[Thu Jul  5 07:09:38 2012] Detection parameters:
  Position = (183.4, 401.6) = 16 36 35.56 -47 26 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 330.2 +/- 27.1
  Background counts = 184.0
  Rate = 0.004 +/- 0.0003

[Thu Jul  5 07:09:39 2012] Off-axis axis estimate = 11.21'
[Thu Jul  5 07:14:53 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 07:14:53 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Thu Jul  5 07:14:53 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.984
[Thu Jul  5 07:14:53 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 12.03"
[Thu Jul  5 13:36:09 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src50.ximg exists
[Thu Jul  5 13:36:09 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src50_1.ximg exists
[Thu Jul  5 13:36:09 2012] Fit fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src50 appears to have run properly
[Thu Jul  5 13:36:11 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Thu Jul  5 13:36:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src50.csv
[Thu Jul  5 13:36:11 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Thu Jul  5 13:36:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src50.csv
[Thu Jul  5 13:36:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 17:04:12 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 15.123809 pixels away
[Thu Jul  5 17:04:12 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 17:04:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 17:04:12 2012] Assessing source extent using major
[Thu Jul  5 17:04:12 2012] Source does appear to be extended
[Thu Jul  5 17:04:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 17:04:38 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 17:04:38 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Thu Jul  5 17:04:38 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.984
[Thu Jul  5 17:04:38 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 12.03"
[Fri Jul  6 01:28:58 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src43.ximg exists
[Fri Jul  6 01:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src43.csv
[Fri Jul  6 01:28:58 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src43_1.ximg exists
[Fri Jul  6 01:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src43.csv
[Fri Jul  6 01:28:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 01:28:59 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Fri Jul  6 01:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Fri Jul  6 01:28:59 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Fri Jul  6 01:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Fri Jul  6 01:28:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 04:35:19 2012] Spatial fit model total counts = 2716.280000, observed total counts = 2366.000000
[Fri Jul  6 04:35:19 2012] Poor agreement between spatial fit and data for source 50
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul  6 04:35:19 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:35:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:35:19 2012] Assessing source extent using major
[Fri Jul  6 04:35:19 2012] Source does appear to be extended
[Fri Jul  6 04:35:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 04:35:46 2012] XMMSAS src. selection expression = ellipse(15903.505432, 34892.245758, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul  6 04:35:46 2012] Writing source region out to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src50_src.reg
[Fri Jul  6 04:35:46 2012] Extracting stamp from image fullrun_pn_xmm0502140101_pi300-10000_cl_sm2.00.img.gz, (146, 364) - (221, 439)
[Fri Jul  6 04:35:46 2012] XMMSAS bgd. selection expression = annulus(15903.505432, 34892.245758, 1087.500000, 2175.000000, X, Y)
[Fri Jul  6 04:35:46 2012] Writing fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src50.gif
[Fri Jul  6 06:05:39 2012] Mean detx,y = (8986.92, 10476.54) 
[Fri Jul  6 06:05:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 06:06:08 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 06:06:08 2012] Setting source spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri Jul  6 06:06:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Fri Jul  6 07:37:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul  6 07:37:14 2012] rmf not generated due to insufficient counts
[Fri Jul  6 10:03:46 2012] Updating aperture counts using extracted products
[Fri Jul  6 10:03:46 2012] Error reading totcts from fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Fri Jul  6 10:03:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 10:03:48 2012] Using photon index=1.80, rate=0.00372, arf fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src50.arf
[Fri Jul  6 10:03:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 10:03:48 2012] Updating source flux to 2.8e-14
[Fri Jul  6 10:12:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting