[Wed Jun 13 06:24:31 2012] Detection parameters:
  Position = (312.6, 324.9) = 12 21 28.08 28 14 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.5 +/- 15.9
  Background counts = 19.7
  Rate = 0.004 +/- 0.0007

[Wed Jun 13 06:24:31 2012] Off-axis axis estimate = 2.17'
[Wed Jun 13 07:16:23 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 07:16:23 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Wed Jun 13 07:16:23 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.756
[Wed Jun 13 07:16:23 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.52"
[Wed Jun 13 07:33:43 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jun 13 07:33:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src7.csv
[Wed Jun 13 07:33:43 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jun 13 07:33:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src7.csv
[Wed Jun 13 07:33:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:33:43 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jun 13 07:33:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Jun 13 07:33:43 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jun 13 07:33:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Jun 13 07:33:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:33:50 2012] Source 12 is offset by 7.532639 and 3.559637 pixels which is larger than
2 X fitted extent = 2.626207 x 2.626207, not incorporating fit results
[Wed Jun 13 07:33:50 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:33:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:33:50 2012] Assessing source extent using major
[Wed Jun 13 07:33:50 2012] Source does appear to be extended
[Wed Jun 13 07:33:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 07:33:50 2012] Deleting source due to low Poisson probability 0.8