[Thu Mar 29 19:46:17 2012] Detection parameters:
  Position = (292.2, 275.9) = 7 21 53.52 71 20 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 243954.8 +/- 582.0
  Background counts = 1113.5
  Rate = 5 +/- 0.01

[Thu Mar 29 19:46:18 2012] Off-axis axis estimate = 1.69'
[Thu Mar 29 20:10:11 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 20:10:11 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu Mar 29 20:10:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Thu Mar 29 20:10:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Thu Mar 29 20:26:46 2012] fullrun_pn_xmm0502271401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 29 20:26:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502271401_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 20:26:46 2012] fullrun_pn_xmm0502271401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 29 20:26:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502271401_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 20:26:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502271401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502271401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 20:26:47 2012] fullrun_pn_xmm0502271401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 29 20:26:47 2012] fullrun_pn_xmm0502271401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 29 20:26:47 2012] Fit fullrun_pn_xmm0502271401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 29 21:30:33 2012] Spatial fit model total counts = 209594.000000, observed total counts = 224686.000000
[Thu Mar 29 21:30:33 2012] Offset between fit and detection position for source 1 = 0.073050 pixels
[Thu Mar 29 21:30:33 2012] 209278.000000 total counts/ 25600.000000 bgd. counts: snr = 1147.987500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.073050 pixels
  Position = (292.1, 275.9) = 7 21 53.57 71 20 36.6
  Extent = 6.3 (6.3-6.3)", rotation angle = 0
  Source counts = 183678.0 +/- 457.5
  Background counts = 25600.0
  Rate = 3 +/- 0.006
[Thu Mar 29 21:30:33 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 21:30:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 21:30:33 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 21:30:33 2012] Source does appear to be extended
[Thu Mar 29 21:30:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 21:30:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 21:30:53 2012] Initial guess for spatial extent in simple fitting = 6.32"
[Thu Mar 29 21:30:53 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.049
[Thu Mar 29 21:30:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.32"
[Thu Mar 29 21:48:56 2012] fullrun_pn_xmm0502271401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 29 21:48:56 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502271401_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 21:48:56 2012] fullrun_pn_xmm0502271401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 29 21:48:56 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0502271401_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 21:48:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502271401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502271401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 21:48:56 2012] fullrun_pn_xmm0502271401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 29 21:48:56 2012] fullrun_pn_xmm0502271401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 29 21:48:56 2012] Fit fullrun_pn_xmm0502271401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 29 22:50:09 2012] Spatial fit model total counts = 210043.000000, observed total counts = 224686.000000
[Thu Mar 29 22:50:09 2012] Offset between fit and detection position for source 1 = 0.001464 pixels
[Thu Mar 29 22:50:09 2012] 209297.000000 total counts/ 25600.000000 bgd. counts: snr = 1148.106250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001464 pixels
  Position = (292.1, 275.9) = 7 21 53.57 71 20 36.6
  Extent = 6.3 (6.3-6.3)", rotation angle = 0
  Source counts = 183697.0 +/- 457.5
  Background counts = 25600.0
  Rate = 3 +/- 0.006
[Thu Mar 29 22:50:09 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 22:50:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 22:50:09 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 22:50:09 2012] Source does appear to be extended
[Thu Mar 29 22:50:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 22:50:27 2012] Counts = 183697.000000, rescaling region sizes by 3.000000
[Thu Mar 29 22:50:27 2012] XMMSAS src. selection expression = ellipse(25365.819340, 23951.024800, 1138.707033, 1138.707033, 0.000000, X, Y)
[Thu Mar 29 22:50:27 2012] Writing source region out to fullrun_pn_xmm0502271401_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 29 22:50:27 2012] Extracting stamp from image fullrun_pn_xmm0502271401_pi300-10000_cl_sm2.00.img.gz, (227, 210) - (358, 341)
[Thu Mar 29 22:50:27 2012] XMMSAS bgd. selection expression = annulus(25365.819340, 23951.024800, 5693.535164, 11387.070328, X, Y) && !ellipse(24083.749000, 27630.496400, 1181.872034, 1181.872034, 0.000000, X, Y) && !ellipse(26641.657257, 26541.769745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24905.172000, 25581.680000, 1113.640032, 1113.640032, 0.000000, X, Y) && !ellipse(22906.450746, 24480.456556, 1301.296037, 499.471025, 349.004430, X, Y) && !ellipse(22478.592560, 23696.735931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23289.236725, 22831.525604, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 29 22:50:27 2012] Writing fullrun_pn_xmm0502271401_pi300-10000_pass1_cl_src1.gif
[Thu Mar 29 22:56:02 2012] Mean detx,y = (96.81, -189.48) 
[Thu Mar 29 22:56:25 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 22:59:08 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 22:59:09 2012] Setting source spectrum file to fullrun_pn_xmm0502271401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 29 22:59:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502271401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar 30 02:04:19 2012] Updating aperture counts using extracted products
[Fri Mar 30 02:04:19 2012] Error reading totcts from fullrun_pn_xmm0502271401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 30 02:04:19 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 02:04:19 2012] Using photon index=1.80, rate=2.57, arf fullrun_pn_xmm0502271401_pi300-10000_pass1_cl_src1.arf
[Fri Mar 30 02:04:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 02:04:19 2012] Updating source flux to 5.8e-12
[Fri Mar 30 02:08:09 2012] Reading fit data from xmm0502271401/analysis//spectral/fullrun_pn_xmm0502271401_pi300-10000_pass1_cl_src1_pl.csv
[Fri Mar 30 02:08:09 2012] Spectral fit parameter nH value = 1.70501e+12
[Fri Mar 30 02:08:09 2012] Spectral fit parameter PhoIndex value = 1.91658
[Fri Mar 30 02:08:09 2012] Failed to get F(0.3-8.0) from xmm0502271401/analysis//spectral/fullrun_pn_xmm0502271401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Mar 30 02:08:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 02:08:09 2012] Using Nh = 1.7e+12, photon index=1.92, rate=2.57, arf fullrun_pn_xmm0502271401_pi300-10000_pass1_cl_src1.arf
[Fri Mar 30 02:08:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 02:08:09 2012] Updating source flux to 5.3e-12