[Thu Dec  1 15:42:23 2011] Detection parameters:
  Position = (284.7, 279.0) = 18 8 39.23 -20 24 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7804.9 +/- 105.2
  Background counts = 38.7
  Rate = 0.2 +/- 0.003

[Thu Dec  1 15:42:23 2011] Off-axis axis estimate = 1.72'
[Thu Dec  1 15:58:27 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 15:58:27 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Dec  1 15:58:27 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Dec  1 15:58:27 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Dec  1 16:18:33 2011] fullrun_mos2_xmm0502170401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Dec  1 16:18:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502170401_pi300-10000_cl_pass0_src1.csv
[Thu Dec  1 16:18:33 2011] fullrun_mos2_xmm0502170401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Dec  1 16:18:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502170401_pi300-10000_cl_pass0_src1.csv
[Thu Dec  1 16:18:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502170401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502170401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 16:18:33 2011] fullrun_mos2_xmm0502170401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Dec  1 16:18:33 2011] fullrun_mos2_xmm0502170401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Dec  1 16:18:33 2011] Fit fullrun_mos2_xmm0502170401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Dec  1 16:18:37 2011] Spatial fit model total counts = 7331.820000, observed total counts = 7344.000000
[Thu Dec  1 16:18:37 2011] Offset between fit and detection position for source 1 = 0.037147 pixels
[Thu Dec  1 16:18:37 2011] 7375.030000 total counts/ 1925.660000 bgd. counts: snr = 124.181383
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.037147 pixels
  Position = (284.7, 279.1) = 18 8 39.24 -20 24 38.6
  Extent = 5.5 (5.3-5.6)", rotation angle = 0
  Source counts = 5449.4 +/- 85.9
  Background counts = 1925.7
  Rate = 0.2 +/- 0.003
[Thu Dec  1 16:18:37 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 16:18:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 16:18:37 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 16:18:37 2011] Source does appear to be extended
[Thu Dec  1 16:18:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 16:27:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec  1 16:27:30 2011] Initial guess for spatial extent in simple fitting = 5.49"
[Thu Dec  1 16:27:30 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.289
[Thu Dec  1 16:27:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.49"
[Thu Dec  1 16:46:19 2011] fullrun_mos2_xmm0502170401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Dec  1 16:46:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502170401_pi300-10000_cl_pass1_src1.csv
[Thu Dec  1 16:46:19 2011] fullrun_mos2_xmm0502170401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Dec  1 16:46:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502170401_pi300-10000_cl_pass1_src1.csv
[Thu Dec  1 16:46:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502170401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502170401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 16:46:19 2011] fullrun_mos2_xmm0502170401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Dec  1 16:46:19 2011] fullrun_mos2_xmm0502170401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Dec  1 16:46:19 2011] Fit fullrun_mos2_xmm0502170401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Dec  1 16:46:23 2011] Spatial fit model total counts = 7324.480000, observed total counts = 7335.000000
[Thu Dec  1 16:46:23 2011] Offset between fit and detection position for source 1 = 0.006554 pixels
[Thu Dec  1 16:46:23 2011] 7390.610000 total counts/ 2010.060000 bgd. counts: snr = 120.011306
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.006554 pixels
  Position = (284.7, 279.1) = 18 8 39.24 -20 24 38.6
  Extent = 5.4 (5.2-5.5)", rotation angle = 0
  Source counts = 5380.6 +/- 86.0
  Background counts = 2010.1
  Rate = 0.2 +/- 0.003
[Thu Dec  1 16:46:23 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 16:46:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 16:46:23 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 16:46:23 2011] Source does appear to be extended
[Thu Dec  1 16:46:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 17:00:36 2011] Counts = 5380.550000, rescaling region sizes by 2.000000
[Thu Dec  1 17:00:36 2011] XMMSAS src. selection expression = ellipse(24723.833600, 24230.660200, 644.174419, 644.174419, 0.000000, X, Y)
[Thu Dec  1 17:00:36 2011] Writing source region out to fullrun_mos2_xmm0502170401_pi300-10000_pass1_cl_src1_src.reg
[Thu Dec  1 17:00:36 2011] Extracting stamp from image fullrun_mos2_xmm0502170401_pi300-10000_cl_sm2.00.img.gz, (248, 242) - (322, 316)
[Thu Dec  1 17:00:36 2011] XMMSAS bgd. selection expression = annulus(24723.833600, 24230.660200, 2147.248062, 4294.496124, X, Y) && !ellipse(21177.553372, 26669.294200, 395.317611, 395.317611, 0.000000, X, Y)
[Thu Dec  1 17:00:36 2011] Writing fullrun_mos2_xmm0502170401_pi300-10000_pass1_cl_src1.gif
[Thu Dec  1 17:00:39 2011] Mean detx,y = (59.26, 92.04) 
[Thu Dec  1 17:00:40 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 17:00:53 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 17:00:53 2011] Setting source spectrum file to fullrun_mos2_xmm0502170401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec  1 17:00:53 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502170401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Dec  1 17:16:44 2011] Updating aperture counts using extracted products
[Thu Dec  1 17:16:44 2011] Error reading totcts from fullrun_mos2_xmm0502170401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec  1 17:16:44 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 17:16:44 2011] Using photon index=1.80, rate=0.165, arf fullrun_mos2_xmm0502170401_pi300-10000_pass1_cl_src1.arf
[Thu Dec  1 17:16:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 17:16:44 2011] Updating source flux to 1.8e-12
[Thu Dec  1 17:17:17 2011] Reading fit data from xmm0502170401/analysis//spectral/fullrun_mos2_xmm0502170401_pi300-10000_pass1_cl_src1_pl.csv
[Thu Dec  1 17:17:17 2011] Spectral fit parameter nH value = 7.57301e+22
[Thu Dec  1 17:17:17 2011] Spectral fit parameter PhoIndex value = 2.14532
[Thu Dec  1 17:17:17 2011] Failed to get F(0.3-8.0) from xmm0502170401/analysis//spectral/fullrun_mos2_xmm0502170401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Dec  1 17:17:17 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 17:17:17 2011] Using Nh = 7.6e+22, photon index=2.15, rate=0.165, arf fullrun_mos2_xmm0502170401_pi300-10000_pass1_cl_src1.arf
[Thu Dec  1 17:17:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 17:17:17 2011] Updating source flux to 5e-12