[Mon Oct 31 20:39:47 2011] Detection parameters:
  Position = (326.8, 277.8) = 12 43 29.92 11 33 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.1 +/- 20.2
  Background counts = 119.6
  Rate = 0.002 +/- 0.0003

[Mon Oct 31 20:39:48 2011] Off-axis axis estimate = 2.54'
[Tue Nov  1 03:17:08 2011] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 03:17:08 2011] Initial guess for spatial extent in simple fitting = 7.70"
[Tue Nov  1 03:17:08 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.970
[Tue Nov  1 03:17:08 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 7.70"
[Tue Nov  1 06:34:52 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src33.ximg exists
[Tue Nov  1 06:34:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src33.csv
[Tue Nov  1 06:34:52 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Nov  1 06:34:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src33.csv
[Tue Nov  1 06:34:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 06:34:53 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Nov  1 06:34:53 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Nov  1 06:34:53 2011] Fit fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Nov  1 06:35:19 2011] Source 34 is offset by 4.768579 and 3.558271 pixels which is larger than
2 X fitted extent = 1.472979 x 1.472979, not incorporating fit results
[Tue Nov  1 06:35:19 2011] Spatial fit model total counts = 892.735000, observed total counts = 891.000000
[Tue Nov  1 06:35:19 2011] Offset between fit and detection position for source 34 = 0.114766 pixels
[Tue Nov  1 06:35:19 2011] 838.628500 total counts/ 798.546000 bgd. counts: snr = 1.418420
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.114766 pixels
  Position = (326.7, 277.8) = 12 43 29.96 11 33 18.0
  Extent = 2.5 (1.9-4.5)", rotation angle = 0
  Source counts = 40.1 +/- 29.0
  Background counts = 798.5
  Rate = 0.0005 +/- 0.0004
  Deleting source due to low Poisson probability