[Wed Jun 13 06:24:31 2012] Detection parameters:
  Position = (424.3, 299.9) = 12 20 51.32 28 12 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.7 +/- 9.4
  Background counts = 14.3
  Rate = 0.003 +/- 0.0006

[Wed Jun 13 06:24:31 2012] Off-axis axis estimate = 9.13'
[Wed Jun 13 07:16:23 2012] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 07:16:23 2012] Initial guess for spatial extent in simple fitting = 10.99"
[Wed Jun 13 07:16:23 2012] source mask rpix=2.5, npix_max = 36, mask sum = 32, frac = 0.873
[Wed Jun 13 07:16:23 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.99"
[Wed Jun 13 07:33:43 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jun 13 07:33:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src11.csv
[Wed Jun 13 07:33:43 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jun 13 07:33:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src11.csv
[Wed Jun 13 07:33:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:33:43 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun 13 07:33:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jun 13 07:33:43 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun 13 07:33:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jun 13 07:33:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:33:50 2012] Spatial fit model total counts = 161.038000, observed total counts = 145.000000
[Wed Jun 13 07:33:50 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 07:33:50 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:33:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:33:50 2012] Assessing source extent using major
[Wed Jun 13 07:33:50 2012] Source does appear to be extended
[Wed Jun 13 07:33:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 07:33:50 2012] Deleting source due to low Poisson probability 0.7