.arf
[Fri Feb 17 18:15:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 18:15:52 2012] Updating source flux to 1.8e-13