[Wed Jun 13 06:24:31 2012] Detection parameters:
  Position = (301.3, 321.9) = 12 21 31.80 28 13 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46511.9 +/- 254.0
  Background counts = 19.2
  Rate = 2 +/- 0.009

[Wed Jun 13 06:24:31 2012] Off-axis axis estimate = 1.71'
[Wed Jun 13 07:16:23 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 07:16:23 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jun 13 07:16:23 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Wed Jun 13 07:16:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Jun 13 07:33:43 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 13 07:33:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 07:33:43 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 13 07:33:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 07:33:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:33:43 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 13 07:33:43 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 13 07:33:43 2012] Fit fullrun_mos2_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 13 07:33:50 2012] Spatial fit model total counts = 41765.100000, observed total counts = 40661.000000
[Wed Jun 13 07:33:50 2012] Offset between fit and detection position for source 1 = 0.202266 pixels
[Wed Jun 13 07:33:50 2012] 41943.900000 total counts/ 10461.500000 bgd. counts: snr = 307.801586
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.202266 pixels
  Position = (301.1, 321.9) = 12 21 31.86 28 13 58.7
  Extent = 5.2 (5.2-5.3)", rotation angle = 0
  Source counts = 31482.4 +/- 204.8
  Background counts = 10461.5
  Rate = 1 +/- 0.007
[Wed Jun 13 07:33:50 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:33:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:33:50 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 07:33:50 2012] Source does appear to be extended
[Wed Jun 13 07:33:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 07:49:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 07:49:33 2012] Initial guess for spatial extent in simple fitting = 5.24"
[Wed Jun 13 07:49:33 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.376
[Wed Jun 13 07:49:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.24"
[Wed Jun 13 07:53:13 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 07:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211301_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 07:53:13 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 07:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211301_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 07:53:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502211301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502211301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:53:13 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 07:53:13 2012] fullrun_mos2_xmm0502211301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 07:53:13 2012] Fit fullrun_mos2_xmm0502211301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 13 07:53:16 2012] Spatial fit model total counts = 41766.400000, observed total counts = 40661.000000
[Wed Jun 13 07:53:16 2012] Offset between fit and detection position for source 1 = 0.000538 pixels
[Wed Jun 13 07:53:16 2012] 41942.900000 total counts/ 10451.300000 bgd. counts: snr = 308.041741
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000538 pixels
  Position = (301.1, 321.9) = 12 21 31.86 28 13 58.7
  Extent = 5.2 (5.2-5.3)", rotation angle = 0
  Source counts = 31491.6 +/- 204.8
  Background counts = 10451.3
  Rate = 1 +/- 0.007
[Wed Jun 13 07:53:16 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:53:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:53:16 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 07:53:16 2012] Source does appear to be extended
[Wed Jun 13 07:53:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 08:29:59 2012] Counts = 31491.600000, rescaling region sizes by 3.000000
[Wed Jun 13 08:29:59 2012] XMMSAS src. selection expression = ellipse(26149.707120, 27952.457800, 943.128027, 943.128027, 0.000000, X, Y)
[Wed Jun 13 08:29:59 2012] Writing source region out to fullrun_mos2_xmm0502211301_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 13 08:29:59 2012] Extracting stamp from image fullrun_mos2_xmm0502211301_pi300-10000_cl_sm2.00.img.gz, (247, 268) - (355, 376)
[Wed Jun 13 08:29:59 2012] XMMSAS bgd. selection expression = annulus(26149.707120, 27952.457800, 4715.640136, 9431.280271, X, Y) && !ellipse(25120.192719, 18671.738541, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 08:29:59 2012] Writing fullrun_mos2_xmm0502211301_pi300-10000_pass1_cl_src1.gif
[Wed Jun 13 08:30:05 2012] Mean detx,y = (95.05, 91.89) 
[Wed Jun 13 08:30:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 08:32:17 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 08:32:17 2012] Setting source spectrum file to fullrun_mos2_xmm0502211301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 08:32:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502211301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 13 08:43:11 2012] Updating aperture counts using extracted products
[Wed Jun 13 08:43:11 2012] Error reading totcts from fullrun_mos2_xmm0502211301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 08:43:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 08:43:11 2012] Using photon index=1.80, rate=1.12, arf fullrun_mos2_xmm0502211301_pi300-10000_pass1_cl_src1.arf
[Wed Jun 13 08:43:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 08:43:11 2012] Updating source flux to 1.2e-11
[Wed Jun 13 08:43:39 2012] Reading fit data from xmm0502211301/analysis//spectral/fullrun_mos2_xmm0502211301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun 13 08:43:39 2012] Spectral fit parameter nH value = 4.24339e+20
[Wed Jun 13 08:43:39 2012] Spectral fit parameter PhoIndex value = 2.81861
[Wed Jun 13 08:43:39 2012] Failed to get F(0.3-8.0) from xmm0502211301/analysis//spectral/fullrun_mos2_xmm0502211301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun 13 08:43:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 08:43:39 2012] Using Nh = 4.2e+20, photon index=2.82, rate=1.12, arf fullrun_mos2_xmm0502211301_pi300-10000_pass1_cl_src1.arf
[Wed Jun 13 08:43:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 08:43:39 2012] Updating source flux to 8.9e-12