[Thu Jul  5 07:09:38 2012] Detection parameters:
  Position = (427.2, 417.1) = 16 34 51.02 -47 25 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1167.2 +/- 52.6
  Background counts = 199.0
  Rate = 0.01 +/- 0.0006

[Thu Jul  5 07:09:39 2012] Off-axis axis estimate = 12.69'
[Thu Jul  5 07:14:53 2012] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 07:14:53 2012] Initial guess for spatial extent in simple fitting = 12.78"
[Thu Jul  5 07:14:53 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.037
[Thu Jul  5 07:14:53 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 12.78"
[Thu Jul  5 13:36:08 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src22.ximg exists
[Thu Jul  5 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src22.csv
[Thu Jul  5 13:36:08 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Jul  5 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src22.csv
[Thu Jul  5 13:36:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 13:36:10 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Jul  5 13:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu Jul  5 13:36:10 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Jul  5 13:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu Jul  5 13:36:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 17:04:11 2012] Warning, spatial fit 22 centroid is now closest to src. 23
[Thu Jul  5 17:04:11 2012] Spatial fit model total counts = 4786.940000, observed total counts = 4800.000000
[Thu Jul  5 17:04:11 2012] Offset between fit and detection position for source 22 = 7.717496 pixels
[Thu Jul  5 17:04:11 2012] Warning, changing simple spatial fit ID from 22 to 23
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 7.717496 pixels
  Position = (421.5, 411.9) = 16 34 53.46 -47 25 38.6
  Extent = 24.4 (23.7-48.8)", rotation angle = 0
  Source counts = 4109.8 +/- 64.1
  Background counts = 0.0
  Rate = 0.06 +/- 0.0009
 Deleting source due to low signal-to-noise ratio