[Tue Oct  4 10:57:18 2011] Detection parameters:
  Position = (220.6, 156.8) = 8 32 12.89 52 36 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.3 +/- 17.3
  Background counts = 101.4
  Rate = 0.001 +/- 0.0002

[Tue Oct  4 10:57:18 2011] Off-axis axis estimate = 11.71'
[Tue Oct  4 13:31:37 2011] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 13:31:37 2011] Initial guess for spatial extent in simple fitting = 12.29"
[Tue Oct  4 13:31:37 2011] source mask rpix=2.8, npix_max = 44, mask sum = 41, frac = 0.928
[Tue Oct  4 13:31:37 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 12.29"
[Tue Oct  4 14:15:44 2011] fullrun_mos1_xmm0502220301_pi300-10000_cl_pass0_src33.ximg exists
[Tue Oct  4 14:15:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502220301_pi300-10000_cl_pass0_src33.csv
[Tue Oct  4 14:15:44 2011] fullrun_mos1_xmm0502220301_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Oct  4 14:15:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502220301_pi300-10000_cl_pass0_src33.csv
[Tue Oct  4 14:15:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502220301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502220301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 14:15:45 2011] fullrun_mos1_xmm0502220301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Oct  4 14:15:45 2011] fullrun_mos1_xmm0502220301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Oct  4 14:15:45 2011] Fit fullrun_mos1_xmm0502220301_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Oct  4 15:06:12 2011] Source 29 is offset by 1.011179 and -8.143623 pixels which is larger than
2 X fitted extent = 1.390308 x 1.390308, not incorporating fit results
[Tue Oct  4 15:06:12 2011] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 12.847107 pixels away
[Tue Oct  4 15:06:12 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 15:06:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 15:06:12 2011] Assessing source extent using major
[Tue Oct  4 15:06:12 2011] Source does appear to be extended
[Tue Oct  4 15:06:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 17:11:24 2011] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 17:11:24 2011] Initial guess for spatial extent in simple fitting = 12.29"
[Tue Oct  4 17:11:24 2011] source mask rpix=2.8, npix_max = 44, mask sum = 41, frac = 0.928
[Tue Oct  4 17:11:24 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 12.29"
[Tue Oct  4 17:58:06 2011] fullrun_mos1_xmm0502220301_pi300-10000_cl_pass1_src33.ximg exists
[Tue Oct  4 17:58:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502220301_pi300-10000_cl_pass1_src33.csv
[Tue Oct  4 17:58:06 2011] fullrun_mos1_xmm0502220301_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue Oct  4 17:58:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502220301_pi300-10000_cl_pass1_src33.csv
[Tue Oct  4 17:58:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502220301_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502220301_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 17:58:06 2011] fullrun_mos1_xmm0502220301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue Oct  4 17:58:06 2011] fullrun_mos1_xmm0502220301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Oct  4 17:58:06 2011] Fit fullrun_mos1_xmm0502220301_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue Oct  4 18:45:02 2011] Spatial fit model total counts = 284.196000, observed total counts = 283.000000
[Tue Oct  4 18:45:02 2011] Offset between fit and detection position for source 29 = 0.740937 pixels
[Tue Oct  4 18:45:02 2011] 295.129600 total counts/ 227.425000 bgd. counts: snr = 4.489511
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.740937 pixels
  Position = (220.1, 157.4) = 8 32 13.14 52 36 29.5
  Extent = 6.7 (5.2-9.5)", rotation angle = 0
  Source counts = 67.7 +/- 17.2
  Background counts = 227.4
  Rate = 0.0009 +/- 0.0002
[Tue Oct  4 18:45:02 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 18:45:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 18:45:02 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 18:45:02 2011] Source does appear to be extended
[Tue Oct  4 18:45:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 22:13:00 2011] XMMSAS src. selection expression = ellipse(19101.403400, 13642.155120, 401.121612, 401.121612, 0.000000, X, Y)
[Tue Oct  4 22:13:00 2011] Writing source region out to fullrun_mos1_xmm0502220301_pi300-10000_pass1_cl_src29_src.reg
[Tue Oct  4 22:13:00 2011] Extracting stamp from image fullrun_mos1_xmm0502220301_pi300-10000_cl_sm2.00.img.gz, (197, 134) - (243, 180)
[Tue Oct  4 22:13:00 2011] XMMSAS bgd. selection expression = annulus(19101.403400, 13642.155120, 668.536019, 1337.072038, X, Y) && !ellipse(18145.815735, 14753.098495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17398.009476, 15589.390244, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Oct  4 22:13:00 2011] Writing fullrun_mos1_xmm0502220301_pi300-10000_pass1_cl_src29.gif
[Tue Oct  4 22:27:45 2011] Mean detx,y = (10647.87, 5790.97) 
[Tue Oct  4 22:27:46 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Oct  4 22:27:59 2011] Binned source spectrum to 10 counts/bin
[Tue Oct  4 22:28:00 2011] Setting source spectrum file to fullrun_mos1_xmm0502220301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Oct  4 22:28:00 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502220301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Oct  4 23:07:47 2011] Not generating rmf since there are only 67 counts
[Tue Oct  4 23:07:47 2011] rmf not generated due to insufficient counts
[Wed Oct  5 00:12:35 2011] Updating aperture counts using extracted products
[Wed Oct  5 00:12:35 2011] Error reading totcts from fullrun_mos1_xmm0502220301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Oct  5 00:12:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 00:12:36 2011] Using photon index=1.80, rate=0.000871, arf fullrun_mos1_xmm0502220301_pi300-10000_pass1_cl_src29.arf
[Wed Oct  5 00:12:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 00:12:36 2011] Updating source flux to 1.7e-14
[Wed Oct  5 00:12:39 2011] Flag b found in src. 29 procflags, skipping spectral fitting
[Wed Oct  5 00:12:39 2011] Source 29 has fewer than 100.000000 counts, skipping spectral fitting