[Wed Jun 13 06:24:19 2012] Detection parameters:
  Position = (301.4, 321.7) = 12 21 31.76 28 13 58.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41829.0 +/- 240.7
  Background counts = 25.1
  Rate = 2 +/- 0.009

[Wed Jun 13 06:24:19 2012] Off-axis axis estimate = 1.70'
[Wed Jun 13 06:44:56 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 06:44:56 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Jun 13 06:44:56 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Wed Jun 13 06:44:56 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Jun 13 07:16:23 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 13 07:16:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 07:16:23 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 13 07:16:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 07:16:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:16:23 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 13 07:16:23 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 13 07:16:23 2012] Fit fullrun_mos1_xmm0502211301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 13 07:33:48 2012] Spatial fit model total counts = 36787.500000, observed total counts = 36283.000000
[Wed Jun 13 07:33:48 2012] Offset between fit and detection position for source 1 = 0.217164 pixels
[Wed Jun 13 07:33:48 2012] 36747.410000 total counts/ 8397.010000 bgd. counts: snr = 309.383292
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.217164 pixels
  Position = (301.3, 321.6) = 12 21 31.81 28 13 57.7
  Extent = 5.2 (5.1-5.2)", rotation angle = 0
  Source counts = 28350.4 +/- 191.7
  Background counts = 8397.0
  Rate = 1 +/- 0.007
[Wed Jun 13 07:33:48 2012] Spatial fit model total counts = 20155.500000, observed total counts = 27204.000000
[Wed Jun 13 07:33:48 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 07:33:48 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:33:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:33:48 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 07:33:48 2012] Source does appear to be extended
[Wed Jun 13 07:33:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 07:35:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 07:35:40 2012] Initial guess for spatial extent in simple fitting = 5.19"
[Wed Jun 13 07:35:40 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.785
[Wed Jun 13 07:35:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.19"
[Wed Jun 13 07:49:33 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 07:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 07:49:33 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 07:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 07:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:49:33 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 07:49:33 2012] fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 07:49:33 2012] Fit fullrun_mos1_xmm0502211301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 13 07:53:16 2012] Spatial fit model total counts = 36812.700000, observed total counts = 36326.000000
[Wed Jun 13 07:53:16 2012] Offset between fit and detection position for source 1 = 0.009122 pixels
[Wed Jun 13 07:53:16 2012] 36910.670000 total counts/ 8379.970000 bgd. counts: snr = 311.667269
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.009122 pixels
  Position = (301.3, 321.6) = 12 21 31.81 28 13 57.6
  Extent = 5.2 (5.2-5.3)", rotation angle = 0
  Source counts = 28530.7 +/- 192.1
  Background counts = 8380.0
  Rate = 1 +/- 0.007
[Wed Jun 13 07:53:16 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:53:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:53:16 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 07:53:16 2012] Source does appear to be extended
[Wed Jun 13 07:53:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 08:04:18 2012] Counts = 28530.700000, rescaling region sizes by 3.000000
[Wed Jun 13 08:04:18 2012] XMMSAS src. selection expression = ellipse(26163.485800, 27929.807200, 939.861027, 939.861027, 0.000000, X, Y)
[Wed Jun 13 08:04:18 2012] Writing source region out to fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 13 08:04:18 2012] Extracting stamp from image fullrun_mos1_xmm0502211301_pi300-10000_cl_sm2.00.img.gz, (247, 268) - (355, 376)
[Wed Jun 13 08:04:18 2012] XMMSAS bgd. selection expression = annulus(26163.485800, 27929.807200, 4699.305135, 9398.610270, X, Y) && !ellipse(26049.346771, 27164.926361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.106018, 28786.405853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26689.057495, 27327.169891, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 08:04:18 2012] Writing fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src1.gif
[Wed Jun 13 08:04:23 2012] Mean detx,y = (287.02, -248.41) 
[Wed Jun 13 08:04:25 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 08:06:03 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 08:06:03 2012] Setting source spectrum file to fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 08:06:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 13 08:43:11 2012] Updating aperture counts using extracted products
[Wed Jun 13 08:43:11 2012] Error reading totcts from fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 08:43:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 08:43:11 2012] Using photon index=1.80, rate=1.02, arf fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src1.arf
[Wed Jun 13 08:43:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 08:43:11 2012] Updating source flux to 9.8e-12
[Wed Jun 13 08:43:12 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed Jun 13 08:43:21 2012] Reading fit data from xmm0502211301/analysis//spectral/fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun 13 08:43:21 2012] Spectral fit parameter nH value = 3.82933e+20
[Wed Jun 13 08:43:21 2012] Spectral fit parameter PhoIndex value = 2.82943
[Wed Jun 13 08:43:21 2012] Failed to get F(0.3-8.0) from xmm0502211301/analysis//spectral/fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun 13 08:43:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 08:43:21 2012] Using Nh = 3.8e+20, photon index=2.83, rate=1.02, arf fullrun_mos1_xmm0502211301_pi300-10000_pass1_cl_src1.arf
[Wed Jun 13 08:43:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 08:43:21 2012] Updating source flux to 7.5e-12