[Thu Dec 22 10:14:16 2011] Detection parameters:
  Position = (207.9, 454.8) = 12 22 2.48 28 23 37.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.8 +/- 15.0
  Background counts = 5.5
  Rate = 0.01 +/- 0.001

[Thu Dec 22 10:14:16 2011] Off-axis axis estimate = 13.10'
[Thu Dec 22 10:15:40 2011] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 10:15:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 22 10:15:40 2011] Initial guess for spatial extent in simple fitting = 12.98"
[Thu Dec 22 10:15:40 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.009
[Thu Dec 22 10:15:40 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.98"
[Thu Dec 22 10:28:09 2011] fullrun_mos1_xmm0502211101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Dec 22 10:28:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502211101_pi300-10000_cl_pass0_src3.csv
[Thu Dec 22 10:28:09 2011] fullrun_mos1_xmm0502211101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Dec 22 10:28:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502211101_pi300-10000_cl_pass0_src3.csv
[Thu Dec 22 10:28:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502211101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502211101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 10:28:09 2011] fullrun_mos1_xmm0502211101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Dec 22 10:28:09 2011] fullrun_mos1_xmm0502211101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Dec 22 10:28:09 2011] Fit fullrun_mos1_xmm0502211101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Dec 22 10:49:27 2011] Spatial fit model total counts = 187.101000, observed total counts = 188.000000
[Thu Dec 22 10:49:27 2011] Offset between fit and detection position for source 3 = 0.187876 pixels
[Thu Dec 22 10:49:27 2011] 187.968700 total counts/ 76.162700 bgd. counts: snr = 12.811322
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.187876 pixels
  Position = (207.7, 454.7) = 12 22 2.52 28 23 36.3
  Extent = 6.2 (5.1-7.2)", rotation angle = 0
  Source counts = 111.8 +/- 13.7
  Background counts = 76.2
  Rate = 0.01 +/- 0.001
[Thu Dec 22 10:49:27 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 10:49:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 10:49:27 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 10:49:27 2011] Source does appear to be extended
[Thu Dec 22 10:49:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 10:49:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 10:49:35 2011] Initial guess for spatial extent in simple fitting = 6.21"
[Thu Dec 22 10:49:35 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.078
[Thu Dec 22 10:49:35 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 6.21"
[Thu Dec 22 10:59:35 2011] fullrun_mos1_xmm0502211101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Dec 22 10:59:35 2011] fullrun_mos1_xmm0502211101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Dec 22 10:59:35 2011] Fit fullrun_mos1_xmm0502211101_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu Dec 22 10:59:35 2011] fullrun_mos1_xmm0502211101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Dec 22 10:59:35 2011] fullrun_mos1_xmm0502211101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Dec 22 10:59:35 2011] Fit fullrun_mos1_xmm0502211101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Dec 22 11:20:03 2011] Spatial fit model total counts = 180.094000, observed total counts = 180.000000
[Thu Dec 22 11:20:03 2011] Offset between fit and detection position for source 3 = 0.017079 pixels
[Thu Dec 22 11:20:03 2011] 179.927700 total counts/ 71.348700 bgd. counts: snr = 12.854429
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.017079 pixels
  Position = (207.7, 454.7) = 12 22 2.52 28 23 36.3
  Extent = 6.0 (4.8-7.0)", rotation angle = 0
  Source counts = 108.6 +/- 13.4
  Background counts = 71.3
  Rate = 0.01 +/- 0.001
[Thu Dec 22 11:20:03 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 11:20:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 11:20:03 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 11:20:03 2011] Source does appear to be extended
[Thu Dec 22 11:20:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 11:20:13 2011] XMMSAS src. selection expression = ellipse(18025.723400, 39506.752000, 357.406810, 357.406810, 0.000000, X, Y)
[Thu Dec 22 11:20:13 2011] Writing source region out to fullrun_mos1_xmm0502211101_pi300-10000_pass1_cl_src3_src.reg
[Thu Dec 22 11:20:13 2011] Extracting stamp from image fullrun_mos1_xmm0502211101_pi300-10000_cl_sm2.00.img.gz, (187, 434) - (228, 475)
[Thu Dec 22 11:20:13 2011] XMMSAS bgd. selection expression = annulus(18025.723400, 39506.752000, 595.678017, 1191.356034, X, Y)
[Thu Dec 22 11:20:13 2011] Writing fullrun_mos1_xmm0502211101_pi300-10000_pass1_cl_src3.gif
[Thu Dec 22 11:21:09 2011] Mean detx,y = (14294.84, -2160.10) 
[Thu Dec 22 11:21:12 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 22 11:21:23 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 22 11:21:24 2011] Setting source spectrum file to fullrun_mos1_xmm0502211101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Dec 22 11:21:24 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502211101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Dec 22 11:39:43 2011] Updating aperture counts using extracted products
[Thu Dec 22 11:39:43 2011] Error reading totcts from fullrun_mos1_xmm0502211101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Dec 22 11:39:44 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 11:39:44 2011] Using photon index=1.80, rate=0.00957, arf fullrun_mos1_xmm0502211101_pi300-10000_pass1_cl_src3.arf
[Thu Dec 22 11:39:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 11:39:44 2011] Updating source flux to 2.8e-13
[Thu Dec 22 11:40:05 2011] Reading fit data from xmm0502211101/analysis//spectral/fullrun_mos1_xmm0502211101_pi300-10000_pass1_cl_src3_pl.csv
[Thu Dec 22 11:40:05 2011] Spectral fit parameter nH value = 1.20936e+13
[Thu Dec 22 11:40:05 2011] Spectral fit parameter PhoIndex value = 1.98509
[Thu Dec 22 11:40:05 2011] Failed to get F(0.3-8.0) from xmm0502211101/analysis//spectral/fullrun_mos1_xmm0502211101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Dec 22 11:40:05 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 11:40:05 2011] Using Nh = 1.2e+13, photon index=1.99, rate=0.00957, arf fullrun_mos1_xmm0502211101_pi300-10000_pass1_cl_src3.arf
[Thu Dec 22 11:40:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 11:40:05 2011] Updating source flux to 2.6e-13