[Mon Oct 31 20:36:12 2011] Detection parameters:
  Position = (466.3, 217.3) = 8 30 21.88 52 41 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.9 +/- 24.1
  Background counts = 167.0
  Rate = 0.002 +/- 0.0003

[Mon Oct 31 20:36:14 2011] Off-axis axis estimate = 13.52'
[Mon Oct 31 20:41:06 2011] Using EEF radius (= 13.19 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 20:41:06 2011] Initial guess for spatial extent in simple fitting = 13.19"
[Mon Oct 31 20:41:06 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.982
[Mon Oct 31 20:41:06 2011] Giving source the simple spatial ID 34 for pass 0, mean size = 13.19"
[Mon Oct 31 22:13:48 2011] fullrun_pn_xmm0502220201_pi300-10000_cl_pass0_src34.ximg exists
[Mon Oct 31 22:13:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502220201_pi300-10000_cl_pass0_src34.csv
[Mon Oct 31 22:13:48 2011] fullrun_pn_xmm0502220201_pi300-10000_cl_pass0_src34_1.ximg exists
[Mon Oct 31 22:13:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502220201_pi300-10000_cl_pass0_src34.csv
[Mon Oct 31 22:13:48 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502220201_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502220201_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 22:13:48 2011] fullrun_pn_xmm0502220201_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Mon Oct 31 22:13:48 2011] fullrun_pn_xmm0502220201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Mon Oct 31 22:13:48 2011] Fit fullrun_pn_xmm0502220201_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Mon Oct 31 23:51:46 2011] Source 35 is offset by -2.407608 and 3.039703 pixels which is larger than
2 X fitted extent = 1.467439 x 1.467439, not incorporating fit results
[Mon Oct 31 23:51:46 2011] Spatial fit model total counts = 1607.680000, observed total counts = 1657.000000
[Mon Oct 31 23:51:46 2011] Offset between fit and detection position for source 35 = 8.995125 pixels
[Mon Oct 31 23:51:46 2011] 1699.701100 total counts/ 35.081100 bgd. counts: snr = 281.046711
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 8.995125 pixels
  Position = (471.0, 209.6) = 8 30 19.65 52 40 30.3
  Extent = 26.4 (26.1-52.8)", rotation angle = 0
  Source counts = 1664.6 +/- 41.2
  Background counts = 35.1
  Rate = 0.03 +/- 0.0006
[Mon Oct 31 23:51:46 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 23:51:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 23:51:46 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 23:51:46 2011] Source does appear to be extended
[Mon Oct 31 23:51:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 23:52:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 23:52:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 23:52:09 2011] Initial guess for spatial extent in simple fitting = 26.38"
[Mon Oct 31 23:52:09 2011] source mask rpix=6.1, npix_max = 172, mask sum = 152, frac = 0.882
[Mon Oct 31 23:52:09 2011] Giving source the simple spatial ID 34 for pass 1, mean size = 26.38"
[Tue Nov  1 01:29:24 2011] fullrun_pn_xmm0502220201_pi300-10000_cl_pass1_src34.ximg exists
[Tue Nov  1 01:29:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502220201_pi300-10000_cl_pass1_src34.csv
[Tue Nov  1 01:29:24 2011] fullrun_pn_xmm0502220201_pi300-10000_cl_pass1_src34_1.ximg exists
[Tue Nov  1 01:29:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502220201_pi300-10000_cl_pass1_src34.csv
[Tue Nov  1 01:29:24 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502220201_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502220201_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 01:29:25 2011] fullrun_pn_xmm0502220201_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Tue Nov  1 01:29:25 2011] fullrun_pn_xmm0502220201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Tue Nov  1 01:29:25 2011] Fit fullrun_pn_xmm0502220201_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Tue Nov  1 02:54:23 2011] Warning, spatial fit 34 centroid is now closest to src. 12
[Tue Nov  1 02:54:23 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 02:54:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 02:54:23 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 02:54:23 2011] Source does appear to be extended
[Tue Nov  1 02:54:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 02:54:46 2011] Counts = 1664.620000, rescaling region sizes by 2.000000
[Tue Nov  1 02:54:46 2011] XMMSAS src. selection expression = ellipse(40931.746000, 18189.652000, 3165.168091, 3165.168091, 0.000000, X, Y)
[Tue Nov  1 02:54:46 2011] Writing source region out to fullrun_pn_xmm0502220201_pi300-10000_pass1_cl_src35_src.reg
[Tue Nov  1 02:54:46 2011] Extracting stamp from image fullrun_pn_xmm0502220201_pi300-10000_cl_sm2.00.img.gz, (289, 28) - (595, 392)
[Tue Nov  1 02:54:46 2011] XMMSAS bgd. selection expression = annulus(40931.746000, 18189.652000, 10550.560304, 21101.120607, X, Y) && !ellipse(26036.076660, 23923.255800, 461.003213, 461.003213, 0.000000, X, Y) && !ellipse(26037.505341, 34647.555603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25158.199463, 31716.132446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35481.364899, 28593.337433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20951.273600, 28637.385600, 366.659211, 366.659211, 0.000000, X, Y) && !ellipse(39665.003418, 24833.523895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21700.074620, 22282.451000, 568.534416, 568.534416, 0.000000, X, Y) && !ellipse(39823.484000, 19601.662000, 1032.576030, 1032.576030, 0.000000, X, Y) && !ellipse(32071.601044, 15959.312820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19378.383881, 14482.890854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37673.465942, 36231.317749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38289.509735, 30858.563293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42807.490000, 31173.382000, 2221.881430, 2221.881430, 0.000000, X, Y) && !ellipse(20784.560000, 19179.759400, 442.619006, 442.619006, 0.000000, X, Y) && !ellipse(30348.658000, 19007.553000, 364.659210, 364.659210, 0.000000, X, Y) && !ellipse(25046.206000, 14066.416800, 414.424012, 414.424012, 0.000000, X, Y) && !ellipse(24703.280600, 37034.284200, 579.709617, 319.013609, 356.571801, X, Y) && !ellipse(22339.577881, 37881.216675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30492.960449, 34396.257080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30429.457000, 28314.330400, 402.485612, 402.485612, 0.000000, X, Y) && !ellipse(20049.708128, 27746.252800, 464.068013, 464.068013, 0.000000, X, Y) && !ellipse(40890.238373, 27397.262665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26502.354200, 20093.311800, 362.009610, 362.009610, 0.000000, X, Y) && !ellipse(20626.518463, 17940.469131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24294.516200, 39732.728800, 609.014418, 609.014418, 0.000000, X, Y) && !ellipse(33007.079376, 30207.064240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26830.525421, 39812.277893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33068.271200, 12216.131120, 417.174412, 417.174412, 0.000000, X, Y) && !ellipse(23373.320600, 30540.543800, 502.042414, 502.042414, 0.000000, X, Y) && !ellipse(21797.950577, 30570.649261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24271.253600, 27872.465800, 468.980813, 468.980813, 0.000000, X, Y) && !ellipse(20596.636108, 27792.346954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34821.866780, 27429.489200, 582.112817, 290.764008, 90.000000, X, Y) && !ellipse(27335.379242, 26443.116821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22267.336800, 26289.921800, 416.236812, 416.236812, 0.000000, X, Y) && !ellipse(21274.255341, 25626.716553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24994.729600, 25407.275400, 793.889623, 793.889623, 0.000000, X, Y) && !ellipse(20248.158800, 25062.699000, 2109.416061, 700.080020, 57.931200, X, Y) && !ellipse(24303.491320, 24562.030600, 475.620014, 475.620014, 0.000000, X, Y) && !ellipse(34448.876400, 24240.352200, 1171.272034, 1171.272034, 0.000000, X, Y) && !ellipse(20259.548279, 13417.489990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26389.741600, 21893.365800, 342.917610, 342.917610, 0.000000, X, Y) && !ellipse(33161.973000, 21693.269600, 672.031474, 672.031474, 0.000000, X, Y) && !ellipse(28939.803020, 20535.163800, 319.820009, 319.820009, 0.000000, X, Y) && !ellipse(32590.971360, 18172.898600, 577.368966, 577.368966, 0.000000, X, Y) && !ellipse(31745.228912, 14405.778183, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov  1 02:54:46 2011] Writing fullrun_pn_xmm0502220201_pi300-10000_pass1_cl_src35.gif
[Tue Nov  1 03:33:14 2011] Mean detx,y = (-8466.15, -13451.05) 
[Tue Nov  1 03:33:27 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov  1 03:39:43 2011] Binned source spectrum to 10 counts/bin
[Tue Nov  1 03:39:44 2011] Setting source spectrum file to fullrun_pn_xmm0502220201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Nov  1 03:39:44 2011] Setting bgd. spectrum file to fullrun_pn_xmm0502220201_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Tue Nov  1 06:29:13 2011] Updating aperture counts using extracted products
[Tue Nov  1 06:29:13 2011] Error reading totcts from fullrun_pn_xmm0502220201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Nov  1 06:29:13 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 06:29:13 2011] Using photon index=1.80, rate=0.0261, arf fullrun_pn_xmm0502220201_pi300-10000_pass1_cl_src35.arf
[Tue Nov  1 06:29:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov  1 06:29:14 2011] Updating source flux to 1.7e-13
[Tue Nov  1 06:31:38 2011] Flag b found in src. 35 procflags, skipping spectral fitting