Analysis Type | Results | Plot | Products |
---|---|---|---|
Spatial |
Source position = 8 32 58.62 52 47 39.9 Source image position = (125.618492126, 311.445068359) Source region radius = 32.6" Background annulus = 54.4" - 108.7" |
N/A | |
Spectral |
Spectral fit not performed
Not generating rmf since RequireSpatial is true but spatial fitting not done rmf not generated due to insufficient counts Simple spatial fitting not done (or not done successfully), skipping spectral fitting |
N/A | srcpi bgdpi arf |
Temporal |
K-S test against local background: d = 0.0760036, prob = 0.0328962 K-S test against global background: d = 0.0681213, prob = 0.0260074 |
N/A | |
Counterparts | Check SIMBAD |
Notes:
Source spatial parameters and count rates are NOT based on spatial fitting, source region taken from detection output.
Regions give source ellipse (red) and bgd. annulus used in product extraction (green), other ellipse show nearby sources that have been excluded (blue, if any).N.B., nearby sources are NOT excluded from the source regions since in many cases that would also remove many source photons for the source of interest, and this case is more properly handled manually
Source variability probability gives the probability that the source light curve is consistent with the background light curve. "Local" background is taken from the annulus shown. "Global" background is the background light curve shown on the main report page.
This page was generated at Wed Oct 5 00:38:48 2011)