[Thu Jul 5 07:09:38 2012] Detection parameters: Position = (449.8, 359.9) = 16 34 41.25 -47 29 22.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1550.9 +/- 57.6 Background counts = 220.3 Rate = 0.02 +/- 0.0006 [Thu Jul 5 07:09:39 2012] Off-axis axis estimate = 11.85' [Thu Jul 5 07:14:53 2012] Using EEF radius (= 12.35 ")to estimate initial spatial extent for simple fitting [Thu Jul 5 07:14:53 2012] Initial guess for spatial extent in simple fitting = 12.35" [Thu Jul 5 07:14:53 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.942 [Thu Jul 5 07:14:53 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 12.35" [Thu Jul 5 13:36:08 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src32.ximg exists [Thu Jul 5 13:36:08 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src32_1.ximg exists [Thu Jul 5 13:36:08 2012] Fit fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src32 appears to have run properly [Thu Jul 5 13:36:10 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists [Thu Jul 5 13:36:10 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists [Thu Jul 5 13:36:10 2012] Fit fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly [Thu Jul 5 17:04:12 2012] Spatial fit model total counts = 6483.020000, observed total counts = 6478.000000 [Thu Jul 5 17:04:12 2012] Offset between fit and detection position for source 32 = 6.532922 pixels [Thu Jul 5 17:04:12 2012] 5882.230000 total counts/ 1917.870000 bgd. counts: snr = 90.523951 Spatial fit parameters: Offset between fit and detection position for source 32 = 6.532922 pixels Position = (455.9, 362.4) = 16 34 38.65 -47 29 13.6 Extent = 24.7 (24.5-49.4)", rotation angle = 0 Source counts = 3964.4 +/- 76.7 Background counts = 1917.9 Rate = 0.05 +/- 0.001 [Thu Jul 5 17:04:12 2012] Source 32 is offset by -1.803448 and -3.342929 pixels which is larger than 2 X fitted extent = 1.399228 x 1.399228, not incorporating fit results [Thu Jul 5 17:04:12 2012] Vigneting correction estimate = 1.000000 [Thu Jul 5 17:04:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jul 5 17:04:12 2012] Assessing source extent using major axis lower bound [Thu Jul 5 17:04:12 2012] Source does appear to be extended [Thu Jul 5 17:04:12 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jul 5 17:04:12 2012] Source is confused with source 17 [Thu Jul 5 17:04:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Jul 5 17:04:38 2012] Initial guess for spatial extent in simple fitting = 24.70" [Thu Jul 5 17:04:38 2012] source mask rpix=5.7, npix_max = 152, mask sum = 156, frac = 1.021 [Thu Jul 5 17:04:38 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 24.70" [Fri Jul 6 01:28:57 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src29.ximg exists [Fri Jul 6 01:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src29.csv [Fri Jul 6 01:28:57 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src29_1.ximg exists [Fri Jul 6 01:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src29.csv [Fri Jul 6 01:28:57 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jul 6 01:28:59 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists [Fri Jul 6 01:28:59 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists [Fri Jul 6 01:28:59 2012] Fit fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly [Fri Jul 6 04:35:19 2012] Warning, spatial fit 29 centroid is now closest to src. 16 [Fri Jul 6 04:35:19 2012] Source 32 is offset by 1.298069 and 2.692703 pixels which is larger than 2 X fitted extent = 3.387655 x 1.466575, not incorporating fit results [Fri Jul 6 04:35:19 2012] Vigneting correction estimate = 1.000000 [Fri Jul 6 04:35:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jul 6 04:35:19 2012] Assessing source extent using major axis lower bound [Fri Jul 6 04:35:19 2012] Source does appear to be extended [Fri Jul 6 04:35:19 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jul 6 04:35:46 2012] Counts = 3964.360000, rescaling region sizes by 2.000000 [Fri Jul 6 04:35:46 2012] XMMSAS src. selection expression = ellipse(39613.960000, 31476.025200, 2964.420085, 2964.420085, 0.000000, X, Y) [Fri Jul 6 04:35:46 2012] Writing source region out to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src32_src.reg [Fri Jul 6 04:35:46 2012] Extracting stamp from image fullrun_pn_xmm0502140101_pi300-10000_cl_sm2.00.img.gz, (286, 192) - (595, 533) [Fri Jul 6 04:35:46 2012] XMMSAS bgd. selection expression = annulus(39613.960000, 31476.025200, 9881.400284, 19762.800569, X, Y) && !ellipse(39790.992080, 33569.457400, 823.752024, 823.752024, 0.000000, X, Y) && !ellipse(40708.192000, 33092.859400, 2144.872062, 304.212809, 6.036000, X, Y) && !ellipse(37770.369202, 33955.583282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40273.246000, 33255.058000, 2370.216068, 501.197614, 26.564700, X, Y) && !ellipse(39541.687660, 34055.337800, 651.658419, 651.658419, 0.000000, X, Y) && !ellipse(40633.550000, 34029.200000, 496.166414, 496.166414, 0.000000, X, Y) && !ellipse(40294.218811, 34746.070465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38979.456000, 34701.432000, 2036.232059, 2036.232059, 0.000000, X, Y) && !ellipse(38739.222000, 35241.580000, 1090.544031, 1090.544031, 0.000000, X, Y) && !ellipse(40883.746000, 33977.825200, 992.336029, 992.336029, 0.000000, X, Y) && !ellipse(39939.804260, 35454.081818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38061.876000, 33226.940000, 694.432820, 385.424011, 90.000000, X, Y) && !ellipse(39517.180000, 32140.652000, 2004.792058, 2004.792058, 0.000000, X, Y) && !ellipse(41044.216000, 31437.788000, 1379.720040, 1379.720040, 0.000000, X, Y) && !ellipse(40003.949200, 32148.149400, 813.536023, 813.536023, 0.000000, X, Y) && !ellipse(37456.876000, 32199.422000, 763.038422, 763.038422, 0.000000, X, Y) && !ellipse(38338.202972, 31459.332703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39158.333557, 36210.587280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36214.386000, 35371.686000, 1803.328052, 1803.328052, 0.000000, X, Y) && !ellipse(35502.414200, 34239.556000, 1093.712031, 1093.712031, 0.000000, X, Y) && !ellipse(35812.441742, 34830.691559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35351.956000, 33929.416000, 888.080026, 888.080026, 0.000000, X, Y) && !ellipse(37243.868927, 33097.331787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42207.491333, 32657.905853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35346.244840, 32370.007400, 476.224814, 476.224814, 0.000000, X, Y) && !ellipse(41616.447296, 32483.932404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36099.908000, 31352.440000, 1509.592043, 1509.592043, 0.000000, X, Y) && !ellipse(36325.557000, 31253.327780, 2616.880075, 367.147211, 32.841000, X, Y) && !ellipse(38186.003418, 30681.610901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36578.484000, 31049.338000, 1779.320051, 256.080807, 25.917800, X, Y) && !ellipse(38846.796000, 31147.332000, 1444.488042, 1444.488042, 0.000000, X, Y) && !ellipse(35423.426849, 38572.466827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36146.699310, 38159.715973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36765.953033, 37890.628754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36779.844147, 37442.029694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37563.534454, 37531.692688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36131.090393, 36344.496338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37313.101471, 35450.194855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38812.555817, 33797.579834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35299.336090, 32817.818268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39488.088196, 32841.347137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31141.015930, 32332.555908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42502.321716, 31194.044830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36193.393311, 30517.705322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40665.034000, 31478.202000, 988.984028, 988.984028, 0.000000, X, Y) && !ellipse(40423.202789, 30428.724670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39684.066528, 30585.788239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28705.493835, 28922.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31576.021240, 28008.553955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37484.847880, 27492.597440, 687.979220, 687.979220, 0.000000, X, Y) && !ellipse(19558.591339, 27089.709381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37035.494263, 25321.329773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27963.845917, 24408.363434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24761.350580, 24127.371220, 357.633990, 357.633990, 0.000000, X, Y) && !ellipse(25572.360138, 22973.033356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36416.144958, 23046.458191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25783.936040, 21620.773200, 855.872025, 855.872025, 0.000000, X, Y) && !ellipse(30018.631500, 20944.225906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28349.807526, 19117.957367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.230988, 18882.296967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36279.389709, 16971.465744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.721313, 14045.195999, 870.000000, 870.000000, 0.000000, X, Y) [Fri Jul 6 04:35:46 2012] Writing fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src32.gif [Fri Jul 6 05:39:06 2012] Mean detx,y = (-14977.60, 7673.38) [Fri Jul 6 05:39:18 2012] Setting backscal keywords in source and bgd. spectrum [Fri Jul 6 05:43:48 2012] Binned source spectrum to 10 counts/bin [Fri Jul 6 05:43:49 2012] Setting source spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src32_src_b10.pi.gz [Fri Jul 6 05:43:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src32_bgd.pi.gz [Fri Jul 6 10:03:46 2012] Updating aperture counts using extracted products [Fri Jul 6 10:03:46 2012] Error reading totcts from fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src32_src_b10.pi.gz [Fri Jul 6 10:03:48 2012] Calculating source flux in energy range 0.30-8.00 [Fri Jul 6 10:03:48 2012] Using photon index=1.80, rate=0.0549, arf fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src32.arf [Fri Jul 6 10:03:48 2012] Assuming count rate is from the 0.30-10.00 bandpass [Fri Jul 6 10:03:48 2012] Updating source flux to 3.5e-13 [Fri Jul 6 10:12:45 2012] Flag b found in src. 32 procflags, skipping spectral fitting [Fri Jul 6 10:12:45 2012] Flag c found in src. 32 procflags, skipping spectral fitting