[Tue Feb 21 09:58:45 2012] Detection parameters:
  Position = (298.4, 327.6) = 18 8 43.48 -20 23 55.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.8 +/- 11.4
  Background counts = 24.1
  Rate = 0.002 +/- 0.0004

[Tue Feb 21 09:58:46 2012] Off-axis axis estimate = 2.11'
[Tue Feb 21 10:40:10 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 10:40:10 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Tue Feb 21 10:40:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.267
[Tue Feb 21 10:40:10 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.49"
[Tue Feb 21 11:19:19 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_src11.ximg exists
[Tue Feb 21 11:19:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_src11.csv
[Tue Feb 21 11:19:19 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Feb 21 11:19:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_src11.csv
[Tue Feb 21 11:19:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 11:19:19 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Feb 21 11:19:19 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Feb 21 11:19:19 2012] Fit fullrun_mos2_xmm0502170301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Feb 21 11:19:31 2012] Source 11 is offset by -5.657437 and 4.155062 pixels which is larger than
2 X fitted extent = 0.860349 x 0.860349, not incorporating fit results
[Tue Feb 21 11:19:31 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 11:19:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 11:19:31 2012] Assessing source extent using major
[Tue Feb 21 11:19:31 2012] Source does appear to be extended
[Tue Feb 21 11:19:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 11:44:48 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 11:44:48 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Tue Feb 21 11:44:48 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.267
[Tue Feb 21 11:44:48 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.49"
[Tue Feb 21 12:11:57 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_src7.ximg exists
[Tue Feb 21 12:11:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_src7.csv
[Tue Feb 21 12:11:57 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Feb 21 12:11:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_src7.csv
[Tue Feb 21 12:11:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 12:11:57 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Feb 21 12:11:57 2012] fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Feb 21 12:11:57 2012] Fit fullrun_mos2_xmm0502170301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Feb 21 12:12:07 2012] Source 11 is offset by 7.242058 and -5.191237 pixels which is larger than
2 X fitted extent = 6.882805 x 6.882805, not incorporating fit results
[Tue Feb 21 12:12:07 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 12:12:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 12:12:07 2012] Assessing source extent using major
[Tue Feb 21 12:12:07 2012] Source does appear to be extended
[Tue Feb 21 12:12:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 12:44:47 2012] XMMSAS src. selection expression = ellipse(25908.755005, 28451.054413, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 12:44:47 2012] Writing source region out to fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src11_src.reg
[Tue Feb 21 12:44:47 2012] Extracting stamp from image fullrun_mos2_xmm0502170301_pi300-10000_cl_sm2.00.img.gz, (261, 290) - (336, 365)
[Tue Feb 21 12:44:47 2012] XMMSAS bgd. selection expression = annulus(25908.755005, 28451.054413, 1087.500000, 2175.000000, X, Y) && !ellipse(27074.639200, 27616.305400, 432.323212, 432.323212, 0.000000, X, Y)
[Tue Feb 21 12:44:47 2012] Writing fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src11.gif
[Tue Feb 21 12:47:35 2012] Mean detx,y = (1126.50, 839.20) 
[Tue Feb 21 12:47:37 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 12:47:53 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 12:47:53 2012] Setting source spectrum file to fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Feb 21 12:47:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Feb 21 12:58:50 2012] Not generating rmf since there are only 47 counts
[Tue Feb 21 12:58:50 2012] rmf not generated due to insufficient counts
[Tue Feb 21 12:59:45 2012] Updating aperture counts using extracted products
[Tue Feb 21 12:59:45 2012] Error reading totcts from fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Feb 21 12:59:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 12:59:45 2012] Using photon index=1.80, rate=0.00167, arf fullrun_mos2_xmm0502170301_pi300-10000_pass1_cl_src11.arf
[Tue Feb 21 12:59:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 12:59:45 2012] Updating source flux to 1.7e-14
[Tue Feb 21 13:00:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting