[Thu Jul  5 07:10:13 2012] Detection parameters:
  Position = (416.0, 376.0) = 16 34 55.78 -47 28 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1938.2 +/- 57.2
  Background counts = 106.7
  Rate = 0.02 +/- 0.0006

[Thu Jul  5 07:10:13 2012] Off-axis axis estimate = 10.21'
[Thu Jul  5 15:38:51 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 15:38:51 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Thu Jul  5 15:38:51 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.906
[Thu Jul  5 15:38:51 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 11.53"
[Thu Jul  5 17:03:50 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src8.ximg exists
[Thu Jul  5 17:03:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src8.csv
[Thu Jul  5 17:03:50 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Jul  5 17:03:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src8.csv
[Thu Jul  5 17:03:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 17:03:50 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Jul  5 17:03:50 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jul  5 17:03:51 2012] Fit fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Jul  5 17:04:23 2012] Warning, spatial fit 8 centroid is now closest to src. 8
[Thu Jul  5 17:04:23 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 17:04:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 17:04:23 2012] Assessing source extent using major
[Thu Jul  5 17:04:23 2012] Source does appear to be extended
[Thu Jul  5 17:04:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 17:04:23 2012] Source is confused with source 2
[Fri Jul  6 03:22:06 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 03:22:06 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Fri Jul  6 03:22:06 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.906
[Fri Jul  6 03:22:06 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 11.53"
[Fri Jul  6 04:35:00 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jul  6 04:35:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_src8.csv
[Fri Jul  6 04:35:00 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jul  6 04:35:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_src8.csv
[Fri Jul  6 04:35:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 04:35:01 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jul  6 04:35:01 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jul  6 04:35:01 2012] Fit fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Jul  6 04:35:30 2012] Spatial fit model total counts = 7047.840000, observed total counts = 6868.000000
[Fri Jul  6 04:35:30 2012] Offset between fit and detection position for source 9 = 0.830768 pixels
[Fri Jul  6 04:35:30 2012] 6908.517000 total counts/ 6292.160000 bgd. counts: snr = 7.770205
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.830768 pixels
  Position = (415.5, 376.7) = 16 34 55.99 -47 28 11.9
  Extent = 5.7 (5.4-6.2)", rotation angle = 0
  Source counts = 616.4 +/- 83.1
  Background counts = 6292.2
  Rate = 0.007 +/- 0.001
[Fri Jul  6 04:35:31 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:35:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:35:31 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 04:35:31 2012] Source does appear to be extended
[Fri Jul  6 04:35:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 09:13:14 2012] XMMSAS src. selection expression = ellipse(36102.655800, 32721.991200, 344.857810, 344.857810, 0.000000, X, Y)
[Fri Jul  6 09:13:14 2012] Writing source region out to fullrun_mos2_xmm0502140101_pi300-10000_pass1_cl_src9_src.reg
[Fri Jul  6 09:13:14 2012] Extracting stamp from image fullrun_mos2_xmm0502140101_pi300-10000_cl_sm2.00.img.gz, (396, 357) - (435, 396)
[Fri Jul  6 09:13:14 2012] XMMSAS bgd. selection expression = annulus(36102.655800, 32721.991200, 574.763017, 1149.526033, X, Y) && !ellipse(37620.830000, 32839.266000, 842.720024, 842.720024, 0.000000, X, Y) && !ellipse(36703.666046, 32835.604309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37044.407196, 31791.285706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36178.215400, 32077.277400, 527.376815, 527.376815, 0.000000, X, Y) && !ellipse(37990.452545, 30926.192200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36779.645020, 32400.782196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37298.570496, 33097.929169, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 09:13:14 2012] Writing fullrun_mos2_xmm0502140101_pi300-10000_pass1_cl_src9.gif
[Fri Jul  6 09:20:30 2012] Mean detx,y = (11361.39, -8481.50) 
[Fri Jul  6 09:20:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 09:20:38 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 09:20:39 2012] Setting source spectrum file to fullrun_mos2_xmm0502140101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jul  6 09:20:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502140101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Jul  6 10:03:52 2012] Updating aperture counts using extracted products
[Fri Jul  6 10:03:52 2012] Error reading totcts from fullrun_mos2_xmm0502140101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jul  6 10:03:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 10:03:52 2012] Using photon index=1.80, rate=0.00724, arf fullrun_mos2_xmm0502140101_pi300-10000_pass1_cl_src9.arf
[Fri Jul  6 10:03:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 10:03:53 2012] Updating source flux to 2.2e-13
[Fri Jul  6 10:10:04 2012] Flag c found in src. 9 procflags, skipping spectral fitting