[Thu Mar 29 19:46:40 2012] Detection parameters:
  Position = (416.0, 202.9) = 7 20 1.78 71 15 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 705.1 +/- 36.8
  Background counts = 175.2
  Rate = 0.01 +/- 0.0005

[Thu Mar 29 19:46:40 2012] Off-axis axis estimate = 10.98'
[Thu Mar 29 20:26:47 2012] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 20:26:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 29 20:26:47 2012] Initial guess for spatial extent in simple fitting = 11.92"
[Thu Mar 29 20:26:47 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.857
[Thu Mar 29 20:26:47 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.92"
[Thu Mar 29 21:01:38 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_src3.ximg exists
[Thu Mar 29 21:01:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_src3.csv
[Thu Mar 29 21:01:38 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Mar 29 21:01:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_src3.csv
[Thu Mar 29 21:01:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 21:01:39 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Mar 29 21:01:39 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Mar 29 21:01:39 2012] Fit fullrun_mos1_xmm0502271401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Mar 29 21:30:39 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.635521 pixels away
[Thu Mar 29 21:30:39 2012] Source 4 is offset by 6.548789 and 4.451544 pixels which is larger than
2 X fitted extent = 1.364768 x 1.364768, not incorporating fit results
[Thu Mar 29 21:30:39 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 21:30:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 21:30:39 2012] Assessing source extent using major
[Thu Mar 29 21:30:39 2012] Source does appear to be extended
[Thu Mar 29 21:30:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 21:48:56 2012] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 21:48:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 29 21:48:56 2012] Initial guess for spatial extent in simple fitting = 11.92"
[Thu Mar 29 21:48:56 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.857
[Thu Mar 29 21:48:56 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.92"
[Thu Mar 29 22:17:09 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_src3.ximg exists
[Thu Mar 29 22:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_src3.csv
[Thu Mar 29 22:17:09 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Mar 29 22:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_src3.csv
[Thu Mar 29 22:17:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 22:17:09 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Mar 29 22:17:09 2012] fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Mar 29 22:17:09 2012] Fit fullrun_mos1_xmm0502271401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Mar 29 22:50:13 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.635521 pixels away
[Thu Mar 29 22:50:13 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 22:50:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 22:50:13 2012] Assessing source extent using major
[Thu Mar 29 22:50:13 2012] Source does appear to be extended
[Thu Mar 29 22:50:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 01:20:16 2012] XMMSAS src. selection expression = ellipse(36140.624603, 17601.164352, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 01:20:16 2012] Writing source region out to fullrun_mos1_xmm0502271401_pi300-10000_pass1_cl_src4_src.reg
[Fri Mar 30 01:20:16 2012] Extracting stamp from image fullrun_mos1_xmm0502271401_pi300-10000_cl_sm2.00.img.gz, (378, 165) - (453, 240)
[Fri Mar 30 01:20:16 2012] XMMSAS bgd. selection expression = annulus(36140.624603, 17601.164352, 1087.500000, 2175.000000, X, Y) && !ellipse(34675.428101, 16218.522003, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 01:20:16 2012] Writing fullrun_mos1_xmm0502271401_pi300-10000_pass1_cl_src4.gif
[Fri Mar 30 01:23:49 2012] Mean detx,y = (9719.57, -8395.53) 
[Fri Mar 30 01:23:52 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 01:24:18 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 01:24:18 2012] Setting source spectrum file to fullrun_mos1_xmm0502271401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 30 01:24:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502271401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Mar 30 01:37:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 30 01:37:31 2012] rmf not generated due to insufficient counts
[Fri Mar 30 02:04:20 2012] Updating aperture counts using extracted products
[Fri Mar 30 02:04:20 2012] Error reading totcts from fullrun_mos1_xmm0502271401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 30 02:04:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 02:04:21 2012] Using photon index=1.80, rate=0.00962, arf fullrun_mos1_xmm0502271401_pi300-10000_pass1_cl_src4.arf
[Fri Mar 30 02:04:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 02:04:21 2012] Updating source flux to 2.1e-13
[Fri Mar 30 02:04:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting