[Mon Oct 31 20:39:39 2011] Detection parameters:
  Position = (284.9, 253.7) = 12 43 42.31 11 31 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 525.1 +/- 35.8
  Background counts = 190.7
  Rate = 0.009 +/- 0.0006

[Mon Oct 31 20:39:43 2011] Off-axis axis estimate = 3.39'
[Mon Oct 31 20:45:05 2011] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 20:45:05 2011] Initial guess for spatial extent in simple fitting = 8.12"
[Mon Oct 31 20:45:05 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.892
[Mon Oct 31 20:45:05 2011] Giving source the simple spatial ID 34 for pass 0, mean size = 8.12"
[Tue Nov  1 01:27:56 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_src34.ximg exists
[Tue Nov  1 01:27:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_src34.csv
[Tue Nov  1 01:27:56 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_src34_1.ximg exists
[Tue Nov  1 01:27:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_src34.csv
[Tue Nov  1 01:27:56 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 01:27:57 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Tue Nov  1 01:27:57 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Tue Nov  1 01:27:57 2011] Fit fullrun_pn_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Tue Nov  1 06:35:07 2011] Spatial fit model total counts = 4543.090000, observed total counts = 4545.000000
[Tue Nov  1 06:35:07 2011] Offset between fit and detection position for source 41 = 4.439508 pixels
[Tue Nov  1 06:35:07 2011] 4255.130000 total counts/ 3097.610000 bgd. counts: snr = 20.797692
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 4.439508 pixels
  Position = (289.1, 252.2) = 12 43 41.07 11 31 26.7
  Extent = 16.2 (16.2-32.5)", rotation angle = 0
  Source counts = 1157.5 +/- 65.2
  Background counts = 3097.6
  Rate = 0.02 +/- 0.0009
[Tue Nov  1 06:35:07 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 06:35:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 06:35:07 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 06:35:07 2011] Source does appear to be extended
[Tue Nov  1 06:35:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 06:35:07 2011] Source is confused with source 27
[Tue Nov  1 06:35:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 06:35:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov  1 06:35:36 2011] Initial guess for spatial extent in simple fitting = 16.25"
[Tue Nov  1 06:35:36 2011] source mask rpix=3.7, npix_max = 71, mask sum = 64, frac = 0.892
[Tue Nov  1 06:35:36 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 16.25"
[Tue Nov  1 09:43:31 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_src33.ximg exists
[Tue Nov  1 09:43:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_src33.csv
[Tue Nov  1 09:43:31 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue Nov  1 09:43:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_src33.csv
[Tue Nov  1 09:43:31 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 09:43:32 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue Nov  1 09:43:32 2011] fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Nov  1 09:43:32 2011] Fit fullrun_pn_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue Nov  1 12:58:45 2011] Warning, spatial fit 33 centroid is now closest to src. 25
[Tue Nov  1 12:58:45 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 12:58:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 12:58:45 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 12:58:45 2011] Source does appear to be extended
[Tue Nov  1 12:58:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 12:59:15 2011] Counts = 1157.520000, rescaling region sizes by 2.000000
[Tue Nov  1 12:59:15 2011] XMMSAS src. selection expression = ellipse(25104.366000, 21896.856000, 1949.544056, 1949.544056, 0.000000, X, Y)
[Tue Nov  1 12:59:15 2011] Writing source region out to fullrun_pn_xmm0502160101_pi300-10000_pass1_cl_src41_src.reg
[Tue Nov  1 12:59:15 2011] Extracting stamp from image fullrun_pn_xmm0502160101_pi300-10000_cl_sm2.00.img.gz, (177, 140) - (401, 364)
[Tue Nov  1 12:59:15 2011] XMMSAS bgd. selection expression = annulus(25104.366000, 21896.856000, 6498.480187, 12996.960374, X, Y) && !ellipse(25417.804580, 23934.566000, 2829.048081, 2829.048081, 0.000000, X, Y) && !ellipse(37850.067871, 27520.349823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37052.898649, 27246.278545, 576.256492, 303.743077, 76.654842, X, Y) && !ellipse(17480.820800, 26643.828600, 415.507212, 415.507212, 0.000000, X, Y) && !ellipse(26415.969680, 20345.798600, 406.774412, 406.774412, 0.000000, X, Y) && !ellipse(32819.420200, 30942.176400, 529.722415, 358.794410, 55.826000, X, Y) && !ellipse(27706.137888, 31960.188400, 417.752012, 417.752012, 0.000000, X, Y) && !ellipse(20267.417786, 27933.254669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25885.911100, 26682.137600, 390.016011, 390.016011, 0.000000, X, Y) && !ellipse(27570.768400, 26128.966380, 1124.088032, 533.867215, 64.276000, X, Y) && !ellipse(24863.015200, 25625.512800, 511.554415, 511.554415, 0.000000, X, Y) && !ellipse(26821.523800, 25500.106400, 902.640026, 338.507210, 193.003000, X, Y) && !ellipse(27594.308319, 25409.476746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27417.292000, 24318.508000, 708.176820, 708.176820, 0.000000, X, Y) && !ellipse(16979.753418, 24592.842834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16711.968600, 24317.240120, 422.940812, 422.940812, 0.000000, X, Y) && !ellipse(27360.036000, 23348.354000, 438.536013, 438.536013, 0.000000, X, Y) && !ellipse(27193.636600, 23187.036000, 877.072025, 877.072025, 0.000000, X, Y) && !ellipse(23340.648000, 23327.968000, 455.868813, 455.868813, 0.000000, X, Y) && !ellipse(23338.228560, 23251.339800, 476.504814, 476.504814, 0.000000, X, Y) && !ellipse(24087.426147, 22529.101837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26352.432600, 22462.020000, 1297.808037, 1297.808037, 0.000000, X, Y) && !ellipse(25395.256000, 22447.822000, 457.208813, 457.208813, 0.000000, X, Y) && !ellipse(27752.075400, 22285.197600, 407.654412, 407.654412, 0.000000, X, Y) && !ellipse(27562.026000, 20213.400000, 404.454412, 404.454412, 0.000000, X, Y) && !ellipse(17655.187561, 33092.563354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26198.100098, 28416.313354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34274.948792, 10175.081924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32790.715729, 27263.791687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37663.175049, 26659.445953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14708.607000, 26030.948800, 406.507212, 406.507212, 0.000000, X, Y) && !ellipse(17609.176220, 25358.980400, 329.357609, 329.357609, 0.000000, X, Y) && !ellipse(20992.611340, 23913.957600, 391.017611, 391.017611, 0.000000, X, Y) && !ellipse(25619.173615, 21867.525620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27002.282000, 21879.008000, 1342.520039, 1342.520039, 0.000000, X, Y) && !ellipse(38812.399170, 19461.962875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16051.598700, 13547.463800, 370.122411, 370.122411, 0.000000, X, Y) && !ellipse(23203.519104, 16305.419785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33950.103302, 35723.376129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19324.864000, 36315.132000, 2906.336084, 2906.336084, 0.000000, X, Y) && !ellipse(19726.870000, 35488.066000, 1826.256053, 1826.256053, 0.000000, X, Y) && !ellipse(20008.396000, 34762.238000, 3253.744094, 3253.744094, 0.000000, X, Y) && !ellipse(24684.713000, 33219.023000, 395.772811, 395.772811, 0.000000, X, Y) && !ellipse(20626.382000, 33751.498000, 1626.872047, 1626.872047, 0.000000, X, Y) && !ellipse(23284.899580, 32775.256200, 566.796816, 566.796816, 0.000000, X, Y) && !ellipse(27260.417145, 9809.472443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21287.390000, 32260.954000, 1505.968043, 1505.968043, 0.000000, X, Y) && !ellipse(21677.870239, 31706.550446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21943.276000, 31284.952000, 3143.120090, 3143.120090, 0.000000, X, Y) && !ellipse(17894.940400, 30923.783200, 515.944815, 515.944815, 0.000000, X, Y) && !ellipse(38673.036682, 30257.846985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22304.796000, 30408.200000, 1443.000042, 1443.000042, 0.000000, X, Y) && !ellipse(23213.560425, 29366.216461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23132.999250, 28442.346626, 1258.824036, 919.547268, 86.939825, X, Y) && !ellipse(19162.351800, 28499.833600, 450.037613, 450.037613, 0.000000, X, Y) && !ellipse(23088.723602, 27900.032288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26719.253400, 27531.302200, 270.460008, 270.460008, 0.000000, X, Y) && !ellipse(23729.111359, 27351.054535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13186.856888, 27299.602722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20861.598740, 10432.603836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24080.886000, 26878.704000, 1202.944035, 1202.944035, 0.000000, X, Y) && !ellipse(29312.069400, 26486.539200, 598.102417, 598.102417, 0.000000, X, Y) && !ellipse(23800.008606, 25871.961609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23204.684000, 26071.133000, 483.780814, 483.780814, 0.000000, X, Y) && !ellipse(30150.196167, 10612.198647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33742.153442, 25794.580780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28972.772980, 24986.835907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21936.280258, 24909.293121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22358.016000, 24413.538000, 1271.064037, 1271.064037, 0.000000, X, Y) && !ellipse(36252.850000, 24725.656000, 1740.720050, 1740.720050, 0.000000, X, Y) && !ellipse(27921.362793, 23609.234131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22894.034000, 23847.148000, 616.603218, 616.603218, 0.000000, X, Y) && !ellipse(33230.093800, 23621.836600, 1232.336035, 710.704820, 74.417000, X, Y) && !ellipse(21151.915200, 23382.457400, 428.948812, 288.144808, 26.673200, X, Y) && !ellipse(19366.772680, 23175.182800, 430.996012, 430.996012, 0.000000, X, Y) && !ellipse(22888.831757, 12156.716141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18301.389832, 22300.065735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35889.596893, 21802.146851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27643.495392, 21534.806641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31733.427307, 21304.881104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24088.421783, 21370.355453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27660.875214, 20811.239471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25026.063965, 20425.277863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19345.648697, 20297.447495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29175.888020, 19733.713000, 397.292811, 397.292811, 0.000000, X, Y) && !ellipse(20310.734589, 17969.986420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26138.542480, 17810.245255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29716.728119, 17097.604858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22566.466064, 16574.541519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21281.644287, 15865.623474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18085.424438, 15080.484848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25258.349823, 13551.169388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24638.310211, 13800.386368, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Nov  1 12:59:15 2011] Writing fullrun_pn_xmm0502160101_pi300-10000_pass1_cl_src41.gif
[Tue Nov  1 13:41:00 2011] Mean detx,y = (836.02, -891.73) 
[Tue Nov  1 13:41:10 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Nov  1 13:44:43 2011] Binned source spectrum to 10 counts/bin
[Tue Nov  1 13:44:43 2011] Setting source spectrum file to fullrun_pn_xmm0502160101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue Nov  1 13:44:43 2011] Setting bgd. spectrum file to fullrun_pn_xmm0502160101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Wed Nov  2 04:54:18 2011] Updating aperture counts using extracted products
[Wed Nov  2 04:54:18 2011] Error reading totcts from fullrun_pn_xmm0502160101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Wed Nov  2 04:54:20 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  2 04:54:20 2011] Using photon index=1.80, rate=0.0159, arf fullrun_pn_xmm0502160101_pi300-10000_pass1_cl_src41.arf
[Wed Nov  2 04:54:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov  2 04:54:20 2011] Updating source flux to 3.6e-14
[Wed Nov  2 05:01:03 2011] Flag c found in src. 41 procflags, skipping spectral fitting