[Thu Jul  5 07:09:56 2012] Detection parameters:
  Position = (433.4, 373.0) = 16 34 48.31 -47 28 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3807.7 +/- 76.9
  Background counts = 112.6
  Rate = 0.04 +/- 0.0008

[Thu Jul  5 07:09:57 2012] Off-axis axis estimate = 11.18'
[Thu Jul  5 13:36:11 2012] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 13:36:11 2012] Initial guess for spatial extent in simple fitting = 12.02"
[Thu Jul  5 13:36:11 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.986
[Thu Jul  5 13:36:11 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.02"
[Thu Jul  5 15:38:50 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jul  5 15:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src3.csv
[Thu Jul  5 15:38:50 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jul  5 15:38:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src3.csv
[Thu Jul  5 15:38:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 15:38:51 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jul  5 15:38:51 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jul  5 15:38:51 2012] Fit fullrun_mos1_xmm0502140101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jul  5 17:04:19 2012] Warning, spatial fit 3 centroid is now closest to src. 21
[Thu Jul  5 17:04:19 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.281416 pixels away
[Thu Jul  5 17:04:19 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.214330 pixels away
[Thu Jul  5 17:04:19 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 17:04:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 17:04:19 2012] Assessing source extent using major
[Thu Jul  5 17:04:19 2012] Source does appear to be extended
[Thu Jul  5 17:04:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 17:04:19 2012] Source is confused with source 11
[Thu Jul  5 17:04:19 2012] Source is confused with source 2
[Fri Jul  6 01:29:00 2012] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Fri Jul  6 01:29:00 2012] Initial guess for spatial extent in simple fitting = 12.02"
[Fri Jul  6 01:29:00 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.986
[Fri Jul  6 01:29:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.02"
[Fri Jul  6 03:22:05 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul  6 03:22:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src3.csv
[Fri Jul  6 03:22:05 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul  6 03:22:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src3.csv
[Fri Jul  6 03:22:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 03:22:05 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul  6 03:22:05 2012] fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul  6 03:22:05 2012] Fit fullrun_mos1_xmm0502140101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul  6 04:35:25 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.387813 pixels away
[Fri Jul  6 04:35:25 2012] Warning, spatial fit 3 centroid is now closest to src. 21
[Fri Jul  6 04:35:25 2012] Spatial fit model total counts = 7106.410000, observed total counts = 6947.000000
[Fri Jul  6 04:35:25 2012] Offset between fit and detection position for source 5 = 2.585819 pixels
[Fri Jul  6 04:35:25 2012] Warning, changing simple spatial fit ID from 3 to 5
[Fri Jul  6 04:35:25 2012] 5014.306000 total counts/ 410.346000 bgd. counts: snr = 227.277498
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.585819 pixels
  Position = (432.4, 375.4) = 16 34 48.77 -47 28 17.3
  Extent = 13.6 (13.1-14.3)", rotation angle = 0
  Source counts = 4604.0 +/- 70.8
  Background counts = 410.3
  Rate = 0.05 +/- 0.0008
[Fri Jul  6 04:35:25 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 04:35:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 04:35:25 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 04:35:25 2012] Source does appear to be extended
[Fri Jul  6 04:35:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 07:58:59 2012] Counts = 4603.960000, rescaling region sizes by 2.000000
[Fri Jul  6 07:58:59 2012] XMMSAS src. selection expression = ellipse(37566.600800, 32609.002000, 1636.740047, 1636.740047, 0.000000, X, Y)
[Fri Jul  6 07:58:59 2012] Writing source region out to fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src5_src.reg
[Fri Jul  6 07:58:59 2012] Extracting stamp from image fullrun_mos1_xmm0502140101_pi300-10000_cl_sm2.00.img.gz, (338, 281) - (526, 469)
[Fri Jul  6 07:58:59 2012] XMMSAS bgd. selection expression = annulus(37566.600800, 32609.002000, 5455.800157, 10911.600314, X, Y) && !ellipse(39396.842804, 32749.541534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38924.202454, 33268.690033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37828.282420, 32167.270800, 2384.144069, 480.519214, 56.285000, X, Y) && !ellipse(37501.308533, 32921.404236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36436.721200, 30979.329600, 483.392014, 483.392014, 0.000000, X, Y) && !ellipse(36340.020000, 31111.884000, 663.885619, 663.885619, 0.000000, X, Y) && !ellipse(35993.989990, 32052.596344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36005.457062, 30410.365143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36873.338348, 30574.297272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35101.857200, 32018.552000, 823.064024, 823.064024, 0.000000, X, Y) && !ellipse(33735.654000, 31348.894000, 1517.448044, 1517.448044, 0.000000, X, Y) && !ellipse(35578.679400, 30837.192800, 577.566417, 577.566417, 0.000000, X, Y) && !ellipse(33993.483826, 30836.600891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36744.704834, 29972.957031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34015.294891, 33532.161865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35639.777300, 29269.223200, 510.152015, 510.152015, 0.000000, X, Y) && !ellipse(35392.409400, 33831.164400, 334.026410, 334.026410, 0.000000, X, Y) && !ellipse(27919.435117, 24418.071624, 1626.888047, 449.070964, 0.696265, X, Y) && !ellipse(40079.679169, 31738.248840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40870.854004, 29546.944305, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 07:58:59 2012] Writing fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src5.gif
[Fri Jul  6 08:02:15 2012] Mean detx,y = (-8090.89, -13371.39) 
[Fri Jul  6 08:02:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 08:04:38 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 08:04:38 2012] Setting source spectrum file to fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul  6 08:04:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jul  6 10:03:49 2012] Updating aperture counts using extracted products
[Fri Jul  6 10:03:49 2012] Error reading totcts from fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul  6 10:03:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 10:03:51 2012] Using photon index=1.80, rate=0.0543, arf fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src5.arf
[Fri Jul  6 10:03:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 10:03:51 2012] Updating source flux to 1.4e-12
[Fri Jul  6 10:03:55 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Fri Jul  6 10:10:04 2012] Reading fit data from xmm0502140101/analysis//spectral/fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src5_pl.csv
[Fri Jul  6 10:10:04 2012] Spectral fit parameter nH value = 1.13784e+23
[Fri Jul  6 10:10:04 2012] Spectral fit parameter PhoIndex value = 3.01181
[Fri Jul  6 10:10:04 2012] Failed to get F(0.3-8.0) from xmm0502140101/analysis//spectral/fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Fri Jul  6 10:10:04 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 10:10:04 2012] Using Nh = 1.1e+23, photon index=3.01, rate=0.0543, arf fullrun_mos1_xmm0502140101_pi300-10000_pass1_cl_src5.arf
[Fri Jul  6 10:10:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 10:10:04 2012] Updating source flux to 4e-12