[Mon Oct 31 20:39:47 2011] Detection parameters:
  Position = (272.2, 293.5) = 12 43 46.08 11 34 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.6 +/- 19.3
  Background counts = 128.9
  Rate = 0.001 +/- 0.0003

[Mon Oct 31 20:39:48 2011] Off-axis axis estimate = 1.94'
[Tue Nov  1 03:17:08 2011] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 03:17:08 2011] Initial guess for spatial extent in simple fitting = 7.40"
[Tue Nov  1 03:17:08 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.033
[Tue Nov  1 03:17:08 2011] Giving source the simple spatial ID 46 for pass 0, mean size = 7.40"
[Tue Nov  1 06:34:52 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src46.ximg exists
[Tue Nov  1 06:34:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src46.csv
[Tue Nov  1 06:34:52 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src46_1.ximg exists
[Tue Nov  1 06:34:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src46.csv
[Tue Nov  1 06:34:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 06:34:53 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Tue Nov  1 06:34:53 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Tue Nov  1 06:34:53 2011] Fit fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Tue Nov  1 06:35:19 2011] Spatial fit model total counts = 1422.810000, observed total counts = 1417.000000
[Tue Nov  1 06:35:19 2011] Offset between fit and detection position for source 29 = 7.614492 pixels
[Tue Nov  1 06:35:19 2011] 1424.002000 total counts/ 1135.070000 bgd. counts: snr = 8.575991
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 7.614492 pixels
  Position = (276.5, 287.2) = 12 43 44.81 11 33 58.7
  Extent = 14.8 (14.8-29.6)", rotation angle = 0
  Source counts = 288.9 +/- 37.7
  Background counts = 1135.1
  Rate = 0.004 +/- 0.0005
[Tue Nov  1 06:35:19 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 06:35:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 06:35:19 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 06:35:19 2011] Source does appear to be extended
[Tue Nov  1 06:35:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 10:45:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 10:45:21 2011] Initial guess for spatial extent in simple fitting = 14.79"
[Tue Nov  1 10:45:21 2011] source mask rpix=3.4, npix_max = 60, mask sum = 54, frac = 0.887
[Tue Nov  1 10:45:21 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 14.79"
[Tue Nov  1 12:58:27 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src41.ximg exists
[Tue Nov  1 12:58:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src41.csv
[Tue Nov  1 12:58:27 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src41_1.ximg exists
[Tue Nov  1 12:58:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src41.csv
[Tue Nov  1 12:58:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 12:58:28 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Tue Nov  1 12:58:28 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Tue Nov  1 12:58:28 2011] Fit fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Tue Nov  1 12:58:59 2011] Spatial fit model total counts = 16455.500000, observed total counts = 18480.000000
[Tue Nov  1 12:58:59 2011] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Nov  1 12:58:59 2011] Warning, spatial fit 41 centroid is now closest to src. 9
[Tue Nov  1 12:58:59 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 12:58:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 12:58:59 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 12:58:59 2011] Source does appear to be extended
[Tue Nov  1 12:58:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 12:58:59 2011] Source is confused with source 9
[Wed Nov  2 02:30:40 2011] XMMSAS src. selection expression = ellipse(24005.586000, 24937.726000, 887.664026, 887.664026, 0.000000, X, Y)
[Wed Nov  2 02:30:40 2011] Writing source region out to fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src29_src.reg
[Wed Nov  2 02:30:40 2011] Extracting stamp from image fullrun_mos2_xmm0502160101_pi300-10000_cl_sm2.00.img.gz, (225, 236) - (327, 338)
[Wed Nov  2 02:30:40 2011] XMMSAS bgd. selection expression = annulus(24005.586000, 24937.726000, 1479.440043, 2958.880085, X, Y) && !ellipse(25423.921400, 23960.480800, 2328.686467, 2328.686467, 0.000000, X, Y) && !ellipse(24388.118000, 23859.158000, 1658.360048, 1658.360048, 0.000000, X, Y) && !ellipse(23366.198360, 23282.686000, 371.560811, 371.560811, 0.000000, X, Y) && !ellipse(25896.681840, 26676.425800, 340.165610, 340.165610, 0.000000, X, Y) && !ellipse(23356.998000, 23037.860000, 1247.352036, 1247.352036, 0.000000, X, Y) && !ellipse(24992.934000, 25217.686000, 1101.480032, 1101.480032, 0.000000, X, Y) && !ellipse(26906.483154, 23178.030823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24193.140000, 22614.738000, 1309.112038, 1309.112038, 0.000000, X, Y) && !ellipse(26603.384000, 24634.624000, 1129.480033, 1129.480033, 0.000000, X, Y) && !ellipse(26259.742000, 22379.998000, 1286.352037, 1286.352037, 0.000000, X, Y) && !ellipse(25644.660000, 25268.200000, 1044.600030, 1044.600030, 0.000000, X, Y) && !ellipse(28008.764000, 25620.602000, 2382.016069, 2382.016069, 0.000000, X, Y) && !ellipse(26529.569885, 21800.821991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20996.025528, 23874.569794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27282.996000, 25021.574000, 1191.008034, 1191.008034, 0.000000, X, Y) && !ellipse(25488.546000, 21402.776000, 1294.024037, 1294.024037, 0.000000, X, Y) && !ellipse(22864.084229, 23838.965851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24643.999939, 21904.034927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20410.663254, 27843.241211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22195.182000, 24401.944000, 1274.632037, 1274.632037, 0.000000, X, Y)
[Wed Nov  2 02:30:40 2011] Writing fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src29.gif
[Wed Nov  2 02:44:47 2011] Mean detx,y = (-917.20, -1386.27) 
[Wed Nov  2 02:44:48 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov  2 02:44:55 2011] Binned source spectrum to 10 counts/bin
[Wed Nov  2 02:44:55 2011] Setting source spectrum file to fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Nov  2 02:44:55 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed Nov  2 04:54:24 2011] Updating aperture counts using extracted products
[Wed Nov  2 04:54:24 2011] Error reading totcts from fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Nov  2 04:54:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  2 04:54:24 2011] Using photon index=1.80, rate=0.00378, arf fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src29.arf
[Wed Nov  2 04:54:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov  2 04:54:25 2011] Updating source flux to 3.8e-14
[Wed Nov  2 04:56:40 2011] Flag p found in src. 29 procflags, skipping spectral fitting
[Wed Nov  2 04:56:40 2011] Flag c found in src. 29 procflags, skipping spectral fitting