[Mon Oct 31 20:39:41 2011] Detection parameters:
  Position = (277.2, 307.0) = 12 43 44.58 11 35 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 361.6 +/- 32.8
  Background counts = 189.0
  Rate = 0.006 +/- 0.0005

[Mon Oct 31 20:39:43 2011] Off-axis axis estimate = 1.66'
[Mon Oct 31 20:45:05 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 20:45:05 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Oct 31 20:45:05 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Mon Oct 31 20:45:05 2011] Giving source the simple spatial ID 72 for pass 0, mean size = 7.26"
[Tue Nov  1 01:27:57 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_src72.ximg exists
[Tue Nov  1 01:27:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_src72.csv
[Tue Nov  1 01:27:57 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_src72_1.ximg exists
[Tue Nov  1 01:27:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_src72.csv
[Tue Nov  1 01:27:57 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 01:27:58 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Tue Nov  1 01:27:58 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Tue Nov  1 01:27:58 2011] Fit fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly
[Tue Nov  1 06:35:07 2011] Spatial fit model total counts = 2770.040000, observed total counts = 2768.000000
[Tue Nov  1 06:35:07 2011] Offset between fit and detection position for source 79 = 2.079806 pixels
[Tue Nov  1 06:35:07 2011] Warning, changing simple spatial fit ID from 72 to 67
[Tue Nov  1 06:35:07 2011] 2643.831000 total counts/ 2347.560000 bgd. counts: snr = 6.114779
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 2.079806 pixels
  Position = (277.4, 309.1) = 12 43 44.55 11 35 33.9
  Extent = 15.0 (15.0-30.1)", rotation angle = 0
  Source counts = 296.3 +/- 51.4
  Background counts = 2347.6
  Rate = 0.004 +/- 0.0007
[Tue Nov  1 06:35:07 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 06:35:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 06:35:07 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 06:35:07 2011] Source does appear to be extended
[Tue Nov  1 06:35:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 06:35:07 2011] Source is confused with source 74
[Tue Nov  1 06:35:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 06:35:36 2011] Initial guess for spatial extent in simple fitting = 15.04"
[Tue Nov  1 06:35:36 2011] source mask rpix=3.5, npix_max = 62, mask sum = 64, frac = 1.022
[Tue Nov  1 06:35:36 2011] Giving source the simple spatial ID 66 for pass 1, mean size = 15.04"
[Tue Nov  1 09:43:32 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_src66.ximg exists
[Tue Nov  1 09:43:32 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_src66_1.ximg exists
[Tue Nov  1 09:43:32 2011] Fit fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_src66 appears to have run properly
[Tue Nov  1 09:43:33 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Tue Nov  1 09:43:33 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Tue Nov  1 09:43:33 2011] Fit fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src66 appears to have run properly
[Tue Nov  1 12:58:45 2011] Spatial fit model total counts = 2771.510000, observed total counts = 2768.000000
[Tue Nov  1 12:58:45 2011] Offset between fit and detection position for source 79 = 0.421795 pixels
[Tue Nov  1 12:58:45 2011] Warning, changing simple spatial fit ID from 66 to 62
[Tue Nov  1 12:58:45 2011] 2629.286000 total counts/ 2261.100000 bgd. counts: snr = 7.742967
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 0.421795 pixels
  Position = (277.3, 309.5) = 12 43 44.55 11 35 35.8
  Extent = 15.0 (15.0-30.1)", rotation angle = 0
  Source counts = 368.2 +/- 51.3
  Background counts = 2261.1
  Rate = 0.005 +/- 0.0007
[Tue Nov  1 12:58:46 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 12:58:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 12:58:46 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 12:58:46 2011] Source does appear to be extended
[Tue Nov  1 12:58:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 12:59:16 2011] XMMSAS src. selection expression = ellipse(24080.886000, 26878.704000, 902.208026, 902.208026, 0.000000, X, Y)
[Tue Nov  1 12:59:16 2011] Writing source region out to fullrun_pn_xmm0502160101_pi300-10000_pass1_cl_src79_src.reg
[Tue Nov  1 12:59:16 2011] Extracting stamp from image fullrun_pn_xmm0502160101_pi300-10000_cl_sm2.00.img.gz, (225, 258) - (329, 361)
[Tue Nov  1 12:59:16 2011] XMMSAS bgd. selection expression = annulus(24080.886000, 26878.704000, 1503.680043, 3007.360087, X, Y) && !ellipse(25417.804580, 23934.566000, 2829.048081, 2829.048081, 0.000000, X, Y) && !ellipse(20267.417786, 27933.254669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25885.911100, 26682.137600, 390.016011, 390.016011, 0.000000, X, Y) && !ellipse(27570.768400, 26128.966380, 1124.088032, 533.867215, 64.276000, X, Y) && !ellipse(24863.015200, 25625.512800, 511.554415, 511.554415, 0.000000, X, Y) && !ellipse(26821.523800, 25500.106400, 902.640026, 338.507210, 193.003000, X, Y) && !ellipse(27594.308319, 25409.476746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27417.292000, 24318.508000, 708.176820, 708.176820, 0.000000, X, Y) && !ellipse(27193.636600, 23187.036000, 877.072025, 877.072025, 0.000000, X, Y) && !ellipse(26198.100098, 28416.313354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20992.611340, 23913.957600, 391.017611, 391.017611, 0.000000, X, Y) && !ellipse(21943.276000, 31284.952000, 3143.120090, 3143.120090, 0.000000, X, Y) && !ellipse(22304.796000, 30408.200000, 1443.000042, 1443.000042, 0.000000, X, Y) && !ellipse(23213.560425, 29366.216461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23132.999250, 28442.346626, 1258.824036, 919.547268, 86.939825, X, Y) && !ellipse(23088.723602, 27900.032288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26719.253400, 27531.302200, 270.460008, 270.460008, 0.000000, X, Y) && !ellipse(23729.111359, 27351.054535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23800.008606, 25871.961609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23204.684000, 26071.133000, 483.780814, 483.780814, 0.000000, X, Y) && !ellipse(21936.280258, 24909.293121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22358.016000, 24413.538000, 1271.064037, 1271.064037, 0.000000, X, Y) && !ellipse(27921.362793, 23609.234131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22894.034000, 23847.148000, 616.603218, 616.603218, 0.000000, X, Y)
[Tue Nov  1 12:59:16 2011] Writing fullrun_pn_xmm0502160101_pi300-10000_pass1_cl_src79.gif
[Tue Nov  1 14:25:52 2011] Mean detx,y = (190.79, 3052.81) 
[Tue Nov  1 14:25:55 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov  1 14:26:11 2011] Binned source spectrum to 10 counts/bin
[Tue Nov  1 14:26:12 2011] Setting source spectrum file to fullrun_pn_xmm0502160101_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Tue Nov  1 14:26:12 2011] Setting bgd. spectrum file to fullrun_pn_xmm0502160101_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Wed Nov  2 04:54:18 2011] Updating aperture counts using extracted products
[Wed Nov  2 04:54:18 2011] Error reading totcts from fullrun_pn_xmm0502160101_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Wed Nov  2 04:54:21 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  2 04:54:21 2011] Using photon index=1.80, rate=0.00507, arf fullrun_pn_xmm0502160101_pi300-10000_pass1_cl_src79.arf
[Wed Nov  2 04:54:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov  2 04:54:21 2011] Updating source flux to 1.4e-14
[Wed Nov  2 05:01:03 2011] Flag c found in src. 79 procflags, skipping spectral fitting