[Tue Feb 21 09:58:45 2012] Detection parameters:
  Position = (311.9, 318.0) = 18 8 39.28 -20 24 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8656.5 +/- 110.8
  Background counts = 25.6
  Rate = 0.3 +/- 0.004

[Tue Feb 21 09:58:46 2012] Off-axis axis estimate = 1.72'
[Tue Feb 21 10:40:10 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 10:40:10 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Feb 21 10:40:10 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Tue Feb 21 10:40:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Feb 21 11:19:19 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Feb 21 11:19:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_src1.csv
[Tue Feb 21 11:19:19 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Feb 21 11:19:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_src1.csv
[Tue Feb 21 11:19:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 11:19:19 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Feb 21 11:19:19 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Feb 21 11:19:19 2012] Fit fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Feb 21 11:19:31 2012] Spatial fit model total counts = 8003.000000, observed total counts = 8003.000000
[Tue Feb 21 11:19:31 2012] Offset between fit and detection position for source 2 = 0.159083 pixels
[Tue Feb 21 11:19:31 2012] 7951.940000 total counts/ 1929.590000 bgd. counts: snr = 137.098743
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.159083 pixels
  Position = (311.8, 318.0) = 18 8 39.33 -20 24 39.6
  Extent = 5.5 (5.3-5.6)", rotation angle = 0
  Source counts = 6022.4 +/- 89.2
  Background counts = 1929.6
  Rate = 0.2 +/- 0.003
[Tue Feb 21 11:19:31 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 11:19:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 11:19:31 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 11:19:31 2012] Source does appear to be extended
[Tue Feb 21 11:19:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 11:44:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 11:44:48 2012] Initial guess for spatial extent in simple fitting = 5.48"
[Tue Feb 21 11:44:48 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.292
[Tue Feb 21 11:44:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.48"
[Tue Feb 21 12:11:57 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 21 12:11:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_src1.csv
[Tue Feb 21 12:11:57 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 21 12:11:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_src1.csv
[Tue Feb 21 12:11:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 12:11:57 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 21 12:11:57 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 21 12:11:57 2012] Fit fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 21 12:12:07 2012] Spatial fit model total counts = 8032.640000, observed total counts = 8058.000000
[Tue Feb 21 12:12:07 2012] Offset between fit and detection position for source 2 = 0.021597 pixels
[Tue Feb 21 12:12:07 2012] 8034.150000 total counts/ 2103.440000 bgd. counts: snr = 129.312832
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.021597 pixels
  Position = (311.8, 318.0) = 18 8 39.34 -20 24 39.6
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 5930.7 +/- 89.6
  Background counts = 2103.4
  Rate = 0.2 +/- 0.003
[Tue Feb 21 12:12:07 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 12:12:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 12:12:07 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 12:12:07 2012] Source does appear to be extended
[Tue Feb 21 12:12:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 12:44:47 2012] Counts = 5930.710000, rescaling region sizes by 2.000000
[Tue Feb 21 12:44:47 2012] XMMSAS src. selection expression = ellipse(27074.639200, 27616.305400, 648.484819, 648.484819, 0.000000, X, Y)
[Tue Feb 21 12:44:47 2012] Writing source region out to fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src2_src.reg
[Tue Feb 21 12:44:47 2012] Extracting stamp from image fullrun_mos2_xmm0502170301_pi300-10000_cl_sm2.00.img.gz, (274, 281) - (349, 355)
[Tue Feb 21 12:44:47 2012] XMMSAS bgd. selection expression = annulus(27074.639200, 27616.305400, 2161.616062, 4323.232124, X, Y) && !ellipse(25908.755005, 28451.054413, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 12:44:47 2012] Writing fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src2.gif
[Tue Feb 21 12:44:51 2012] Mean detx,y = (71.73, 92.07) 
[Tue Feb 21 12:44:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 12:45:08 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 12:45:08 2012] Setting source spectrum file to fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Feb 21 12:45:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Feb 21 12:59:45 2012] Updating aperture counts using extracted products
[Tue Feb 21 12:59:45 2012] Error reading totcts from fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Feb 21 12:59:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 12:59:45 2012] Using photon index=1.80, rate=0.194, arf fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src2.arf
[Tue Feb 21 12:59:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 12:59:45 2012] Updating source flux to 2.1e-12
[Tue Feb 21 13:01:07 2012] Reading fit data from xmm0502170301/analysis//spectral/fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src2_pl.csv
[Tue Feb 21 13:01:07 2012] Spectral fit parameter nH value = 7.33277e+22
[Tue Feb 21 13:01:07 2012] Spectral fit parameter PhoIndex value = 2.02167
[Tue Feb 21 13:01:07 2012] Failed to get F(0.3-8.0) from xmm0502170301/analysis//spectral/fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Feb 21 13:01:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 13:01:07 2012] Using Nh = 7.3e+22, photon index=2.02, rate=0.194, arf fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src2.arf
[Tue Feb 21 13:01:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 13:01:07 2012] Updating source flux to 5.9e-12