[Wed Jun 13 06:24:19 2012] Detection parameters:
  Position = (307.5, 331.4) = 12 21 29.78 28 14 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.1 +/- 21.6
  Background counts = 22.8
  Rate = 0.008 +/- 0.0009

[Wed Jun 13 06:24:19 2012] Off-axis axis estimate = 2.48'
[Wed Jun 13 06:44:56 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 06:44:56 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Wed Jun 13 06:44:56 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.928
[Wed Jun 13 06:44:56 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.67"
[Wed Jun 13 07:16:23 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jun 13 07:16:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_src4.csv
[Wed Jun 13 07:16:23 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jun 13 07:16:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_src4.csv
[Wed Jun 13 07:16:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:16:23 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jun 13 07:16:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jun 13 07:16:23 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jun 13 07:16:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jun 13 07:16:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:33:48 2012] Warning, spatial fit 4 centroid is now closest to src. 13
[Wed Jun 13 07:33:48 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:33:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:33:48 2012] Assessing source extent using major
[Wed Jun 13 07:33:48 2012] Source does appear to be extended
[Wed Jun 13 07:33:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 07:35:40 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 07:35:40 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Wed Jun 13 07:35:40 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.928
[Wed Jun 13 07:35:40 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.67"
[Wed Jun 13 07:49:33 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jun 13 07:49:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_src4.csv
[Wed Jun 13 07:49:33 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jun 13 07:49:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_src4.csv
[Wed Jun 13 07:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:49:33 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jun 13 07:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jun 13 07:49:33 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jun 13 07:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jun 13 07:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:53:16 2012] Source 4 is offset by 7.518460 and 6.487424 pixels which is larger than
2 X fitted extent = 7.051724 x 7.051724, not incorporating fit results
[Wed Jun 13 07:53:16 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:53:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:53:16 2012] Assessing source extent using major
[Wed Jun 13 07:53:16 2012] Source does appear to be extended
[Wed Jun 13 07:53:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 08:04:18 2012] XMMSAS src. selection expression = ellipse(26701.106018, 28786.405853, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 13 08:04:18 2012] Writing source region out to fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src4_src.reg
[Wed Jun 13 08:04:18 2012] Extracting stamp from image fullrun_mos1_xmm0502211301_pi300-10000_cl_sm2.00.img.gz, (270, 294) - (345, 369)
[Wed Jun 13 08:04:18 2012] XMMSAS bgd. selection expression = annulus(26701.106018, 28786.405853, 1087.500000, 2175.000000, X, Y) && !ellipse(26163.485800, 27929.807200, 1253.148036, 1253.148036, 0.000000, X, Y) && !ellipse(26049.346771, 27164.926361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26689.057495, 27327.169891, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 08:04:18 2012] Writing fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src4.gif
[Wed Jun 13 08:06:38 2012] Mean detx,y = (626.05, 360.82) 
[Wed Jun 13 08:06:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 08:06:57 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 08:06:57 2012] Setting source spectrum file to fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jun 13 08:06:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Jun 13 08:24:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 08:24:53 2012] rmf not generated due to insufficient counts
[Wed Jun 13 08:43:11 2012] Updating aperture counts using extracted products
[Wed Jun 13 08:43:11 2012] Error reading totcts from fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jun 13 08:43:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 08:43:11 2012] Using photon index=1.80, rate=0.00751, arf fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src4.arf
[Wed Jun 13 08:43:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 08:43:11 2012] Updating source flux to 8.2e-14
[Wed Jun 13 08:43:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting