[Thu Jul  5 07:09:38 2012] Detection parameters:
  Position = (478.9, 373.9) = 16 34 28.79 -47 28 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 695.2 +/- 47.8
  Background counts = 186.6
  Rate = 0.008 +/- 0.0005

[Thu Jul  5 07:09:39 2012] Off-axis axis estimate = 14.18'
[Thu Jul  5 07:14:53 2012] Using EEF radius (= 13.52 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 07:14:53 2012] Initial guess for spatial extent in simple fitting = 13.52"
[Thu Jul  5 07:14:53 2012] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.229
[Thu Jul  5 07:14:53 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 13.52"
[Thu Jul  5 13:36:08 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src30.ximg exists
[Thu Jul  5 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src30.csv
[Thu Jul  5 13:36:08 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Jul  5 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src30.csv
[Thu Jul  5 13:36:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 13:36:10 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Jul  5 13:36:10 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Jul  5 13:36:10 2012] Fit fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Thu Jul  5 17:04:11 2012] Warning, spatial fit 30 centroid is now closest to src. 11
[Thu Jul  5 17:04:12 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 17:04:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 17:04:12 2012] Assessing source extent using major
[Thu Jul  5 17:04:12 2012] Source does appear to be extended
[Thu Jul  5 17:04:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 17:04:12 2012] Source is confused with source 28
[Thu Jul  5 17:04:38 2012] Using EEF radius (= 13.52 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 17:04:38 2012] Initial guess for spatial extent in simple fitting = 13.52"
[Thu Jul  5 17:04:38 2012] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.229
[Thu Jul  5 17:04:38 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 13.52"
[Fri Jul  6 01:28:57 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src27.ximg exists
[Fri Jul  6 01:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src27.csv
[Fri Jul  6 01:28:57 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Jul  6 01:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src27.csv
[Fri Jul  6 01:28:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 01:28:59 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Jul  6 01:28:59 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Jul  6 01:28:59 2012] Fit fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Jul  6 04:35:19 2012] Source 30 is offset by 5.053049 and -7.135559 pixels which is larger than
2 X fitted extent = 5.543311 x 5.543311, not incorporating fit results
[Fri Jul  6 04:35:19 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:35:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:35:19 2012] Assessing source extent using major
[Fri Jul  6 04:35:19 2012] Source does appear to be extended
[Fri Jul  6 04:35:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 04:35:45 2012] XMMSAS src. selection expression = ellipse(41616.447296, 32483.932404, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul  6 04:35:45 2012] Writing source region out to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src30_src.reg
[Fri Jul  6 04:35:45 2012] Extracting stamp from image fullrun_pn_xmm0502140101_pi300-10000_cl_sm2.00.img.gz, (441, 336) - (516, 411)
[Fri Jul  6 04:35:45 2012] XMMSAS bgd. selection expression = annulus(41616.447296, 32483.932404, 1087.500000, 2175.000000, X, Y) && !ellipse(39790.992080, 33569.457400, 823.752024, 823.752024, 0.000000, X, Y) && !ellipse(40708.192000, 33092.859400, 2144.872062, 304.212809, 6.036000, X, Y) && !ellipse(40273.246000, 33255.058000, 2370.216068, 501.197614, 26.564700, X, Y) && !ellipse(39541.687660, 34055.337800, 651.658419, 651.658419, 0.000000, X, Y) && !ellipse(40633.550000, 34029.200000, 496.166414, 496.166414, 0.000000, X, Y) && !ellipse(40294.218811, 34746.070465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38979.456000, 34701.432000, 2036.232059, 2036.232059, 0.000000, X, Y) && !ellipse(38739.222000, 35241.580000, 1090.544031, 1090.544031, 0.000000, X, Y) && !ellipse(40883.746000, 33977.825200, 992.336029, 992.336029, 0.000000, X, Y) && !ellipse(39939.804260, 35454.081818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39517.180000, 32140.652000, 2004.792058, 2004.792058, 0.000000, X, Y) && !ellipse(41044.216000, 31437.788000, 1379.720040, 1379.720040, 0.000000, X, Y) && !ellipse(40003.949200, 32148.149400, 813.536023, 813.536023, 0.000000, X, Y) && !ellipse(42207.491333, 32657.905853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39613.960000, 31476.025200, 1976.280057, 1976.280057, 0.000000, X, Y) && !ellipse(38846.796000, 31147.332000, 1444.488042, 1444.488042, 0.000000, X, Y) && !ellipse(38812.555817, 33797.579834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39488.088196, 32841.347137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42502.321716, 31194.044830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40665.034000, 31478.202000, 988.984028, 988.984028, 0.000000, X, Y) && !ellipse(40423.202789, 30428.724670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39684.066528, 30585.788239, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 04:35:45 2012] Writing fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src30.gif
[Fri Jul  6 05:33:25 2012] Mean detx,y = (-16832.08, 8026.79) 
[Fri Jul  6 05:33:29 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 05:33:39 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 05:33:39 2012] Setting source spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jul  6 05:33:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Jul  6 07:20:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul  6 07:20:01 2012] rmf not generated due to insufficient counts
[Fri Jul  6 10:03:46 2012] Updating aperture counts using extracted products
[Fri Jul  6 10:03:46 2012] Error reading totcts from fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jul  6 10:03:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 10:03:48 2012] Using photon index=1.80, rate=0.00783, arf fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src30.arf
[Fri Jul  6 10:03:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 10:03:48 2012] Updating source flux to 7.3e-14
[Fri Jul  6 10:12:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting