[Mon Dec 26 10:27:56 2011] Detection parameters:
  Position = (301.9, 321.8) = 12 21 31.72 28 13 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13977.4 +/- 139.3
  Background counts = 24.3
  Rate = 1 +/- 0.01

[Mon Dec 26 10:27:56 2011] Off-axis axis estimate = 1.72'
[Mon Dec 26 11:05:20 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 11:05:20 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Dec 26 11:05:20 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Dec 26 11:05:20 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Dec 26 11:30:53 2011] fullrun_mos2_xmm0502211201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Dec 26 11:30:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211201_pi300-10000_cl_pass0_src1.csv
[Mon Dec 26 11:30:53 2011] fullrun_mos2_xmm0502211201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Dec 26 11:30:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211201_pi300-10000_cl_pass0_src1.csv
[Mon Dec 26 11:30:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502211201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502211201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 11:30:53 2011] fullrun_mos2_xmm0502211201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Dec 26 11:30:53 2011] fullrun_mos2_xmm0502211201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Dec 26 11:30:53 2011] Fit fullrun_mos2_xmm0502211201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Dec 26 11:31:04 2011] Spatial fit model total counts = 10171.000000, observed total counts = 10171.000000
[Mon Dec 26 11:31:04 2011] Offset between fit and detection position for source 1 = 0.160042 pixels
[Mon Dec 26 11:31:04 2011] 10105.670000 total counts/ 2088.620000 bgd. counts: snr = 175.422330
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.160042 pixels
  Position = (301.8, 321.7) = 12 21 31.76 28 13 57.6
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 8017.1 +/- 100.5
  Background counts = 2088.6
  Rate = 0.8 +/- 0.01
[Mon Dec 26 11:31:04 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 11:31:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 11:31:04 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 11:31:04 2011] Source does appear to be extended
[Mon Dec 26 11:31:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 12:02:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 26 12:02:56 2011] Initial guess for spatial extent in simple fitting = 5.38"
[Mon Dec 26 12:02:56 2011] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.994
[Mon Dec 26 12:02:56 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.38"
[Mon Dec 26 12:25:29 2011] fullrun_mos2_xmm0502211201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Dec 26 12:25:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211201_pi300-10000_cl_pass1_src1.csv
[Mon Dec 26 12:25:29 2011] fullrun_mos2_xmm0502211201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Dec 26 12:25:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502211201_pi300-10000_cl_pass1_src1.csv
[Mon Dec 26 12:25:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502211201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502211201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 12:25:29 2011] fullrun_mos2_xmm0502211201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Dec 26 12:25:29 2011] fullrun_mos2_xmm0502211201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Dec 26 12:25:29 2011] Fit fullrun_mos2_xmm0502211201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Dec 26 12:25:36 2011] Spatial fit model total counts = 10190.000000, observed total counts = 10190.000000
[Mon Dec 26 12:25:36 2011] Offset between fit and detection position for source 1 = 0.020597 pixels
[Mon Dec 26 12:25:36 2011] 10212.280000 total counts/ 2210.060000 bgd. counts: snr = 170.219165
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.020597 pixels
  Position = (301.7, 321.7) = 12 21 31.77 28 13 57.6
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 8002.2 +/- 101.1
  Background counts = 2210.1
  Rate = 0.8 +/- 0.01
[Mon Dec 26 12:25:36 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 12:25:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 12:25:36 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 12:25:36 2011] Source does appear to be extended
[Mon Dec 26 12:25:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 13:45:04 2011] Counts = 8002.220000, rescaling region sizes by 2.000000
[Mon Dec 26 13:45:04 2011] XMMSAS src. selection expression = ellipse(26203.607400, 27941.272400, 644.026819, 644.026819, 0.000000, X, Y)
[Mon Dec 26 13:45:04 2011] Writing source region out to fullrun_mos2_xmm0502211201_pi300-10000_pass1_cl_src1_src.reg
[Mon Dec 26 13:45:04 2011] Extracting stamp from image fullrun_mos2_xmm0502211201_pi300-10000_cl_sm2.00.img.gz, (265, 285) - (339, 359)
[Mon Dec 26 13:45:04 2011] XMMSAS bgd. selection expression = annulus(26203.607400, 27941.272400, 2146.756062, 4293.512124, X, Y)
[Mon Dec 26 13:45:04 2011] Writing fullrun_mos2_xmm0502211201_pi300-10000_pass1_cl_src1.gif
[Mon Dec 26 13:45:10 2011] Mean detx,y = (96.33, 95.45) 
[Mon Dec 26 13:45:14 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 13:46:17 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 13:46:17 2011] Setting source spectrum file to fullrun_mos2_xmm0502211201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 26 13:46:17 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502211201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Dec 26 14:09:05 2011] Updating aperture counts using extracted products
[Mon Dec 26 14:09:05 2011] Error reading totcts from fullrun_mos2_xmm0502211201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 26 14:09:06 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 14:09:06 2011] Using photon index=1.80, rate=0.842, arf fullrun_mos2_xmm0502211201_pi300-10000_pass1_cl_src1.arf
[Mon Dec 26 14:09:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 14:09:06 2011] Updating source flux to 9.5e-12
[Mon Dec 26 14:10:07 2011] Reading fit data from xmm0502211201/analysis//spectral/fullrun_mos2_xmm0502211201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Dec 26 14:10:07 2011] Spectral fit parameter nH value = 2.51895e+20
[Mon Dec 26 14:10:07 2011] Spectral fit parameter PhoIndex value = 2.75876
[Mon Dec 26 14:10:07 2011] Failed to get F(0.3-8.0) from xmm0502211201/analysis//spectral/fullrun_mos2_xmm0502211201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Dec 26 14:10:07 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 14:10:07 2011] Using Nh = 2.5e+20, photon index=2.76, rate=0.842, arf fullrun_mos2_xmm0502211201_pi300-10000_pass1_cl_src1.arf
[Mon Dec 26 14:10:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 14:10:07 2011] Updating source flux to 7.3e-12