[Thu Jul  5 07:10:13 2012] Detection parameters:
  Position = (137.1, 179.0) = 16 36 55.75 -47 42 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 355.5 +/- 25.7
  Background counts = 64.1
  Rate = 0.004 +/- 0.0003

[Thu Jul  5 07:10:13 2012] Off-axis axis estimate = 14.55'
[Thu Jul  5 15:38:51 2012] Using EEF radius (= 13.71 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 15:38:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  5 15:38:51 2012] Initial guess for spatial extent in simple fitting = 13.71"
[Thu Jul  5 15:38:51 2012] source mask rpix=3.2, npix_max = 53, mask sum = 58, frac = 1.088
[Thu Jul  5 15:38:51 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.71"
[Thu Jul  5 17:03:50 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jul  5 17:03:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src11.csv
[Thu Jul  5 17:03:50 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jul  5 17:03:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src11.csv
[Thu Jul  5 17:03:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 17:03:51 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jul  5 17:03:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu Jul  5 17:03:51 2012] fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jul  5 17:03:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu Jul  5 17:03:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 17:04:23 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 17.698744 pixels away
[Thu Jul  5 17:04:23 2012] Spatial fit model total counts = 946.363000, observed total counts = 948.000000
[Thu Jul  5 17:04:23 2012] Offset between fit and detection position for source 11 = 2.267644 pixels
[Thu Jul  5 17:04:23 2012] Warning, changing simple spatial fit ID from 11 to 12
[Thu Jul  5 17:04:23 2012] 956.863800 total counts/ 926.929000 bgd. counts: snr = 0.983225
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 2.267644 pixels
  Position = (136.1, 181.1) = 16 36 56.16 -47 42 22.2
  Extent = 8.9 (3.6-13.4)", rotation angle = 0
  Source counts = 29.9 +/- 30.9
  Background counts = 926.9
  Rate = 0.0004 +/- 0.0004
  Deleting source due to low Poisson probability