[Mon Oct 31 20:39:46 2011] Detection parameters: Position = (276.0, 268.1) = 12 43 44.94 11 32 35.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 505.1 +/- 34.0 Background counts = 137.6 Rate = 0.006 +/- 0.0004 [Mon Oct 31 20:39:48 2011] Off-axis axis estimate = 2.73' [Tue Nov 1 03:17:08 2011] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting [Tue Nov 1 03:17:08 2011] Initial guess for spatial extent in simple fitting = 7.80" [Tue Nov 1 03:17:08 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.761 [Tue Nov 1 03:17:08 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 7.80" [Tue Nov 1 06:34:52 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src11.ximg exists [Tue Nov 1 06:34:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src11.csv [Tue Nov 1 06:34:52 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src11_1.ximg exists [Tue Nov 1 06:34:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src11.csv [Tue Nov 1 06:34:52 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Nov 1 06:34:53 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists [Tue Nov 1 06:34:53 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists [Tue Nov 1 06:34:53 2011] Fit fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly [Tue Nov 1 06:35:19 2011] Warning, spatial fit 11 centroid is now closest to src. 9 [Tue Nov 1 06:35:19 2011] Source 7 is offset by 6.419580 and 2.029264 pixels which is larger than 2 X fitted extent = 0.928998 x 0.928998, not incorporating fit results [Tue Nov 1 06:35:19 2011] Vigneting correction estimate = 1.000000 [Tue Nov 1 06:35:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Nov 1 06:35:19 2011] Assessing source extent using major [Tue Nov 1 06:35:19 2011] Source does appear to be extended [Tue Nov 1 06:35:19 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Nov 1 06:35:19 2011] Source is confused with source 8 [Tue Nov 1 10:45:21 2011] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting [Tue Nov 1 10:45:21 2011] Initial guess for spatial extent in simple fitting = 7.80" [Tue Nov 1 10:45:21 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.761 [Tue Nov 1 10:45:21 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 7.80" [Tue Nov 1 12:58:27 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src10.ximg exists [Tue Nov 1 12:58:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src10.csv [Tue Nov 1 12:58:27 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src10_1.ximg exists [Tue Nov 1 12:58:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src10.csv [Tue Nov 1 12:58:27 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src10_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Nov 1 12:58:28 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists [Tue Nov 1 12:58:28 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists [Tue Nov 1 12:58:28 2011] Fit fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly [Tue Nov 1 12:58:59 2011] Spatial fit model total counts = 3382.010000, observed total counts = 3384.000000 [Tue Nov 1 12:58:59 2011] Offset between fit and detection position for source 7 = 7.509464 pixels [Tue Nov 1 12:58:59 2011] 3475.637000 total counts/ 2897.190000 bgd. counts: snr = 10.746699 Spatial fit parameters: Offset between fit and detection position for source 7 = 7.509464 pixels Position = (269.0, 265.4) = 12 43 47.01 11 32 23.7 Extent = 15.6 (15.6-31.2)", rotation angle = 0 Source counts = 578.4 +/- 59.0 Background counts = 2897.2 Rate = 0.008 +/- 0.0008 [Tue Nov 1 12:58:59 2011] Source 7 is offset by 0.046345 and -3.314046 pixels which is larger than 2 X fitted extent = 1.446786 x 1.446786, not incorporating fit results [Tue Nov 1 12:58:59 2011] Vigneting correction estimate = 1.000000 [Tue Nov 1 12:58:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Nov 1 12:58:59 2011] Assessing source extent using major axis lower bound [Tue Nov 1 12:58:59 2011] Source does appear to be extended [Tue Nov 1 12:58:59 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Nov 2 02:30:40 2011] XMMSAS src. selection expression = ellipse(23356.998000, 23037.860000, 935.514027, 935.514027, 0.000000, X, Y) [Wed Nov 2 02:30:40 2011] Writing source region out to fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src7_src.reg [Wed Nov 2 02:30:40 2011] Extracting stamp from image fullrun_mos2_xmm0502160101_pi300-10000_cl_sm2.00.img.gz, (215, 212) - (323, 319) [Wed Nov 2 02:30:40 2011] XMMSAS bgd. selection expression = annulus(23356.998000, 23037.860000, 1559.190045, 3118.380090, X, Y) && !ellipse(25423.921400, 23960.480800, 2328.686467, 2328.686467, 0.000000, X, Y) && !ellipse(26417.178280, 20333.537000, 316.506409, 316.506409, 0.000000, X, Y) && !ellipse(24388.118000, 23859.158000, 1658.360048, 1658.360048, 0.000000, X, Y) && !ellipse(23366.198360, 23282.686000, 371.560811, 371.560811, 0.000000, X, Y) && !ellipse(24992.934000, 25217.686000, 1101.480032, 1101.480032, 0.000000, X, Y) && !ellipse(26906.483154, 23178.030823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24193.140000, 22614.738000, 1309.112038, 1309.112038, 0.000000, X, Y) && !ellipse(26603.384000, 24634.624000, 1129.480033, 1129.480033, 0.000000, X, Y) && !ellipse(26259.742000, 22379.998000, 1286.352037, 1286.352037, 0.000000, X, Y) && !ellipse(25644.660000, 25268.200000, 1044.600030, 1044.600030, 0.000000, X, Y) && !ellipse(28008.764000, 25620.602000, 2382.016069, 2382.016069, 0.000000, X, Y) && !ellipse(26529.569885, 21800.821991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20996.025528, 23874.569794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27282.996000, 25021.574000, 1191.008034, 1191.008034, 0.000000, X, Y) && !ellipse(25488.546000, 21402.776000, 1294.024037, 1294.024037, 0.000000, X, Y) && !ellipse(22864.084229, 23838.965851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24643.999939, 21904.034927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24005.586000, 24937.726000, 1183.552034, 1183.552034, 0.000000, X, Y) && !ellipse(22195.182000, 24401.944000, 1274.632037, 1274.632037, 0.000000, X, Y) [Wed Nov 2 02:30:40 2011] Writing fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src7.gif [Wed Nov 2 02:37:46 2011] Mean detx,y = (-2166.88, -180.92) [Wed Nov 2 02:37:47 2011] Setting backscal keywords in source and bgd. spectrum [Wed Nov 2 02:37:54 2011] Binned source spectrum to 10 counts/bin [Wed Nov 2 02:37:54 2011] Setting source spectrum file to fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src7_src_b10.pi.gz [Wed Nov 2 02:37:54 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src7_bgd.pi.gz [Wed Nov 2 04:54:23 2011] Updating aperture counts using extracted products [Wed Nov 2 04:54:23 2011] Error reading totcts from fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src7_src_b10.pi.gz [Wed Nov 2 04:54:24 2011] Calculating source flux in energy range 0.30-8.00 [Wed Nov 2 04:54:24 2011] Using photon index=1.80, rate=0.00758, arf fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src7.arf [Wed Nov 2 04:54:24 2011] Assuming count rate is from the 0.30-10.00 bandpass [Wed Nov 2 04:54:24 2011] Updating source flux to 6.9e-14 [Wed Nov 2 04:56:40 2011] Flag b found in src. 7 procflags, skipping spectral fitting [Wed Nov 2 04:56:40 2011] Flag c found in src. 7 procflags, skipping spectral fitting