[Tue Feb 14 10:13:44 2012] Detection parameters:
  Position = (301.7, 321.1) = 12 21 31.77 28 13 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 18204.1 +/- 159.9
  Background counts = 27.8
  Rate = 1 +/- 0.01

[Tue Feb 14 10:13:44 2012] Off-axis axis estimate = 1.66'
[Tue Feb 14 10:35:33 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 10:35:33 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Tue Feb 14 10:35:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Tue Feb 14 10:35:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Tue Feb 14 10:55:36 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_src1.ximg exists
[Tue Feb 14 10:55:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 10:55:36 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Feb 14 10:55:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_src1.csv
[Tue Feb 14 10:55:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 10:55:37 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 14 10:55:37 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 14 10:55:37 2012] Fit fullrun_mos2_xmm0502211401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 14 10:55:44 2012] Spatial fit model total counts = 13420.000000, observed total counts = 13420.000000
[Tue Feb 14 10:55:44 2012] Offset between fit and detection position for source 1 = 0.168340 pixels
[Tue Feb 14 10:55:44 2012] 13359.970000 total counts/ 2548.770000 bgd. counts: snr = 214.145315
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.168340 pixels
  Position = (301.6, 321.1) = 12 21 31.83 28 13 57.2
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 10811.2 +/- 115.6
  Background counts = 2548.8
  Rate = 0.8 +/- 0.009
[Tue Feb 14 10:55:44 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 10:55:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 10:55:44 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 10:55:44 2012] Source does appear to be extended
[Tue Feb 14 10:55:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 11:04:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 11:04:58 2012] Initial guess for spatial extent in simple fitting = 5.42"
[Tue Feb 14 11:04:58 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.985
[Tue Feb 14 11:04:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.42"
[Tue Feb 14 11:23:16 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 14 11:23:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 11:23:16 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 14 11:23:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_src1.csv
[Tue Feb 14 11:23:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 11:23:16 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 14 11:23:16 2012] fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 14 11:23:16 2012] Fit fullrun_mos2_xmm0502211401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 14 11:23:22 2012] Spatial fit model total counts = 13402.000000, observed total counts = 13402.000000
[Tue Feb 14 11:23:22 2012] Offset between fit and detection position for source 1 = 0.013967 pixels
[Tue Feb 14 11:23:22 2012] 13397.740000 total counts/ 2622.940000 bgd. counts: snr = 210.385129
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.013967 pixels
  Position = (301.6, 321.1) = 12 21 31.83 28 13 57.2
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 10774.8 +/- 115.7
  Background counts = 2622.9
  Rate = 0.8 +/- 0.009
[Tue Feb 14 11:23:22 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 11:23:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 11:23:22 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 11:23:22 2012] Source does appear to be extended
[Tue Feb 14 11:23:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 11:53:35 2012] Counts = 10774.800000, rescaling region sizes by 3.000000
[Tue Feb 14 11:53:35 2012] XMMSAS src. selection expression = ellipse(26187.843800, 27888.810200, 970.156828, 970.156828, 0.000000, X, Y)
[Tue Feb 14 11:53:35 2012] Writing source region out to fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src1_src.reg
[Tue Feb 14 11:53:35 2012] Extracting stamp from image fullrun_mos2_xmm0502211401_pi300-10000_cl_sm2.00.img.gz, (246, 265) - (357, 377)
[Tue Feb 14 11:53:36 2012] XMMSAS bgd. selection expression = annulus(26187.843800, 27888.810200, 4850.784140, 9701.568279, X, Y) && !ellipse(25169.983440, 18599.000800, 401.197612, 401.197612, 0.000000, X, Y) && !ellipse(27436.846497, 27658.506927, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 14 11:53:36 2012] Writing fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src1.gif
[Tue Feb 14 11:53:39 2012] Mean detx,y = (117.39, 38.62) 
[Tue Feb 14 11:53:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 11:56:01 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 11:56:01 2012] Setting source spectrum file to fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 14 11:56:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Feb 14 12:07:45 2012] Updating aperture counts using extracted products
[Tue Feb 14 12:07:45 2012] Error reading totcts from fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 14 12:07:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 12:07:45 2012] Using photon index=1.80, rate=0.794, arf fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src1.arf
[Tue Feb 14 12:07:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 12:07:45 2012] Updating source flux to 8.3e-12
[Tue Feb 14 12:08:12 2012] Reading fit data from xmm0502211401/analysis//spectral/fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Feb 14 12:08:12 2012] Spectral fit parameter nH value = 2.73066e+20
[Tue Feb 14 12:08:12 2012] Spectral fit parameter PhoIndex value = 2.86854
[Tue Feb 14 12:08:12 2012] Failed to get F(0.3-8.0) from xmm0502211401/analysis//spectral/fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Feb 14 12:08:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 12:08:12 2012] Using Nh = 2.7e+20, photon index=2.87, rate=0.794, arf fullrun_mos2_xmm0502211401_pi300-10000_pass1_cl_src1.arf
[Tue Feb 14 12:08:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 12:08:12 2012] Updating source flux to 6.3e-12