[Mon Oct 31 20:39:44 2011] Detection parameters:
  Position = (194.5, 281.0) = 12 44 9.07 11 33 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 976.7 +/- 40.2
  Background counts = 65.6
  Rate = 0.02 +/- 0.0009

[Mon Oct 31 20:39:45 2011] Off-axis axis estimate = 7.64'
[Tue Nov  1 01:27:58 2011] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 01:27:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov  1 01:27:58 2011] Initial guess for spatial extent in simple fitting = 10.25"
[Tue Nov  1 01:27:58 2011] source mask rpix=2.4, npix_max = 32, mask sum = 23, frac = 0.705
[Tue Nov  1 01:27:58 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 10.25"
[Tue Nov  1 03:17:06 2011] fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_src2.ximg exists
[Tue Nov  1 03:17:06 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_src2.csv
[Tue Nov  1 03:17:06 2011] fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Nov  1 03:17:06 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_src2.csv
[Tue Nov  1 03:17:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 03:17:07 2011] fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Nov  1 03:17:07 2011] fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Nov  1 03:17:07 2011] Fit fullrun_mos1_xmm0502160101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Nov  1 06:35:13 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.687089 pixels away
[Tue Nov  1 06:35:13 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 06:35:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 06:35:13 2011] Assessing source extent using major
[Tue Nov  1 06:35:13 2011] Source does appear to be extended
[Tue Nov  1 06:35:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 09:43:33 2011] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 09:43:33 2011] Initial guess for spatial extent in simple fitting = 10.25"
[Tue Nov  1 09:43:33 2011] source mask rpix=2.4, npix_max = 32, mask sum = 23, frac = 0.705
[Tue Nov  1 09:43:33 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 10.25"
[Tue Nov  1 10:45:20 2011] fullrun_mos1_xmm0502160101_pi300-10000_cl_pass1_src2.ximg exists
[Tue Nov  1 10:45:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502160101_pi300-10000_cl_pass1_src2.csv
[Tue Nov  1 10:45:20 2011] fullrun_mos1_xmm0502160101_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Nov  1 10:45:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502160101_pi300-10000_cl_pass1_src2.csv
[Tue Nov  1 10:45:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502160101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502160101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 10:45:21 2011] fullrun_mos1_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Nov  1 10:45:21 2011] fullrun_mos1_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Nov  1 10:45:21 2011] Fit fullrun_mos1_xmm0502160101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Nov  1 12:58:52 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.687089 pixels away
[Tue Nov  1 12:58:52 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 12:58:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 12:58:52 2011] Assessing source extent using major
[Tue Nov  1 12:58:52 2011] Source does appear to be extended
[Tue Nov  1 12:58:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov  2 00:50:10 2011] XMMSAS src. selection expression = ellipse(16872.948227, 24402.575470, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Nov  2 00:50:10 2011] Writing source region out to fullrun_mos1_xmm0502160101_pi300-10000_pass1_cl_src2_src.reg
[Wed Nov  2 00:50:10 2011] Extracting stamp from image fullrun_mos1_xmm0502160101_pi300-10000_cl_sm2.00.img.gz, (157, 244) - (232, 319)
[Wed Nov  2 00:50:10 2011] XMMSAS bgd. selection expression = annulus(16872.948227, 24402.575470, 1087.500000, 2175.000000, X, Y) && !ellipse(17468.723415, 26672.039995, 480.600408, 354.824280, 326.483155, X, Y)
[Wed Nov  2 00:50:10 2011] Writing fullrun_mos1_xmm0502160101_pi300-10000_pass1_cl_src2.gif
[Wed Nov  2 00:56:18 2011] Mean detx,y = (-4041.74, 7409.14) 
[Wed Nov  2 00:56:19 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov  2 00:56:33 2011] Binned source spectrum to 10 counts/bin
[Wed Nov  2 00:56:33 2011] Setting source spectrum file to fullrun_mos1_xmm0502160101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Nov  2 00:56:33 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0502160101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Nov  2 01:31:41 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Nov  2 01:31:41 2011] rmf not generated due to insufficient counts
[Wed Nov  2 04:54:22 2011] Updating aperture counts using extracted products
[Wed Nov  2 04:54:22 2011] Error reading totcts from fullrun_mos1_xmm0502160101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Nov  2 04:54:22 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov  2 04:54:22 2011] Using photon index=1.80, rate=0.0223, arf fullrun_mos1_xmm0502160101_pi300-10000_pass1_cl_src2.arf
[Wed Nov  2 04:54:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov  2 04:54:22 2011] Updating source flux to 3e-13
[Wed Nov  2 04:54:26 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting