[Thu Jul  5 07:09:39 2012] Detection parameters:
  Position = (432.4, 316.0) = 16 34 48.67 -47 32 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.3 +/- 25.9
  Background counts = 243.5
  Rate = 0.002 +/- 0.0003

[Thu Jul  5 07:09:39 2012] Off-axis axis estimate = 9.80'
[Thu Jul  5 07:14:53 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 07:14:53 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Thu Jul  5 07:14:53 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.934
[Thu Jul  5 07:14:53 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 11.33"
[Thu Jul  5 13:36:09 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src66.ximg exists
[Thu Jul  5 13:36:09 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src66_1.ximg exists
[Thu Jul  5 13:36:09 2012] Fit fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src66 appears to have run properly
[Thu Jul  5 13:36:11 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Thu Jul  5 13:36:11 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Thu Jul  5 13:36:11 2012] Fit fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly
[Thu Jul  5 17:04:12 2012] Source 67 is offset by -1.686289 and 8.646780 pixels which is larger than
2 X fitted extent = 1.288455 x 1.288455, not incorporating fit results
[Thu Jul  5 17:04:12 2012] Spatial fit model total counts = 3333.410000, observed total counts = 3038.000000
[Thu Jul  5 17:04:12 2012] Offset between fit and detection position for source 67 = 1.121840 pixels
[Thu Jul  5 17:04:12 2012] 3264.678000 total counts/ 3138.380000 bgd. counts: snr = 2.254466
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 1.121840 pixels
  Position = (431.4, 316.6) = 16 34 49.09 -47 32 33.2
  Extent = 8.6 (4.6-20.9)", rotation angle = 0
  Source counts = 126.3 +/- 57.1
  Background counts = 3138.4
  Rate = 0.002 +/- 0.0008
[Thu Jul  5 17:04:12 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 17:04:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 17:04:12 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 17:04:12 2012] Source does appear to be extended
[Thu Jul  5 17:04:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 17:04:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  5 17:04:38 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Thu Jul  5 17:04:38 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.019
[Thu Jul  5 17:04:38 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 8.60"
[Fri Jul  6 01:28:58 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src57.ximg exists
[Fri Jul  6 01:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src57.csv
[Fri Jul  6 01:28:58 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src57_1.ximg exists
[Fri Jul  6 01:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src57.csv
[Fri Jul  6 01:28:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 01:29:00 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Fri Jul  6 01:29:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src57.csv
[Fri Jul  6 01:29:00 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Fri Jul  6 01:29:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src57.csv
[Fri Jul  6 01:29:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 04:35:19 2012] Spatial fit model total counts = 1932.980000, observed total counts = 1740.000000
[Fri Jul  6 04:35:19 2012] Poor agreement between spatial fit and data for source 67
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul  6 04:35:19 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:35:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:35:19 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 04:35:19 2012] Source does appear to be extended
[Fri Jul  6 04:35:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 04:35:47 2012] XMMSAS src. selection expression = ellipse(37484.847880, 27492.597440, 515.984415, 515.984415, 0.000000, X, Y)
[Fri Jul  6 04:35:47 2012] Writing source region out to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src67_src.reg
[Fri Jul  6 04:35:47 2012] Extracting stamp from image fullrun_pn_xmm0502140101_pi300-10000_cl_sm2.00.img.gz, (402, 287) - (461, 346)
[Fri Jul  6 04:35:47 2012] XMMSAS bgd. selection expression = annulus(37484.847880, 27492.597440, 859.974025, 1719.948049, X, Y) && !ellipse(36325.557000, 31253.327780, 2616.880075, 367.147211, 32.841000, X, Y) && !ellipse(37035.494263, 25321.329773, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 04:35:47 2012] Writing fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src67.gif
[Fri Jul  6 06:18:21 2012] Mean detx,y = (-12544.71, 2996.32) 
[Fri Jul  6 06:18:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 06:18:39 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 06:18:39 2012] Setting source spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Fri Jul  6 06:18:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Fri Jul  6 10:03:47 2012] Updating aperture counts using extracted products
[Fri Jul  6 10:03:47 2012] Error reading totcts from fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Fri Jul  6 10:03:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 10:03:49 2012] Using photon index=1.80, rate=0.00175, arf fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src67.arf
[Fri Jul  6 10:03:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 10:03:49 2012] Updating source flux to 1.2e-14
[Fri Jul  6 10:12:45 2012] Flag b found in src. 67 procflags, skipping spectral fitting
[Fri Jul  6 10:12:45 2012] Flag p found in src. 67 procflags, skipping spectral fitting