[Mon Oct 31 20:36:15 2011] Detection parameters:
  Position = (284.3, 426.6) = 8 31 49.02 52 56 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.8 +/- 15.4
  Background counts = 84.2
  Rate = 0.001 +/- 0.0002

[Mon Oct 31 20:36:16 2011] Off-axis axis estimate = 9.35'
[Mon Oct 31 22:13:49 2011] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 22:13:49 2011] Initial guess for spatial extent in simple fitting = 11.10"
[Mon Oct 31 22:13:49 2011] source mask rpix=2.6, npix_max = 37, mask sum = 23, frac = 0.617
[Mon Oct 31 22:13:49 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 11.10"
[Mon Oct 31 23:07:31 2011] fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_src21.ximg exists
[Mon Oct 31 23:07:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_src21.csv
[Mon Oct 31 23:07:31 2011] fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Oct 31 23:07:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_src21.csv
[Mon Oct 31 23:07:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 23:07:31 2011] fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Oct 31 23:07:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon Oct 31 23:07:31 2011] fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Oct 31 23:07:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon Oct 31 23:07:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502220201_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 23:51:51 2011] Spatial fit model total counts = 280.918000, observed total counts = 312.000000
[Mon Oct 31 23:51:51 2011] Offset between fit and detection position for source 10 = 0.427025 pixels
[Mon Oct 31 23:51:51 2011] 320.427600 total counts/ 243.980000 bgd. counts: snr = 4.894257
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.427025 pixels
  Position = (284.6, 426.3) = 8 31 48.84 52 56 14.8
  Extent = 4.7 (3.9-5.7)", rotation angle = 0
  Source counts = 76.4 +/- 17.9
  Background counts = 244.0
  Rate = 0.001 +/- 0.0002
[Mon Oct 31 23:51:51 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 23:51:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 23:51:51 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 23:51:51 2011] Source does appear to be extended
[Mon Oct 31 23:51:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 01:29:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 01:29:25 2011] Initial guess for spatial extent in simple fitting = 4.71"
[Tue Nov  1 01:29:25 2011] source mask rpix=1.1, npix_max = 10, mask sum = 7, frac = 0.698
[Tue Nov  1 01:29:25 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 4.71"
[Tue Nov  1 02:07:27 2011] fullrun_mos1_xmm0502220201_pi300-10000_cl_pass1_src21.ximg exists
[Tue Nov  1 02:07:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502220201_pi300-10000_cl_pass1_src21.csv
[Tue Nov  1 02:07:27 2011] fullrun_mos1_xmm0502220201_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue Nov  1 02:07:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502220201_pi300-10000_cl_pass1_src21.csv
[Tue Nov  1 02:07:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502220201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502220201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 02:07:27 2011] fullrun_mos1_xmm0502220201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue Nov  1 02:07:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502220201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Tue Nov  1 02:07:27 2011] fullrun_mos1_xmm0502220201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Nov  1 02:07:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502220201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Tue Nov  1 02:07:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502220201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502220201_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 02:54:27 2011] Spatial fit model total counts = 278.176000, observed total counts = 312.000000
[Tue Nov  1 02:54:27 2011] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Nov  1 02:54:28 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 02:54:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 02:54:28 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 02:54:28 2011] Source does appear to be extended
[Tue Nov  1 02:54:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 05:14:32 2011] XMMSAS src. selection expression = ellipse(24714.527200, 37042.956000, 282.787561, 282.787561, 0.000000, X, Y)
[Tue Nov  1 05:14:32 2011] Writing source region out to fullrun_mos1_xmm0502220201_pi300-10000_pass1_cl_src10_src.reg
[Tue Nov  1 05:14:32 2011] Extracting stamp from image fullrun_mos1_xmm0502220201_pi300-10000_cl_sm2.00.img.gz, (268, 410) - (301, 443)
[Tue Nov  1 05:14:32 2011] XMMSAS bgd. selection expression = annulus(24714.527200, 37042.956000, 471.312601, 942.625202, X, Y)
[Tue Nov  1 05:14:32 2011] Writing fullrun_mos1_xmm0502220201_pi300-10000_pass1_cl_src10.gif
[Tue Nov  1 05:19:29 2011] Mean detx,y = (-11042.56, -7066.48) 
[Tue Nov  1 05:19:29 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov  1 05:19:36 2011] Binned source spectrum to 10 counts/bin
[Tue Nov  1 05:19:36 2011] Setting source spectrum file to fullrun_mos1_xmm0502220201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Nov  1 05:19:36 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502220201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Nov  1 05:48:26 2011] Not generating rmf since there are only 76 counts
[Tue Nov  1 05:48:26 2011] rmf not generated due to insufficient counts
[Tue Nov  1 06:29:14 2011] Updating aperture counts using extracted products
[Tue Nov  1 06:29:14 2011] Error reading totcts from fullrun_mos1_xmm0502220201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Nov  1 06:29:14 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 06:29:14 2011] Using photon index=1.80, rate=0.00103, arf fullrun_mos1_xmm0502220201_pi300-10000_pass1_cl_src10.arf
[Tue Nov  1 06:29:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Nov  1 06:29:14 2011] Updating source flux to 3.5e-14
[Tue Nov  1 06:29:16 2011] Flag p found in src. 10 procflags, skipping spectral fitting
[Tue Nov  1 06:29:16 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting