[Mon Oct 31 20:39:44 2011] Detection parameters:
  Position = (307.8, 293.0) = 12 43 35.53 11 34 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.9 +/- 27.1
  Background counts = 122.1
  Rate = 0.004 +/- 0.0004

[Mon Oct 31 20:39:45 2011] Off-axis axis estimate = 0.79'
[Tue Nov  1 01:27:58 2011] Using EEF radius (= 6.82 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 01:27:58 2011] Initial guess for spatial extent in simple fitting = 6.82"
[Tue Nov  1 01:27:58 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.935
[Tue Nov  1 01:27:58 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 6.82"
[Tue Nov  1 03:17:06 2011] fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_src17.ximg exists
[Tue Nov  1 03:17:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_src17.csv
[Tue Nov  1 03:17:06 2011] fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Nov  1 03:17:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_src17.csv
[Tue Nov  1 03:17:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 03:17:07 2011] fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Nov  1 03:17:07 2011] fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Nov  1 03:17:07 2011] Fit fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Nov  1 06:35:13 2011] Source 24 is offset by 0.294054 and -6.098955 pixels which is larger than
2 X fitted extent = 1.538828 x 1.538828, not incorporating fit results
[Tue Nov  1 06:35:13 2011] Spatial fit model total counts = 2319.070000, observed total counts = 2313.000000
[Tue Nov  1 06:35:13 2011] Offset between fit and detection position for source 24 = 0.905677 pixels
[Tue Nov  1 06:35:13 2011] Warning, changing simple spatial fit ID from 17 to 20
[Tue Nov  1 06:35:13 2011] 2134.730400 total counts/ 2086.620000 bgd. counts: snr = 1.053216
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.905677 pixels
  Position = (307.3, 293.7) = 12 43 35.69 11 34 27.0
  Extent = 3.6 (1.8-5.6)", rotation angle = 0
  Source counts = 48.1 +/- 46.2
  Background counts = 2086.6
  Rate = 0.0006 +/- 0.0006
  Deleting source due to low Poisson probability