[Thu Jul  5 07:10:13 2012] Detection parameters:
  Position = (193.6, 320.8) = 16 36 31.23 -47 32 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.5 +/- 20.9
  Background counts = 90.7
  Rate = 0.002 +/- 0.0003

[Thu Jul  5 07:10:13 2012] Off-axis axis estimate = 7.77'
[Thu Jul  5 15:38:51 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 15:38:51 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Thu Jul  5 15:38:51 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.092
[Thu Jul  5 15:38:51 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 10.31"
[Thu Jul  5 17:03:50 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src18.ximg exists
[Thu Jul  5 17:03:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src18.csv
[Thu Jul  5 17:03:50 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Jul  5 17:03:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src18.csv
[Thu Jul  5 17:03:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 17:03:51 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Jul  5 17:03:51 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Jul  5 17:03:51 2012] Fit fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Thu Jul  5 17:04:23 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.128792 pixels away
[Thu Jul  5 17:04:23 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 17:04:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 17:04:23 2012] Assessing source extent using major
[Thu Jul  5 17:04:23 2012] Source does appear to be extended
[Thu Jul  5 17:04:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 03:22:06 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 03:22:06 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Fri Jul  6 03:22:06 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.092
[Fri Jul  6 03:22:06 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 10.31"
[Fri Jul  6 04:35:00 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jul  6 04:35:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_src17.csv
[Fri Jul  6 04:35:00 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jul  6 04:35:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_src17.csv
[Fri Jul  6 04:35:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 04:35:01 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jul  6 04:35:01 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jul  6 04:35:01 2012] Fit fullrun_mos2_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jul  6 04:35:30 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.128792 pixels away
[Fri Jul  6 04:35:31 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:35:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:35:31 2012] Assessing source extent using major
[Fri Jul  6 04:35:31 2012] Source does appear to be extended
[Fri Jul  6 04:35:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 09:13:14 2012] XMMSAS src. selection expression = ellipse(16798.361816, 27859.110321, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul  6 09:13:14 2012] Writing source region out to fullrun_mos2_xmm0502140101_pi300-10000_pass1_cl_src21_src.reg
[Fri Jul  6 09:13:14 2012] Extracting stamp from image fullrun_mos2_xmm0502140101_pi300-10000_cl_sm2.00.img.gz, (156, 283) - (231, 358)
[Fri Jul  6 09:13:14 2012] XMMSAS bgd. selection expression = annulus(16798.361816, 27859.110321, 1087.500000, 2175.000000, X, Y) && !ellipse(17846.752200, 28866.690800, 502.497614, 502.497614, 0.000000, X, Y)
[Fri Jul  6 09:13:14 2012] Writing fullrun_mos2_xmm0502140101_pi300-10000_pass1_cl_src21.gif
[Fri Jul  6 09:23:26 2012] Mean detx,y = (-7935.36, -3519.62) 
[Fri Jul  6 09:23:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 09:23:39 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 09:23:39 2012] Setting source spectrum file to fullrun_mos2_xmm0502140101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jul  6 09:23:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0502140101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri Jul  6 09:56:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul  6 09:56:20 2012] rmf not generated due to insufficient counts
[Fri Jul  6 10:03:52 2012] Updating aperture counts using extracted products
[Fri Jul  6 10:03:52 2012] Error reading totcts from fullrun_mos2_xmm0502140101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jul  6 10:03:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 10:03:53 2012] Using photon index=1.80, rate=0.00246, arf fullrun_mos2_xmm0502140101_pi300-10000_pass1_cl_src21.arf
[Fri Jul  6 10:03:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 10:03:53 2012] Updating source flux to 3.6e-14
[Fri Jul  6 10:10:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting