[Thu Jul  5 07:09:38 2012] Detection parameters:
  Position = (429.4, 408.0) = 16 34 50.06 -47 25 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.9 +/- 29.2
  Background counts = 206.5
  Rate = 0.002 +/- 0.0003

[Thu Jul  5 07:09:39 2012] Off-axis axis estimate = 12.38'
[Thu Jul  5 07:14:53 2012] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 07:14:53 2012] Initial guess for spatial extent in simple fitting = 12.62"
[Thu Jul  5 07:14:53 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.908
[Thu Jul  5 07:14:53 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 12.62"
[Thu Jul  5 13:36:09 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src49.ximg exists
[Thu Jul  5 13:36:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src49.csv
[Thu Jul  5 13:36:09 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src49_1.ximg exists
[Thu Jul  5 13:36:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src49.csv
[Thu Jul  5 13:36:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 13:36:11 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Thu Jul  5 13:36:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src49.csv
[Thu Jul  5 13:36:11 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Thu Jul  5 13:36:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src49.csv
[Thu Jul  5 13:36:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 17:04:11 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 10.328395 pixels away
[Thu Jul  5 17:04:12 2012] Source 49 is offset by 3.975189 and -7.644887 pixels which is larger than
2 X fitted extent = 4.767448 x 4.767448, not incorporating fit results
[Thu Jul  5 17:04:12 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 17:04:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 17:04:12 2012] Assessing source extent using major
[Thu Jul  5 17:04:12 2012] Source does appear to be extended
[Thu Jul  5 17:04:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 17:04:12 2012] Source is confused with source 23
[Thu Jul  5 17:04:38 2012] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 17:04:38 2012] Initial guess for spatial extent in simple fitting = 12.62"
[Thu Jul  5 17:04:38 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.908
[Thu Jul  5 17:04:38 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 12.62"
[Fri Jul  6 01:28:57 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src42.ximg exists
[Fri Jul  6 01:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src42.csv
[Fri Jul  6 01:28:58 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src42_1.ximg exists
[Fri Jul  6 01:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src42.csv
[Fri Jul  6 01:28:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 01:28:59 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Fri Jul  6 01:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Fri Jul  6 01:28:59 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Fri Jul  6 01:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Fri Jul  6 01:28:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 04:35:18 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 10.530319 pixels away
[Fri Jul  6 04:35:19 2012] Source 49 is offset by 3.468890 and -8.452013 pixels which is larger than
2 X fitted extent = 5.148552 x 5.148552, not incorporating fit results
[Fri Jul  6 04:35:19 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:35:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:35:19 2012] Assessing source extent using major
[Fri Jul  6 04:35:19 2012] Source does appear to be extended
[Fri Jul  6 04:35:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 04:35:46 2012] XMMSAS src. selection expression = ellipse(37313.101471, 35450.194855, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul  6 04:35:46 2012] Writing source region out to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src49_src.reg
[Fri Jul  6 04:35:46 2012] Extracting stamp from image fullrun_pn_xmm0502140101_pi300-10000_cl_sm2.00.img.gz, (392, 371) - (467, 446)
[Fri Jul  6 04:35:46 2012] XMMSAS bgd. selection expression = annulus(37313.101471, 35450.194855, 1087.500000, 2175.000000, X, Y) && !ellipse(39790.992080, 33569.457400, 823.752024, 823.752024, 0.000000, X, Y) && !ellipse(40708.192000, 33092.859400, 2144.872062, 304.212809, 6.036000, X, Y) && !ellipse(37770.369202, 33955.583282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40273.246000, 33255.058000, 2370.216068, 501.197614, 26.564700, X, Y) && !ellipse(39541.687660, 34055.337800, 651.658419, 651.658419, 0.000000, X, Y) && !ellipse(40294.218811, 34746.070465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38979.456000, 34701.432000, 2036.232059, 2036.232059, 0.000000, X, Y) && !ellipse(38739.222000, 35241.580000, 1090.544031, 1090.544031, 0.000000, X, Y) && !ellipse(39939.804260, 35454.081818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38061.876000, 33226.940000, 694.432820, 385.424011, 90.000000, X, Y) && !ellipse(39517.180000, 32140.652000, 2004.792058, 2004.792058, 0.000000, X, Y) && !ellipse(39158.333557, 36210.587280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36214.386000, 35371.686000, 1803.328052, 1803.328052, 0.000000, X, Y) && !ellipse(35502.414200, 34239.556000, 1093.712031, 1093.712031, 0.000000, X, Y) && !ellipse(35812.441742, 34830.691559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35351.956000, 33929.416000, 888.080026, 888.080026, 0.000000, X, Y) && !ellipse(37243.868927, 33097.331787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39613.960000, 31476.025200, 1976.280057, 1976.280057, 0.000000, X, Y) && !ellipse(36325.557000, 31253.327780, 2616.880075, 367.147211, 32.841000, X, Y) && !ellipse(36146.699310, 38159.715973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36765.953033, 37890.628754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36779.844147, 37442.029694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37563.534454, 37531.692688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36131.090393, 36344.496338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38812.555817, 33797.579834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35299.336090, 32817.818268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39488.088196, 32841.347137, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 04:35:46 2012] Writing fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src49.gif
[Fri Jul  6 06:04:54 2012] Mean detx,y = (-12393.24, 10961.84) 
[Fri Jul  6 06:04:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 06:05:10 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 06:05:10 2012] Setting source spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Fri Jul  6 06:05:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Fri Jul  6 07:36:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul  6 07:36:56 2012] rmf not generated due to insufficient counts
[Fri Jul  6 10:03:46 2012] Updating aperture counts using extracted products
[Fri Jul  6 10:03:46 2012] Error reading totcts from fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Fri Jul  6 10:03:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 10:03:48 2012] Using photon index=1.80, rate=0.00162, arf fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src49.arf
[Fri Jul  6 10:03:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 10:03:48 2012] Updating source flux to 1.4e-14
[Fri Jul  6 10:12:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting