[Mon Oct 31 20:39:48 2011] Detection parameters:
  Position = (277.1, 258.1) = 12 43 44.62 11 31 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 294.3 +/- 28.4
  Background counts = 133.3
  Rate = 0.004 +/- 0.0004

[Mon Oct 31 20:39:48 2011] Off-axis axis estimate = 3.31'
[Tue Nov  1 03:17:08 2011] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 03:17:08 2011] Initial guess for spatial extent in simple fitting = 8.08"
[Tue Nov  1 03:17:08 2011] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.719
[Tue Nov  1 03:17:08 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 8.08"
[Tue Nov  1 06:34:52 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src17.ximg exists
[Tue Nov  1 06:34:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src17.csv
[Tue Nov  1 06:34:52 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Nov  1 06:34:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src17.csv
[Tue Nov  1 06:34:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 06:34:53 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Nov  1 06:34:53 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Nov  1 06:34:53 2011] Fit fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Nov  1 06:35:19 2011] Warning, spatial fit 17 centroid is now closest to src. 7
[Tue Nov  1 06:35:19 2011] Spatial fit model total counts = 1701.430000, observed total counts = 1699.000000
[Tue Nov  1 06:35:19 2011] Offset between fit and detection position for source 42 = 2.546672 pixels
[Tue Nov  1 06:35:19 2011] Warning, changing simple spatial fit ID from 17 to 43
[Tue Nov  1 06:35:19 2011] 1727.624000 total counts/ 1496.800000 bgd. counts: snr = 5.966217
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 2.546672 pixels
  Position = (277.9, 260.5) = 12 43 44.38 11 32 2.7
  Extent = 16.4 (16.3-32.7)", rotation angle = 0
  Source counts = 230.8 +/- 41.6
  Background counts = 1496.8
  Rate = 0.003 +/- 0.0005
[Tue Nov  1 06:35:19 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 06:35:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 06:35:19 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 06:35:19 2011] Source does appear to be extended
[Tue Nov  1 06:35:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 06:35:19 2011] Source is confused with source 7
[Tue Nov  1 06:35:19 2011] Source is confused with source 45
[Tue Nov  1 10:45:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 10:45:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov  1 10:45:21 2011] Initial guess for spatial extent in simple fitting = 16.36"
[Tue Nov  1 10:45:21 2011] source mask rpix=3.8, npix_max = 72, mask sum = 72, frac = 0.991
[Tue Nov  1 10:45:21 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 16.36"
[Tue Nov  1 12:58:27 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src16.ximg exists
[Tue Nov  1 12:58:27 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Nov  1 12:58:27 2011] Fit fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src16 appears to have run properly
[Tue Nov  1 12:58:28 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Nov  1 12:58:28 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Nov  1 12:58:28 2011] Fit fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Nov  1 12:58:59 2011] Warning, spatial fit 16 centroid is now closest to src. 45
[Tue Nov  1 12:58:59 2011] Spatial fit model total counts = 1695.940000, observed total counts = 1699.000000
[Tue Nov  1 12:58:59 2011] Offset between fit and detection position for source 42 = 0.720861 pixels
[Tue Nov  1 12:58:59 2011] Warning, changing simple spatial fit ID from 16 to 39
[Tue Nov  1 12:58:59 2011] 1630.680000 total counts/ 1336.790000 bgd. counts: snr = 8.038096
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.720861 pixels
  Position = (278.6, 260.5) = 12 43 44.17 11 32 2.6
  Extent = 16.4 (16.3-32.7)", rotation angle = 0
  Source counts = 293.9 +/- 40.4
  Background counts = 1336.8
  Rate = 0.004 +/- 0.0005
[Tue Nov  1 12:58:59 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 12:58:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 12:58:59 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 12:58:59 2011] Source does appear to be extended
[Tue Nov  1 12:58:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 02:30:40 2011] XMMSAS src. selection expression = ellipse(24193.140000, 22614.738000, 981.834028, 981.834028, 0.000000, X, Y)
[Wed Nov  2 02:30:40 2011] Writing source region out to fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src42_src.reg
[Wed Nov  2 02:30:40 2011] Extracting stamp from image fullrun_mos2_xmm0502160101_pi300-10000_cl_sm2.00.img.gz, (222, 204) - (335, 317)
[Wed Nov  2 02:30:40 2011] XMMSAS bgd. selection expression = annulus(24193.140000, 22614.738000, 1636.390047, 3272.780094, X, Y) && !ellipse(25423.921400, 23960.480800, 2328.686467, 2328.686467, 0.000000, X, Y) && !ellipse(26417.178280, 20333.537000, 316.506409, 316.506409, 0.000000, X, Y) && !ellipse(24388.118000, 23859.158000, 1658.360048, 1658.360048, 0.000000, X, Y) && !ellipse(23366.198360, 23282.686000, 371.560811, 371.560811, 0.000000, X, Y) && !ellipse(23356.998000, 23037.860000, 1247.352036, 1247.352036, 0.000000, X, Y) && !ellipse(24992.934000, 25217.686000, 1101.480032, 1101.480032, 0.000000, X, Y) && !ellipse(26906.483154, 23178.030823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27372.759320, 23343.760600, 325.319209, 325.319209, 0.000000, X, Y) && !ellipse(27559.083000, 20204.599200, 309.816809, 309.816809, 0.000000, X, Y) && !ellipse(27749.253200, 22268.060600, 381.132811, 381.132811, 0.000000, X, Y) && !ellipse(26603.384000, 24634.624000, 1129.480033, 1129.480033, 0.000000, X, Y) && !ellipse(26259.742000, 22379.998000, 1286.352037, 1286.352037, 0.000000, X, Y) && !ellipse(25644.660000, 25268.200000, 1044.600030, 1044.600030, 0.000000, X, Y) && !ellipse(28008.764000, 25620.602000, 2382.016069, 2382.016069, 0.000000, X, Y) && !ellipse(26529.569885, 21800.821991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20996.025528, 23874.569794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27282.996000, 25021.574000, 1191.008034, 1191.008034, 0.000000, X, Y) && !ellipse(25488.546000, 21402.776000, 1294.024037, 1294.024037, 0.000000, X, Y) && !ellipse(27873.481995, 24465.263367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22864.084229, 23838.965851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24643.999939, 21904.034927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24005.586000, 24937.726000, 1183.552034, 1183.552034, 0.000000, X, Y) && !ellipse(22195.182000, 24401.944000, 1274.632037, 1274.632037, 0.000000, X, Y)
[Wed Nov  2 02:30:40 2011] Writing fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src42.gif
[Wed Nov  2 02:39:03 2011] Mean detx,y = (-1617.18, 478.72) 
[Wed Nov  2 02:39:03 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov  2 02:39:10 2011] Binned source spectrum to 10 counts/bin
[Wed Nov  2 02:39:11 2011] Setting source spectrum file to fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Wed Nov  2 02:39:11 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Wed Nov  2 04:54:23 2011] Updating aperture counts using extracted products
[Wed Nov  2 04:54:23 2011] Error reading totcts from fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Wed Nov  2 04:54:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  2 04:54:24 2011] Using photon index=1.80, rate=0.00385, arf fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src42.arf
[Wed Nov  2 04:54:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov  2 04:54:24 2011] Updating source flux to 3.5e-14
[Wed Nov  2 04:56:40 2011] Flag c found in src. 42 procflags, skipping spectral fitting