[Thu Jul  5 07:09:38 2012] Detection parameters:
  Position = (489.1, 359.1) = 16 34 24.39 -47 29 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.1 +/- 31.0
  Background counts = 221.4
  Rate = 0.002 +/- 0.0003

[Thu Jul  5 07:09:39 2012] Off-axis axis estimate = 14.51'
[Thu Jul  5 07:14:53 2012] Using EEF radius (= 13.68 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 07:14:53 2012] Initial guess for spatial extent in simple fitting = 13.68"
[Thu Jul  5 07:14:53 2012] source mask rpix=3.1, npix_max = 53, mask sum = 64, frac = 1.204
[Thu Jul  5 07:14:53 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 13.68"
[Thu Jul  5 13:36:09 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src56.ximg exists
[Thu Jul  5 13:36:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src56.csv
[Thu Jul  5 13:36:09 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src56_1.ximg exists
[Thu Jul  5 13:36:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src56.csv
[Thu Jul  5 13:36:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 13:36:11 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Thu Jul  5 13:36:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src56.csv
[Thu Jul  5 13:36:11 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Thu Jul  5 13:36:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src56.csv
[Thu Jul  5 13:36:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 17:04:12 2012] Warning, spatial fit 56 centroid is now closest to src. 57
[Thu Jul  5 17:04:12 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 17:04:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 17:04:12 2012] Assessing source extent using major
[Thu Jul  5 17:04:12 2012] Source does appear to be extended
[Thu Jul  5 17:04:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 17:04:38 2012] Using EEF radius (= 13.68 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 17:04:38 2012] Initial guess for spatial extent in simple fitting = 13.68"
[Thu Jul  5 17:04:38 2012] source mask rpix=3.1, npix_max = 53, mask sum = 64, frac = 1.204
[Thu Jul  5 17:04:38 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 13.68"
[Fri Jul  6 01:28:58 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src49.ximg exists
[Fri Jul  6 01:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src49.csv
[Fri Jul  6 01:28:58 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri Jul  6 01:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src49.csv
[Fri Jul  6 01:28:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 01:28:59 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri Jul  6 01:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Fri Jul  6 01:28:59 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri Jul  6 01:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Fri Jul  6 01:28:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 04:35:19 2012] Source 56 is offset by -6.672762 and -6.952231 pixels which is larger than
2 X fitted extent = 5.167678 x 5.167678, not incorporating fit results
[Fri Jul  6 04:35:19 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:35:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:35:19 2012] Assessing source extent using major
[Fri Jul  6 04:35:19 2012] Source does appear to be extended
[Fri Jul  6 04:35:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 04:35:46 2012] XMMSAS src. selection expression = ellipse(42502.321716, 31194.044830, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul  6 04:35:46 2012] Writing source region out to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src56_src.reg
[Fri Jul  6 04:35:46 2012] Extracting stamp from image fullrun_pn_xmm0502140101_pi300-10000_cl_sm2.00.img.gz, (452, 322) - (527, 397)
[Fri Jul  6 04:35:46 2012] XMMSAS bgd. selection expression = annulus(42502.321716, 31194.044830, 1087.500000, 2175.000000, X, Y) && !ellipse(39790.992080, 33569.457400, 823.752024, 823.752024, 0.000000, X, Y) && !ellipse(40708.192000, 33092.859400, 2144.872062, 304.212809, 6.036000, X, Y) && !ellipse(40273.246000, 33255.058000, 2370.216068, 501.197614, 26.564700, X, Y) && !ellipse(38979.456000, 34701.432000, 2036.232059, 2036.232059, 0.000000, X, Y) && !ellipse(40883.746000, 33977.825200, 992.336029, 992.336029, 0.000000, X, Y) && !ellipse(39517.180000, 32140.652000, 2004.792058, 2004.792058, 0.000000, X, Y) && !ellipse(41044.216000, 31437.788000, 1379.720040, 1379.720040, 0.000000, X, Y) && !ellipse(40003.949200, 32148.149400, 813.536023, 813.536023, 0.000000, X, Y) && !ellipse(42207.491333, 32657.905853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41616.447296, 32483.932404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39613.960000, 31476.025200, 1976.280057, 1976.280057, 0.000000, X, Y) && !ellipse(39488.088196, 32841.347137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40665.034000, 31478.202000, 988.984028, 988.984028, 0.000000, X, Y) && !ellipse(40423.202789, 30428.724670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39684.066528, 30585.788239, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 04:35:46 2012] Writing fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src56.gif
[Fri Jul  6 06:10:01 2012] Mean detx,y = (-17634.87, 6700.85) 
[Fri Jul  6 06:10:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 06:10:14 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 06:10:14 2012] Setting source spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri Jul  6 06:10:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Fri Jul  6 07:38:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul  6 07:38:43 2012] rmf not generated due to insufficient counts
[Fri Jul  6 10:03:46 2012] Updating aperture counts using extracted products
[Fri Jul  6 10:03:46 2012] Error reading totcts from fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri Jul  6 10:03:49 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 10:03:49 2012] Using photon index=1.80, rate=0.00219, arf fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src56.arf
[Fri Jul  6 10:03:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 10:03:49 2012] Updating source flux to 2.1e-14
[Fri Jul  6 10:12:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting