[Mon Oct 31 20:36:15 2011] Detection parameters:
  Position = (492.1, 280.8) = 8 30 9.39 52 45 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.7 +/- 14.1
  Background counts = 49.7
  Rate = 0.0008 +/- 0.0002

[Mon Oct 31 20:36:16 2011] Off-axis axis estimate = 14.10'
[Mon Oct 31 22:13:49 2011] Using EEF radius (= 13.48 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:13:49 2011] Initial guess for spatial extent in simple fitting = 13.48"
[Mon Oct 31 22:13:49 2011] source mask rpix=3.1, npix_max = 51, mask sum = 46, frac = 0.888
[Mon Oct 31 22:13:49 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 13.48"
[Mon Oct 31 23:07:31 2011] fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_src28.ximg exists
[Mon Oct 31 23:07:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_src28.csv
[Mon Oct 31 23:07:31 2011] fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon Oct 31 23:07:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_src28.csv
[Mon Oct 31 23:07:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 23:07:31 2011] fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon Oct 31 23:07:31 2011] fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Oct 31 23:07:31 2011] Fit fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Mon Oct 31 23:51:51 2011] Spatial fit model total counts = 448.793000, observed total counts = 452.000000
[Mon Oct 31 23:51:51 2011] Offset between fit and detection position for source 22 = 2.413711 pixels
[Mon Oct 31 23:51:51 2011] Warning, changing simple spatial fit ID from 28 to 25
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 2.413711 pixels
  Position = (490.2, 279.3) = 8 30 10.33 52 45 33.0
  Extent = 23.9 (21.1-26.6)", rotation angle = 0
  Source counts = 389.2 +/- 19.7
  Background counts = 0.0
  Rate = 0.005 +/- 0.0003
 Deleting source due to low signal-to-noise ratio