[Thu Jul  5 07:09:38 2012] Detection parameters:
  Position = (438.1, 382.8) = 16 34 46.30 -47 27 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2074.5 +/- 60.7
  Background counts = 199.2
  Rate = 0.02 +/- 0.0007

[Thu Jul  5 07:09:39 2012] Off-axis axis estimate = 11.83'
[Thu Jul  5 07:14:53 2012] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 07:14:53 2012] Initial guess for spatial extent in simple fitting = 12.34"
[Thu Jul  5 07:14:53 2012] source mask rpix=2.8, npix_max = 44, mask sum = 28, frac = 0.628
[Thu Jul  5 07:14:53 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 12.34"
[Thu Jul  5 13:36:08 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src14.ximg exists
[Thu Jul  5 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src14.csv
[Thu Jul  5 13:36:08 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu Jul  5 13:36:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src14.csv
[Thu Jul  5 13:36:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 13:36:10 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu Jul  5 13:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu Jul  5 13:36:10 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Jul  5 13:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu Jul  5 13:36:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 17:04:11 2012] Spatial fit model total counts = 7894.090000, observed total counts = 6270.000000
[Thu Jul  5 17:04:11 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul  5 17:04:12 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 17:04:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 17:04:12 2012] Assessing source extent using major
[Thu Jul  5 17:04:12 2012] Source does appear to be extended
[Thu Jul  5 17:04:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 17:04:38 2012] Using EEF radius (= 12.34 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 17:04:38 2012] Initial guess for spatial extent in simple fitting = 12.34"
[Thu Jul  5 17:04:38 2012] source mask rpix=2.8, npix_max = 44, mask sum = 28, frac = 0.628
[Thu Jul  5 17:04:38 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 12.34"
[Fri Jul  6 01:28:57 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jul  6 01:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src12.csv
[Fri Jul  6 01:28:57 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jul  6 01:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src12.csv
[Fri Jul  6 01:28:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 01:28:58 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jul  6 01:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jul  6 01:28:58 2012] fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jul  6 01:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jul  6 01:28:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 04:35:18 2012] Warning, spatial fit 12 centroid is now closest to src. 27
[Fri Jul  6 04:35:18 2012] Source 14 is offset by 0.899655 and -4.005399 pixels which is larger than
2 X fitted extent = 2.590989 x 2.590989, not incorporating fit results
[Fri Jul  6 04:35:19 2012] Spatial fit model total counts = 6758.840000, observed total counts = 6757.000000
[Fri Jul  6 04:35:19 2012] Offset between fit and detection position for source 14 = 0.300475 pixels
[Fri Jul  6 04:35:19 2012] Warning, changing simple spatial fit ID from 12 to 44
[Fri Jul  6 04:35:19 2012] 4391.446000 total counts/ 3598.820000 bgd. counts: snr = 13.212599
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.300475 pixels
  Position = (438.1, 382.5) = 16 34 46.33 -47 27 46.4
  Extent = 8.7 (7.6-10.4)" x 4.8 (4.1-5.4)", rotation angle = 90
  Source counts = 792.6 +/- 66.3
  Background counts = 3598.8
  Rate = 0.01 +/- 0.0009
[Fri Jul  6 04:35:19 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:35:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:35:19 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 04:35:19 2012] Source does appear to be extended
[Fri Jul  6 04:35:19 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.41
[Fri Jul  6 04:35:44 2012] XMMSAS src. selection expression = ellipse(38061.876000, 33226.940000, 520.824615, 289.068008, 90.000000, X, Y)
[Fri Jul  6 04:35:44 2012] Writing source region out to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src14_src.reg
[Fri Jul  6 04:35:44 2012] Extracting stamp from image fullrun_pn_xmm0502140101_pi300-10000_cl_sm2.00.img.gz, (408, 353) - (468, 412)
[Fri Jul  6 04:35:44 2012] XMMSAS bgd. selection expression = annulus(38061.876000, 33226.940000, 868.041025, 1736.082050, X, Y) && !ellipse(39790.992080, 33569.457400, 823.752024, 823.752024, 0.000000, X, Y) && !ellipse(40708.192000, 33092.859400, 2144.872062, 304.212809, 6.036000, X, Y) && !ellipse(37770.369202, 33955.583282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40273.246000, 33255.058000, 2370.216068, 501.197614, 26.564700, X, Y) && !ellipse(39541.687660, 34055.337800, 651.658419, 651.658419, 0.000000, X, Y) && !ellipse(40294.218811, 34746.070465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38979.456000, 34701.432000, 2036.232059, 2036.232059, 0.000000, X, Y) && !ellipse(38739.222000, 35241.580000, 1090.544031, 1090.544031, 0.000000, X, Y) && !ellipse(39939.804260, 35454.081818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39517.180000, 32140.652000, 2004.792058, 2004.792058, 0.000000, X, Y) && !ellipse(41044.216000, 31437.788000, 1379.720040, 1379.720040, 0.000000, X, Y) && !ellipse(40003.949200, 32148.149400, 813.536023, 813.536023, 0.000000, X, Y) && !ellipse(37456.876000, 32199.422000, 763.038422, 763.038422, 0.000000, X, Y) && !ellipse(38338.202972, 31459.332703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36214.386000, 35371.686000, 1803.328052, 1803.328052, 0.000000, X, Y) && !ellipse(35502.414200, 34239.556000, 1093.712031, 1093.712031, 0.000000, X, Y) && !ellipse(35812.441742, 34830.691559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37243.868927, 33097.331787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36099.908000, 31352.440000, 1509.592043, 1509.592043, 0.000000, X, Y) && !ellipse(39613.960000, 31476.025200, 1976.280057, 1976.280057, 0.000000, X, Y) && !ellipse(36325.557000, 31253.327780, 2616.880075, 367.147211, 32.841000, X, Y) && !ellipse(38186.003418, 30681.610901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36578.484000, 31049.338000, 1779.320051, 256.080807, 25.917800, X, Y) && !ellipse(38846.796000, 31147.332000, 1444.488042, 1444.488042, 0.000000, X, Y) && !ellipse(37313.101471, 35450.194855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38812.555817, 33797.579834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39488.088196, 32841.347137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40665.034000, 31478.202000, 988.984028, 988.984028, 0.000000, X, Y)
[Fri Jul  6 04:35:44 2012] Writing fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src14.gif
[Fri Jul  6 05:03:29 2012] Mean detx,y = (-13272.14, 8750.36) 
[Fri Jul  6 05:03:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 05:03:43 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 05:03:43 2012] Setting source spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Jul  6 05:03:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Jul  6 10:03:43 2012] Updating aperture counts using extracted products
[Fri Jul  6 10:03:43 2012] Error reading totcts from fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Jul  6 10:03:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 10:03:47 2012] Using photon index=1.80, rate=0.011, arf fullrun_pn_xmm0502140101_pi300-10000_pass1_cl_src14.arf
[Fri Jul  6 10:03:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 10:03:48 2012] Getting flux using calc_pl_flux failed
[Fri Jul  6 10:12:45 2012] Flag b found in src. 14 procflags, skipping spectral fitting
[Fri Jul  6 10:12:45 2012] Flag p found in src. 14 procflags, skipping spectral fitting