[Tue Oct  4 10:56:50 2011] Detection parameters:
  Position = (481.4, 369.2) = 8 30 7.83 52 51 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.8 +/- 22.3
  Background counts = 86.8
  Rate = 0.002 +/- 0.0003

[Tue Oct  4 10:56:52 2011] Off-axis axis estimate = 14.23'
[Tue Oct  4 11:02:48 2011] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 11:02:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 11:02:48 2011] Initial guess for spatial extent in simple fitting = 13.54"
[Tue Oct  4 11:02:48 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.938
[Tue Oct  4 11:02:48 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 13.54"
[Tue Oct  4 13:31:35 2011] fullrun_pn_xmm0502220301_pi300-10000_cl_pass0_src15.ximg exists
[Tue Oct  4 13:31:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502220301_pi300-10000_cl_pass0_src15.csv
[Tue Oct  4 13:31:35 2011] fullrun_pn_xmm0502220301_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Oct  4 13:31:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502220301_pi300-10000_cl_pass0_src15.csv
[Tue Oct  4 13:31:35 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502220301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502220301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 13:31:36 2011] fullrun_pn_xmm0502220301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Oct  4 13:31:36 2011] fullrun_pn_xmm0502220301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Oct  4 13:31:36 2011] Fit fullrun_pn_xmm0502220301_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Oct  4 15:06:07 2011] Spatial fit model total counts = 1728.450000, observed total counts = 1730.000000
[Tue Oct  4 15:06:07 2011] Offset between fit and detection position for source 15 = 7.583998 pixels
[Tue Oct  4 15:06:07 2011] 1660.802000 total counts/ 995.493000 bgd. counts: snr = 21.086490
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 7.583998 pixels
  Position = (478.0, 376.0) = 8 30 9.47 52 52 18.8
  Extent = 27.1 (27.0-54.2)", rotation angle = 0
  Source counts = 665.3 +/- 40.8
  Background counts = 995.5
  Rate = 0.01 +/- 0.0006
[Tue Oct  4 15:06:07 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 15:06:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 15:06:07 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 15:06:07 2011] Source does appear to be extended
[Tue Oct  4 15:06:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 15:06:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 15:06:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 15:06:35 2011] Initial guess for spatial extent in simple fitting = 27.08"
[Tue Oct  4 15:06:35 2011] source mask rpix=6.2, npix_max = 180, mask sum = 196, frac = 1.083
[Tue Oct  4 15:06:35 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 27.08"
[Tue Oct  4 17:11:22 2011] fullrun_pn_xmm0502220301_pi300-10000_cl_pass1_src13.ximg exists
[Tue Oct  4 17:11:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502220301_pi300-10000_cl_pass1_src13.csv
[Tue Oct  4 17:11:22 2011] fullrun_pn_xmm0502220301_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Oct  4 17:11:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502220301_pi300-10000_cl_pass1_src13.csv
[Tue Oct  4 17:11:22 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502220301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502220301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 17:11:23 2011] fullrun_pn_xmm0502220301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Oct  4 17:11:23 2011] fullrun_pn_xmm0502220301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Oct  4 17:11:23 2011] Fit fullrun_pn_xmm0502220301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Oct  4 18:44:57 2011] Warning, spatial fit 13 centroid is now closest to src. 24
[Tue Oct  4 18:44:57 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 18:44:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 18:44:57 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 18:44:57 2011] Source does appear to be extended
[Tue Oct  4 18:44:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 18:44:57 2011] Source is confused with source 24
[Tue Oct  4 18:45:24 2011] XMMSAS src. selection expression = ellipse(41536.860000, 32661.228000, 1624.968047, 1624.968047, 0.000000, X, Y)
[Tue Oct  4 18:45:24 2011] Writing source region out to fullrun_pn_xmm0502220301_pi300-10000_pass1_cl_src15_src.reg
[Tue Oct  4 18:45:24 2011] Extracting stamp from image fullrun_pn_xmm0502220301_pi300-10000_cl_sm2.00.img.gz, (385, 283) - (571, 469)
[Tue Oct  4 18:45:24 2011] XMMSAS bgd. selection expression = annulus(41536.860000, 32661.228000, 2708.280078, 5416.560156, X, Y) && !ellipse(36479.759460, 36473.894501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36274.823059, 31449.543610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37077.438800, 31190.849320, 365.298411, 365.298411, 0.000000, X, Y) && !ellipse(42084.568000, 31408.106000, 4317.808124, 4317.808124, 0.000000, X, Y) && !ellipse(40573.963500, 30160.834800, 526.845615, 526.845615, 0.000000, X, Y) && !ellipse(39659.377411, 27680.538361, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Oct  4 18:45:24 2011] Writing fullrun_pn_xmm0502220301_pi300-10000_pass1_cl_src15.gif
[Tue Oct  4 18:59:18 2011] Mean detx,y = (-16682.38, 7509.17) 
[Tue Oct  4 18:59:23 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Oct  4 19:00:12 2011] Binned source spectrum to 10 counts/bin
[Tue Oct  4 19:00:12 2011] Setting source spectrum file to fullrun_pn_xmm0502220301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Oct  4 19:00:12 2011] Setting bgd. spectrum file to fullrun_pn_xmm0502220301_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Oct  5 00:12:32 2011] Updating aperture counts using extracted products
[Wed Oct  5 00:12:32 2011] Error reading totcts from fullrun_pn_xmm0502220301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Oct  5 00:12:33 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 00:12:33 2011] Using photon index=1.80, rate=0.00965, arf fullrun_pn_xmm0502220301_pi300-10000_pass1_cl_src15.arf
[Wed Oct  5 00:12:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 00:12:33 2011] Updating source flux to 7.9e-14
[Wed Oct  5 00:15:49 2011] Flag c found in src. 15 procflags, skipping spectral fitting