[Wed Jun 13 06:24:07 2012] Detection parameters:
  Position = (323.3, 279.3) = 12 21 24.55 28 10 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.1 +/- 18.7
  Background counts = 117.0
  Rate = 0.008 +/- 0.001

[Wed Jun 13 06:24:07 2012] Off-axis axis estimate = 2.28'
[Wed Jun 13 06:29:48 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 06:29:48 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Wed Jun 13 06:29:48 2012] source mask rpix=1.7, npix_max = 20, mask sum = 24, frac = 1.196
[Wed Jun 13 06:29:48 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.57"
[Wed Jun 13 06:44:56 2012] fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jun 13 06:44:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_src7.csv
[Wed Jun 13 06:44:56 2012] fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jun 13 06:44:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_src7.csv
[Wed Jun 13 06:44:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 06:44:56 2012] fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jun 13 06:44:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Jun 13 06:44:56 2012] fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jun 13 06:44:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Jun 13 06:44:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:33:45 2012] Spatial fit model total counts = 1482.510000, observed total counts = 1150.000000
[Wed Jun 13 07:33:45 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 07:33:45 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:33:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:33:45 2012] Assessing source extent using major
[Wed Jun 13 07:33:45 2012] Source does appear to be extended
[Wed Jun 13 07:33:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 07:33:45 2012] Deleting source due to low Poisson probability 0.9