[Thu Mar 29 19:46:40 2012] Detection parameters:
  Position = (374.5, 132.0) = 7 20 39.47 71 10 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.2 +/- 23.2
  Background counts = 146.7
  Rate = 0.002 +/- 0.0003

[Thu Mar 29 19:46:40 2012] Off-axis axis estimate = 13.27'
[Thu Mar 29 20:26:47 2012] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 20:26:47 2012] Initial guess for spatial extent in simple fitting = 13.06"
[Thu Mar 29 20:26:47 2012] source mask rpix=3.0, npix_max = 49, mask sum = 47, frac = 0.958
[Thu Mar 29 20:26:47 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 13.06"
[Thu Mar 29 21:01:38 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_src9.ximg exists
[Thu Mar 29 21:01:38 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Mar 29 21:01:38 2012] Fit fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_src9 appears to have run properly
[Thu Mar 29 21:01:39 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Mar 29 21:01:39 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Mar 29 21:01:39 2012] Fit fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Mar 29 21:30:39 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 13.026060 pixels away
[Thu Mar 29 21:30:39 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 21:30:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 21:30:39 2012] Assessing source extent using major
[Thu Mar 29 21:30:39 2012] Source does appear to be extended
[Thu Mar 29 21:30:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 21:48:56 2012] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 21:48:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 29 21:48:56 2012] Initial guess for spatial extent in simple fitting = 13.06"
[Thu Mar 29 21:48:56 2012] source mask rpix=3.0, npix_max = 49, mask sum = 47, frac = 0.958
[Thu Mar 29 21:48:56 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 13.06"
[Thu Mar 29 22:17:09 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_src9.ximg exists
[Thu Mar 29 22:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_src9.csv
[Thu Mar 29 22:17:09 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Mar 29 22:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_src9.csv
[Thu Mar 29 22:17:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 22:17:09 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Mar 29 22:17:09 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Mar 29 22:17:09 2012] Fit fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Mar 29 22:50:13 2012] Warning, spatial fit 9 centroid is now closest to src. 11
[Thu Mar 29 22:50:13 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 22:50:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 22:50:13 2012] Assessing source extent using major
[Thu Mar 29 22:50:13 2012] Source does appear to be extended
[Thu Mar 29 22:50:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 01:20:17 2012] XMMSAS src. selection expression = ellipse(32535.737335, 11437.335953, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 01:20:17 2012] Writing source region out to fullrun_mos1_xmm0502271401_pi300-10000_pass1_cl_src8_src.reg
[Fri Mar 30 01:20:17 2012] Extracting stamp from image fullrun_mos1_xmm0502271401_pi300-10000_cl_sm2.00.img.gz, (337, 95) - (412, 170)
[Fri Mar 30 01:20:17 2012] XMMSAS bgd. selection expression = annulus(32535.737335, 11437.335953, 1087.500000, 2175.000000, X, Y) && !ellipse(33227.428223, 13887.431503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31105.578200, 9880.124000, 981.616028, 981.616028, 0.000000, X, Y)
[Fri Mar 30 01:20:17 2012] Writing fullrun_mos1_xmm0502271401_pi300-10000_pass1_cl_src8.gif
[Fri Mar 30 01:26:34 2012] Mean detx,y = (14439.39, -3044.98) 
[Fri Mar 30 01:26:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 01:26:52 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 01:26:52 2012] Setting source spectrum file to fullrun_mos1_xmm0502271401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Mar 30 01:26:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502271401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Mar 30 01:42:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 30 01:42:44 2012] rmf not generated due to insufficient counts
[Fri Mar 30 02:04:20 2012] Updating aperture counts using extracted products
[Fri Mar 30 02:04:20 2012] Error reading totcts from fullrun_mos1_xmm0502271401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Mar 30 02:04:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 02:04:21 2012] Using photon index=1.80, rate=0.0024, arf fullrun_mos1_xmm0502271401_pi300-10000_pass1_cl_src8.arf
[Fri Mar 30 02:04:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 02:04:21 2012] Updating source flux to 6.3e-14
[Fri Mar 30 02:04:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting