[Tue Feb 14 10:13:44 2012] Detection parameters:
  Position = (168.6, 423.3) = 12 22 15.64 28 21 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.2 +/- 12.0
  Background counts = 17.8
  Rate = 0.004 +/- 0.0007

[Tue Feb 14 10:13:44 2012] Off-axis axis estimate = 13.06'
[Tue Feb 14 10:35:33 2012] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 10:35:33 2012] Initial guess for spatial extent in simple fitting = 12.96"
[Tue Feb 14 10:35:33 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.012
[Tue Feb 14 10:35:33 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.96"
[Tue Feb 14 10:55:37 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_src6.ximg exists
[Tue Feb 14 10:55:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_src6.csv
[Tue Feb 14 10:55:37 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Feb 14 10:55:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_src6.csv
[Tue Feb 14 10:55:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 10:55:37 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Feb 14 10:55:37 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Feb 14 10:55:37 2012] Fit fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Feb 14 10:55:44 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.811077 pixels away
[Tue Feb 14 10:55:44 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 10:55:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 10:55:44 2012] Assessing source extent using major
[Tue Feb 14 10:55:44 2012] Source does appear to be extended
[Tue Feb 14 10:55:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 11:04:58 2012] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 11:04:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 14 11:04:58 2012] Initial guess for spatial extent in simple fitting = 12.96"
[Tue Feb 14 11:04:58 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.012
[Tue Feb 14 11:04:58 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.96"
[Tue Feb 14 11:23:16 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_src5.ximg exists
[Tue Feb 14 11:23:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_src5.csv
[Tue Feb 14 11:23:16 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Feb 14 11:23:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_src5.csv
[Tue Feb 14 11:23:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 11:23:16 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Feb 14 11:23:16 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Feb 14 11:23:16 2012] Fit fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Feb 14 11:23:22 2012] Spatial fit model total counts = 129.996000, observed total counts = 130.000000
[Tue Feb 14 11:23:22 2012] Offset between fit and detection position for source 2 = 0.539490 pixels
[Tue Feb 14 11:23:22 2012] 130.531400 total counts/ 77.481400 bgd. counts: snr = 6.026798
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.539490 pixels
  Position = (168.4, 423.8) = 12 22 15.70 28 21 23.4
  Extent = 7.8 (5.7-10.6)", rotation angle = 0
  Source counts = 53.0 +/- 11.4
  Background counts = 77.5
  Rate = 0.004 +/- 0.0008
[Tue Feb 14 11:23:22 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 11:23:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 11:23:22 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 11:23:22 2012] Source does appear to be extended
[Tue Feb 14 11:23:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 11:53:36 2012] XMMSAS src. selection expression = ellipse(14606.079600, 36822.152900, 469.203014, 469.203014, 0.000000, X, Y)
[Tue Feb 14 11:53:36 2012] Writing source region out to fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src2_src.reg
[Tue Feb 14 11:53:36 2012] Extracting stamp from image fullrun_mos2_xmm0502211401_pi300-10000_cl_sm2.00.img.gz, (141, 397) - (195, 451)
[Tue Feb 14 11:53:36 2012] XMMSAS bgd. selection expression = annulus(14606.079600, 36822.152900, 782.005023, 1564.010045, X, Y)
[Tue Feb 14 11:53:36 2012] Writing fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src2.gif
[Tue Feb 14 11:56:32 2012] Mean detx,y = (6792.82, 13055.66) 
[Tue Feb 14 11:56:33 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 11:56:41 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 11:56:41 2012] Setting source spectrum file to fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Feb 14 11:56:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Feb 14 12:04:59 2012] Not generating rmf since there are only 53 counts
[Tue Feb 14 12:04:59 2012] rmf not generated due to insufficient counts
[Tue Feb 14 12:07:45 2012] Updating aperture counts using extracted products
[Tue Feb 14 12:07:45 2012] Error reading totcts from fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Feb 14 12:07:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 12:07:46 2012] Using photon index=1.80, rate=0.00391, arf fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src2.arf
[Tue Feb 14 12:07:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 12:07:46 2012] Updating source flux to 1.3e-13
[Tue Feb 14 12:07:56 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting