[Wed Jun 13 06:24:07 2012] Detection parameters:
  Position = (320.5, 335.8) = 12 21 25.49 28 15 0.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.7 +/- 21.4
  Background counts = 116.9
  Rate = 0.006 +/- 0.001

[Wed Jun 13 06:24:07 2012] Off-axis axis estimate = 3.14'
[Wed Jun 13 06:29:48 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 06:29:48 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Wed Jun 13 06:29:48 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.142
[Wed Jun 13 06:29:48 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.00"
[Wed Jun 13 06:44:56 2012] fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_src6.ximg exists
[Wed Jun 13 06:44:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_src6.csv
[Wed Jun 13 06:44:56 2012] fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Jun 13 06:44:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_src6.csv
[Wed Jun 13 06:44:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 06:44:56 2012] fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Jun 13 06:44:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Jun 13 06:44:56 2012] fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Jun 13 06:44:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Jun 13 06:44:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:33:45 2012] Spatial fit model total counts = 1633.750000, observed total counts = 996.000000
[Wed Jun 13 07:33:45 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 07:33:45 2012] Warning, spatial fit 6 centroid is now closest to src. 5
[Wed Jun 13 07:33:45 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:33:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:33:45 2012] Assessing source extent using major
[Wed Jun 13 07:33:45 2012] Source does appear to be extended
[Wed Jun 13 07:33:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 07:33:45 2012] Deleting source due to low Poisson probability 0.9