[Mon Oct 31 20:39:47 2011] Detection parameters:
  Position = (219.3, 342.2) = 12 44 1.73 11 37 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.1 +/- 16.6
  Background counts = 81.7
  Rate = 0.002 +/- 0.0003

[Mon Oct 31 20:39:48 2011] Off-axis axis estimate = 6.55'
[Tue Nov  1 03:17:08 2011] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 03:17:08 2011] Initial guess for spatial extent in simple fitting = 9.71"
[Tue Nov  1 03:17:08 2011] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.905
[Tue Nov  1 03:17:08 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 9.71"
[Tue Nov  1 06:34:52 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src30.ximg exists
[Tue Nov  1 06:34:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src30.csv
[Tue Nov  1 06:34:52 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Nov  1 06:34:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src30.csv
[Tue Nov  1 06:34:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 06:34:53 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Nov  1 06:34:53 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Nov  1 06:34:53 2011] Fit fullrun_mos2_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Nov  1 06:35:19 2011] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 13.187892 pixels away
[Tue Nov  1 06:35:19 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 06:35:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 06:35:19 2011] Assessing source extent using major
[Tue Nov  1 06:35:19 2011] Source does appear to be extended
[Tue Nov  1 06:35:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 10:45:21 2011] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 10:45:21 2011] Initial guess for spatial extent in simple fitting = 9.71"
[Tue Nov  1 10:45:21 2011] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.905
[Tue Nov  1 10:45:21 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 9.71"
[Tue Nov  1 12:58:27 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src28.ximg exists
[Tue Nov  1 12:58:27 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Nov  1 12:58:27 2011] Fit fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_src28 appears to have run properly
[Tue Nov  1 12:58:28 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Nov  1 12:58:28 2011] fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Nov  1 12:58:28 2011] Fit fullrun_mos2_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Nov  1 12:58:59 2011] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 38.153785 pixels away
[Tue Nov  1 12:58:59 2011] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 13.199393 pixels away
[Tue Nov  1 12:58:59 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 12:58:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 12:58:59 2011] Assessing source extent using major
[Tue Nov  1 12:58:59 2011] Source does appear to be extended
[Tue Nov  1 12:58:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 02:30:40 2011] XMMSAS src. selection expression = ellipse(19034.893448, 29723.161255, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Nov  2 02:30:40 2011] Writing source region out to fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src20_src.reg
[Wed Nov  2 02:30:40 2011] Extracting stamp from image fullrun_mos2_xmm0502160101_pi300-10000_cl_sm2.00.img.gz, (182, 305) - (257, 380)
[Wed Nov  2 02:30:40 2011] XMMSAS bgd. selection expression = annulus(19034.893448, 29723.161255, 1087.500000, 2175.000000, X, Y) && !ellipse(20410.663254, 27843.241211, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Nov  2 02:30:40 2011] Writing fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src20.gif
[Wed Nov  2 02:41:38 2011] Mean detx,y = (-3363.19, -8002.43) 
[Wed Nov  2 02:41:39 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov  2 02:41:50 2011] Binned source spectrum to 10 counts/bin
[Wed Nov  2 02:41:50 2011] Setting source spectrum file to fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Nov  2 02:41:50 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Nov  2 04:16:40 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Nov  2 04:16:40 2011] rmf not generated due to insufficient counts
[Wed Nov  2 04:54:23 2011] Updating aperture counts using extracted products
[Wed Nov  2 04:54:23 2011] Error reading totcts from fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Nov  2 04:54:24 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  2 04:54:24 2011] Using photon index=1.80, rate=0.00195, arf fullrun_mos2_xmm0502160101_pi300-10000_pass1_cl_src20.arf
[Wed Nov  2 04:54:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov  2 04:54:24 2011] Updating source flux to 2.7e-14
[Wed Nov  2 04:56:40 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting