[Tue Oct  4 10:57:45 2011] Detection parameters:
  Position = (394.5, 332.2) = 8 30 49.63 52 49 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 318.4 +/- 24.9
  Background counts = 83.2
  Rate = 0.007 +/- 0.0005

[Tue Oct  4 10:57:46 2011] Off-axis axis estimate = 7.38'
[Tue Oct  4 14:15:45 2011] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 14:15:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 14:15:45 2011] Initial guess for spatial extent in simple fitting = 10.12"
[Tue Oct  4 14:15:45 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.939
[Tue Oct  4 14:15:45 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 10.12"
[Tue Oct  4 15:05:53 2011] fullrun_mos2_xmm0502220301_pi300-10000_cl_pass0_src3.ximg exists
[Tue Oct  4 15:05:53 2011] fullrun_mos2_xmm0502220301_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Oct  4 15:05:53 2011] Fit fullrun_mos2_xmm0502220301_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue Oct  4 15:05:53 2011] fullrun_mos2_xmm0502220301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Oct  4 15:05:53 2011] fullrun_mos2_xmm0502220301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Oct  4 15:05:53 2011] Fit fullrun_mos2_xmm0502220301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Oct  4 15:06:19 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.376858 pixels away
[Tue Oct  4 15:06:19 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 15:06:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 15:06:19 2011] Assessing source extent using major
[Tue Oct  4 15:06:19 2011] Source does appear to be extended
[Tue Oct  4 15:06:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 17:58:06 2011] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 17:58:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 17:58:06 2011] Initial guess for spatial extent in simple fitting = 10.12"
[Tue Oct  4 17:58:06 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.939
[Tue Oct  4 17:58:06 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 10.12"
[Tue Oct  4 18:44:41 2011] fullrun_mos2_xmm0502220301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Oct  4 18:44:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502220301_pi300-10000_cl_pass1_src3.csv
[Tue Oct  4 18:44:41 2011] fullrun_mos2_xmm0502220301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Oct  4 18:44:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502220301_pi300-10000_cl_pass1_src3.csv
[Tue Oct  4 18:44:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502220301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502220301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 18:44:42 2011] fullrun_mos2_xmm0502220301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Oct  4 18:44:42 2011] fullrun_mos2_xmm0502220301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Oct  4 18:44:42 2011] Fit fullrun_mos2_xmm0502220301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Oct  4 18:45:09 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.376858 pixels away
[Tue Oct  4 18:45:09 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 18:45:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 18:45:09 2011] Assessing source extent using major
[Tue Oct  4 18:45:09 2011] Source does appear to be extended
[Tue Oct  4 18:45:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 23:07:53 2011] XMMSAS src. selection expression = ellipse(34275.554138, 28853.931213, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Oct  4 23:07:53 2011] Writing source region out to fullrun_mos2_xmm0502220301_pi300-10000_pass1_cl_src13_src.reg
[Tue Oct  4 23:07:53 2011] Extracting stamp from image fullrun_mos2_xmm0502220301_pi300-10000_cl_sm2.00.img.gz, (357, 295) - (432, 370)
[Tue Oct  4 23:07:53 2011] XMMSAS bgd. selection expression = annulus(34275.554138, 28853.931213, 1087.500000, 2175.000000, X, Y) && !ellipse(33602.002411, 26540.399750, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Oct  4 23:07:53 2011] Writing fullrun_mos2_xmm0502220301_pi300-10000_pass1_cl_src13.gif
[Tue Oct  4 23:08:32 2011] Mean detx,y = (9619.09, -4363.33) 
[Tue Oct  4 23:08:33 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Oct  4 23:08:42 2011] Binned source spectrum to 10 counts/bin
[Tue Oct  4 23:08:42 2011] Setting source spectrum file to fullrun_mos2_xmm0502220301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Oct  4 23:08:42 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502220301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Oct  4 23:27:54 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Oct  4 23:27:54 2011] rmf not generated due to insufficient counts
[Wed Oct  5 00:12:36 2011] Updating aperture counts using extracted products
[Wed Oct  5 00:12:36 2011] Error reading totcts from fullrun_mos2_xmm0502220301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Oct  5 00:12:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 00:12:37 2011] Using photon index=1.80, rate=0.007, arf fullrun_mos2_xmm0502220301_pi300-10000_pass1_cl_src13.arf
[Wed Oct  5 00:12:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 00:12:37 2011] Updating source flux to 1.4e-13
[Wed Oct  5 00:14:08 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting