[Thu Jul 5 07:09:38 2012] Detection parameters: Position = (446.9, 353.8) = 16 34 42.48 -47 29 50.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1066.5 +/- 50.3 Background counts = 224.8 Rate = 0.01 +/- 0.0006 [Thu Jul 5 07:09:39 2012] Off-axis axis estimate = 11.49' [Thu Jul 5 07:14:53 2012] Using EEF radius (= 12.17 ")to estimate initial spatial extent for simple fitting [Thu Jul 5 07:14:53 2012] Initial guess for spatial extent in simple fitting = 12.17" [Thu Jul 5 07:14:53 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.965 [Thu Jul 5 07:14:53 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 12.17" [Thu Jul 5 13:36:08 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src36.ximg exists [Thu Jul 5 13:36:08 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src36_1.ximg exists [Thu Jul 5 13:36:08 2012] Fit fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src36 appears to have run properly [Thu Jul 5 13:36:10 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists [Thu Jul 5 13:36:10 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists [Thu Jul 5 13:36:10 2012] Fit fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly [Thu Jul 5 17:04:12 2012] Warning, spatial fit 36 centroid is now closest to src. 32 [Thu Jul 5 17:04:12 2012] Spatial fit model total counts = 8329.450000, observed total counts = 8338.000000 [Thu Jul 5 17:04:12 2012] Offset between fit and detection position for source 36 = 4.788405 pixels [Thu Jul 5 17:04:12 2012] Warning, changing simple spatial fit ID from 36 to 61 [Thu Jul 5 17:04:12 2012] 8375.690000 total counts/ 6955.720000 bgd. counts: snr = 17.025823 Spatial fit parameters: Offset between fit and detection position for source 36 = 4.788405 pixels Position = (447.1, 358.6) = 16 34 42.43 -47 29 30.2 Extent = 18.1 (16.3-19.4)", rotation angle = 0 Source counts = 1420.0 +/- 91.5 Background counts = 6955.7 Rate = 0.02 +/- 0.001 [Thu Jul 5 17:04:12 2012] Vigneting correction estimate = 1.000000 [Thu Jul 5 17:04:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jul 5 17:04:12 2012] Assessing source extent using major axis lower bound [Thu Jul 5 17:04:12 2012] Source does appear to be extended [Thu Jul 5 17:04:12 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jul 5 17:04:12 2012] Source is confused with source 20 [Thu Jul 5 17:04:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Jul 5 17:04:38 2012] Initial guess for spatial extent in simple fitting = 18.06" [Thu Jul 5 17:04:38 2012] source mask rpix=4.2, npix_max = 86, mask sum = 90, frac = 1.040 [Thu Jul 5 17:04:38 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 18.06" [Fri Jul 6 01:28:57 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src33.ximg exists [Fri Jul 6 01:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src33.csv [Fri Jul 6 01:28:57 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src33_1.ximg exists [Fri Jul 6 01:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src33.csv [Fri Jul 6 01:28:57 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src33_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jul 6 01:28:59 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists [Fri Jul 6 01:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src33.csv [Fri Jul 6 01:28:59 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists [Fri Jul 6 01:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src33.csv [Fri Jul 6 01:28:59 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jul 6 04:35:19 2012] Warning, spatial fit 33 centroid is now closest to src. 53 [Fri Jul 6 04:35:19 2012] Source 36 is offset by -0.027885 and 4.915025 pixels which is larger than 2 X fitted extent = 2.125421 x 2.125421, not incorporating fit results [Fri Jul 6 04:35:19 2012] Vigneting correction estimate = 1.000000 [Fri Jul 6 04:35:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jul 6 04:35:19 2012] Assessing source extent using major axis lower bound [Fri Jul 6 04:35:19 2012] Source does appear to be extended [Fri Jul 6 04:35:19 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jul 6 04:35:46 2012] Counts = 1419.970000, rescaling region sizes by 2.000000 [Fri Jul 6 04:35:46 2012] XMMSAS src. selection expression = ellipse(38846.796000, 31147.332000, 2166.732062, 2166.732062, 0.000000, X, Y) [Fri Jul 6 04:35:46 2012] Writing source region out to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src36_src.reg [Fri Jul 6 04:35:46 2012] Extracting stamp from image fullrun_pn_xmm0502140101_pi300-10000_cl_sm2.00.img.gz, (323, 234) - (572, 483) [Fri Jul 6 04:35:46 2012] XMMSAS bgd. selection expression = annulus(38846.796000, 31147.332000, 7222.440208, 14444.880416, X, Y) && !ellipse(39790.992080, 33569.457400, 823.752024, 823.752024, 0.000000, X, Y) && !ellipse(40708.192000, 33092.859400, 2144.872062, 304.212809, 6.036000, X, Y) && !ellipse(37770.369202, 33955.583282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40273.246000, 33255.058000, 2370.216068, 501.197614, 26.564700, X, Y) && !ellipse(39541.687660, 34055.337800, 651.658419, 651.658419, 0.000000, X, Y) && !ellipse(40633.550000, 34029.200000, 496.166414, 496.166414, 0.000000, X, Y) && !ellipse(40294.218811, 34746.070465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38979.456000, 34701.432000, 2036.232059, 2036.232059, 0.000000, X, Y) && !ellipse(38739.222000, 35241.580000, 1090.544031, 1090.544031, 0.000000, X, Y) && !ellipse(40883.746000, 33977.825200, 992.336029, 992.336029, 0.000000, X, Y) && !ellipse(39939.804260, 35454.081818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38061.876000, 33226.940000, 694.432820, 385.424011, 90.000000, X, Y) && !ellipse(39517.180000, 32140.652000, 2004.792058, 2004.792058, 0.000000, X, Y) && !ellipse(41044.216000, 31437.788000, 1379.720040, 1379.720040, 0.000000, X, Y) && !ellipse(40003.949200, 32148.149400, 813.536023, 813.536023, 0.000000, X, Y) && !ellipse(37456.876000, 32199.422000, 763.038422, 763.038422, 0.000000, X, Y) && !ellipse(38338.202972, 31459.332703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39158.333557, 36210.587280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36214.386000, 35371.686000, 1803.328052, 1803.328052, 0.000000, X, Y) && !ellipse(35502.414200, 34239.556000, 1093.712031, 1093.712031, 0.000000, X, Y) && !ellipse(35812.441742, 34830.691559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35351.956000, 33929.416000, 888.080026, 888.080026, 0.000000, X, Y) && !ellipse(37243.868927, 33097.331787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42207.491333, 32657.905853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35346.244840, 32370.007400, 476.224814, 476.224814, 0.000000, X, Y) && !ellipse(41616.447296, 32483.932404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36099.908000, 31352.440000, 1509.592043, 1509.592043, 0.000000, X, Y) && !ellipse(39613.960000, 31476.025200, 1976.280057, 1976.280057, 0.000000, X, Y) && !ellipse(36325.557000, 31253.327780, 2616.880075, 367.147211, 32.841000, X, Y) && !ellipse(38186.003418, 30681.610901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36578.484000, 31049.338000, 1779.320051, 256.080807, 25.917800, X, Y) && !ellipse(35423.426849, 38572.466827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36146.699310, 38159.715973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36765.953033, 37890.628754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36779.844147, 37442.029694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37563.534454, 37531.692688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36131.090393, 36344.496338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37313.101471, 35450.194855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38812.555817, 33797.579834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35299.336090, 32817.818268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39488.088196, 32841.347137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31141.015930, 32332.555908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42502.321716, 31194.044830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36193.393311, 30517.705322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40665.034000, 31478.202000, 988.984028, 988.984028, 0.000000, X, Y) && !ellipse(40423.202789, 30428.724670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39684.066528, 30585.788239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28705.493835, 28922.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31576.021240, 28008.553955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37484.847880, 27492.597440, 687.979220, 687.979220, 0.000000, X, Y) && !ellipse(37035.494263, 25321.329773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27963.845917, 24408.363434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24761.350580, 24127.371220, 357.633990, 357.633990, 0.000000, X, Y) && !ellipse(25572.360138, 22973.033356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36416.144958, 23046.458191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25783.936040, 21620.773200, 855.872025, 855.872025, 0.000000, X, Y) && !ellipse(30018.631500, 20944.225906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28349.807526, 19117.957367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.230988, 18882.296967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36279.389709, 16971.465744, 870.000000, 870.000000, 0.000000, X, Y) [Fri Jul 6 04:35:46 2012] Writing fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src36.gif [Fri Jul 6 05:54:42 2012] Mean detx,y = (-14079.69, 6973.20) [Fri Jul 6 05:54:51 2012] Setting backscal keywords in source and bgd. spectrum [Fri Jul 6 05:58:18 2012] Binned source spectrum to 10 counts/bin [Fri Jul 6 05:58:18 2012] Setting source spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src36_src_b10.pi.gz [Fri Jul 6 05:58:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src36_bgd.pi.gz [Fri Jul 6 10:03:46 2012] Updating aperture counts using extracted products [Fri Jul 6 10:03:46 2012] Error reading totcts from fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src36_src_b10.pi.gz [Fri Jul 6 10:03:48 2012] Calculating source flux in energy range 0.30-8.00 [Fri Jul 6 10:03:48 2012] Using photon index=1.80, rate=0.0196, arf fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src36.arf [Fri Jul 6 10:03:48 2012] Assuming count rate is from the 0.30-10.00 bandpass [Fri Jul 6 10:03:48 2012] Updating source flux to 1.3e-13 [Fri Jul 6 10:12:45 2012] Flag b found in src. 36 procflags, skipping spectral fitting [Fri Jul 6 10:12:45 2012] Flag c found in src. 36 procflags, skipping spectral fitting